[PATCH V6 07/10] dmaengine: qcom_hidma: add a common API to setup the interrupt
Sinan Kaya
okaya at codeaurora.org
Wed Oct 19 10:51:49 PDT 2016
Introducing the hidma_ll_setup_irq function to set up the interrupt
type externally from the OS interface.
Signed-off-by: Sinan Kaya <okaya at codeaurora.org>
---
drivers/dma/qcom/hidma.h | 2 ++
drivers/dma/qcom/hidma_ll.c | 27 +++++++++++++++++++++++----
2 files changed, 25 insertions(+), 4 deletions(-)
diff --git a/drivers/dma/qcom/hidma.h b/drivers/dma/qcom/hidma.h
index 8318de7..7b40014 100644
--- a/drivers/dma/qcom/hidma.h
+++ b/drivers/dma/qcom/hidma.h
@@ -46,6 +46,7 @@ struct hidma_tre {
};
struct hidma_lldev {
+ bool msi_support; /* flag indicating MSI support */
bool initialized; /* initialized flag */
u8 trch_state; /* trch_state of the device */
u8 evch_state; /* evch_state of the device */
@@ -148,6 +149,7 @@ int hidma_ll_request(struct hidma_lldev *llhndl, u32 dev_id,
int hidma_ll_enable(struct hidma_lldev *llhndl);
void hidma_ll_set_transfer_params(struct hidma_lldev *llhndl, u32 tre_ch,
dma_addr_t src, dma_addr_t dest, u32 len, u32 flags);
+void hidma_ll_setup_irq(struct hidma_lldev *lldev, bool msi);
int hidma_ll_setup(struct hidma_lldev *lldev);
struct hidma_lldev *hidma_ll_init(struct device *dev, u32 max_channels,
void __iomem *trca, void __iomem *evca,
diff --git a/drivers/dma/qcom/hidma_ll.c b/drivers/dma/qcom/hidma_ll.c
index 6bdea90..3168687 100644
--- a/drivers/dma/qcom/hidma_ll.c
+++ b/drivers/dma/qcom/hidma_ll.c
@@ -694,17 +694,36 @@ int hidma_ll_setup(struct hidma_lldev *lldev)
writel(HIDMA_EVRE_SIZE * nr_tres,
lldev->evca + HIDMA_EVCA_RING_LEN_REG);
- /* support IRQ only for now */
+ /* configure interrupts */
+ hidma_ll_setup_irq(lldev, lldev->msi_support);
+
+ rc = hidma_ll_enable(lldev);
+ if (rc)
+ return rc;
+
+ return rc;
+}
+
+void hidma_ll_setup_irq(struct hidma_lldev *lldev, bool msi)
+{
+ u32 val;
+
+ lldev->msi_support = msi;
+
+ /* disable interrupts again after reset */
+ writel(0, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
+ writel(0, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
+
+ /* support IRQ by default */
val = readl(lldev->evca + HIDMA_EVCA_INTCTRL_REG);
val &= ~0xF;
- val |= 0x1;
+ if (!lldev->msi_support)
+ val = val | 0x1;
writel(val, lldev->evca + HIDMA_EVCA_INTCTRL_REG);
/* clear all pending interrupts and enable them */
writel(ENABLE_IRQS, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
writel(ENABLE_IRQS, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
-
- return hidma_ll_enable(lldev);
}
struct hidma_lldev *hidma_ll_init(struct device *dev, u32 nr_tres,
--
1.9.1
More information about the linux-arm-kernel
mailing list