[PATCH V4 4/5] firmware: ti_sci: Add support for Clock control
Nishanth Menon
nm at ti.com
Tue Oct 18 16:08:36 PDT 2016
Texas Instrument's System Control Interface (TI-SCI) Message Protocol
is used in Texas Instrument's System on Chip (SoC) such as those
in keystone family K2G SoC to communicate between various compute
processors with a central system controller entity.
TI-SCI message protocol provides support for management of various
hardware entities within the SoC. Add support driver to allow
communication with system controller entity within the SoC using the
mailbox client.
In general, we expect to function at a device level of abstraction,
however, for proper operation of hardware blocks, many clocks directly
supplying the hardware block needs to be queried or configured.
Introduce support for the set of SCI message protocol support that
provide us with this capability.
Signed-off-by: Nishanth Menon <nm at ti.com>
---
Changes since v3: none
V3: https://patchwork.kernel.org/patch/9317841/
drivers/firmware/ti_sci.c | 685 +++++++++++++++++++++++++++++++++
drivers/firmware/ti_sci.h | 289 ++++++++++++++
include/linux/soc/ti/ti_sci_protocol.h | 78 ++++
3 files changed, 1052 insertions(+)
diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
index c7b25ccf6f07..496a007e5c69 100644
--- a/drivers/firmware/ti_sci.c
+++ b/drivers/firmware/ti_sci.c
@@ -902,6 +902,675 @@ static int ti_sci_cmd_get_device_resets(const struct ti_sci_handle *handle,
NULL);
}
+/**
+ * ti_sci_set_clock_state() - Set clock state helper
+ * @handle: pointer to TI SCI handle
+ * @dev_id: Device identifier this request is for
+ * @clk_id: Clock identifier for the device for this request.
+ * Each device has it's own set of clock inputs. This indexes
+ * which clock input to modify.
+ * @flags: Header flags as needed
+ * @state: State to request for the clock.
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_set_clock_state(const struct ti_sci_handle *handle,
+ u32 dev_id, u8 clk_id,
+ u32 flags, u8 state)
+{
+ struct ti_sci_info *info;
+ struct ti_sci_msg_req_set_clock_state *req;
+ struct ti_sci_msg_hdr *resp;
+ struct ti_sci_xfer *xfer;
+ struct device *dev;
+ int ret = 0;
+
+ if (IS_ERR(handle))
+ return PTR_ERR(handle);
+ if (!handle)
+ return -EINVAL;
+
+ info = handle_to_ti_sci_info(handle);
+ dev = info->dev;
+
+ xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_CLOCK_STATE,
+ flags | TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+ sizeof(*req), sizeof(*resp));
+ if (IS_ERR(xfer)) {
+ ret = PTR_ERR(xfer);
+ dev_err(dev, "Message alloc failed(%d)\n", ret);
+ return ret;
+ }
+ req = (struct ti_sci_msg_req_set_clock_state *)xfer->xfer_buf;
+ req->dev_id = dev_id;
+ req->clk_id = clk_id;
+ req->request_state = state;
+
+ ret = ti_sci_do_xfer(info, xfer);
+ if (ret) {
+ dev_err(dev, "Mbox send fail %d\n", ret);
+ goto fail;
+ }
+
+ resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
+
+ ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV;
+
+fail:
+ ti_sci_put_one_xfer(&info->minfo, xfer);
+
+ return ret;
+}
+
+/**
+ * ti_sci_cmd_get_clock_state() - Get clock state helper
+ * @handle: pointer to TI SCI handle
+ * @dev_id: Device identifier this request is for
+ * @clk_id: Clock identifier for the device for this request.
+ * Each device has it's own set of clock inputs. This indexes
+ * which clock input to modify.
