[PATCH] ARM: dts: socfpga: Enable QSPI on the Arria5 devkit

dinguyen at opensource.altera.com dinguyen at opensource.altera.com
Wed Oct 19 13:52:30 PDT 2016


From: Dinh Nguyen <dinguyen at opensource.altera.com>

Enable the QSPI node and add the flash chip.

Signed-off-by: Dinh Nguyen <dinguyen at opensource.altera.com>
---
 arch/arm/boot/dts/socfpga_arria5_socdk.dts |   33 ++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index 3c88678..f739ead 100644
--- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -82,6 +82,39 @@
 	status = "okay";
 };
 
+&qspi {
+	status = "okay";
+
+	flash: flash at 0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q256a";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition at qspi-boot {
+			/* 8MB for raw data. */
+			label = "Flash 0 Raw Data";
+			reg = <0x0 0x800000>;
+		};
+
+		partition at qspi-rootfs {
+			/* 120MB for jffs2 data. */
+			label = "Flash 0 jffs2 Filesystem";
+			reg = <0x800000 0x7800000>;
+		};
+	};
+};
+
 &usb1 {
 	status = "okay";
 };
-- 
1.7.9.5




More information about the linux-arm-kernel mailing list