+ * @programmed_state: State requested for clock to move to
+ * @current_state: State that the clock is currently in
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_get_clock_state(const struct ti_sci_handle *handle,
+ u32 dev_id, u8 clk_id,
+ u8 *programmed_state, u8 *current_state)
+{
+ struct ti_sci_info *info;
+ struct ti_sci_msg_req_get_clock_state *req;
+ struct ti_sci_msg_resp_get_clock_state *resp;
+ struct ti_sci_xfer *xfer;
+ struct device *dev;
+ int ret = 0;
+
+ if (IS_ERR(handle))
+ return PTR_ERR(handle);
+ if (!handle)
+ return -EINVAL;
+
+ if (!programmed_state && !current_state)
+ return -EINVAL;
+
+ info = handle_to_ti_sci_info(handle);
+ dev = info->dev;
+
+ xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_CLOCK_STATE,
+ TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+ sizeof(*req), sizeof(*resp));
+ if (IS_ERR(xfer)) {
+ ret = PTR_ERR(xfer);
+ dev_err(dev, "Message alloc failed(%d)\n", ret);
+ return ret;
+ }
+ req = (struct ti_sci_msg_req_get_clock_state *)xfer->xfer_buf;
+ req->dev_id = dev_id;
+ req->clk_id = clk_id;
+
+ ret = ti_sci_do_xfer(info, xfer);
+ if (ret) {
+ dev_err(dev, "Mbox send fail %d\n", ret);
+ goto fail;
+ }
+
+ resp = (struct ti_sci_msg_resp_get_clock_state *)xfer->xfer_buf;
+
+ if (!ti_sci_is_response_ack(resp)) {
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ if (programmed_state)
+ *programmed_state = resp->programmed_state;
+ if (current_state)
+ *current_state = resp->current_state;
+
+fail:
+ ti_sci_put_one_xfer(&info->minfo, xfer);
+
+ return ret;
+}
+
+/**
+ * ti_sci_cmd_get_clock() - Get control of a clock from TI SCI
+ * @handle: pointer to TI SCI handle
+ * @dev_id: Device identifier this request is for
+ * @clk_id: Clock identifier for the device for this request.
+ * Each device has it's own set of clock inputs. This indexes
+ * which clock input to modify.
+ * @needs_ssc: 'true' if Spread Spectrum clock is desired, else 'false'
+ * @can_change_freq: 'true' if frequency change is desired, else 'false'
+ * @enable_input_term: 'true' if input termination is desired, else 'false'
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_get_clock(const struct ti_sci_handle *handle, u32 dev_id,
+ u8 clk_id, bool needs_ssc, bool can_change_freq,
+ bool enable_input_term)
+{
+ u32 flags = 0;
+
+ flags |= needs_ssc ? MSG_FLAG_CLOCK_ALLOW_SSC : 0;
+ flags |= can_change_freq ? MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE : 0;
+ flags |= enable_input_term ? MSG_FLAG_CLOCK_INPUT_TERM : 0;
+
+ return ti_sci_set_clock_state(handle, dev_id, clk_id, flags,
+ MSG_CLOCK_SW_STATE_REQ);
+}
+
+/**
+ * ti_sci_cmd_idle_clock() - Idle a clock which is in our control
+ * @handle: pointer to TI SCI handle
+ * @dev_id: Device identifier this request is for
+ * @clk_id: Clock identifier for the device for this request.
+ * Each device has it's own set of clock inputs. This indexes
+ * which clock input to modify.
+ *
+ * NOTE: This clock must have been requested by get_clock previously.
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_idle_clock(const struct ti_sci_handle *handle,
+ u32 dev_id, u8 clk_id)
+{
+ return ti_sci_set_clock_state(handle, dev_id, clk_id, 0,
+ MSG_CLOCK_SW_STATE_UNREQ);
+}
+
+/**
+ * ti_sci_cmd_put_clock() - Release a clock from our control back to TISCI
+ * @handle: pointer to TI SCI handle
+ * @dev_id: Device identifier this request is for
+ * @clk_id: Clock identifier for the device for this request.
+ * Each device has it's own set of clock inputs. This indexes
+ * which clock input to modify.
+ *
+ * NOTE: This clock must have been requested by get_clock previously.
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_put_clock(const struct ti_sci_handle *handle,
+ u32 dev_id, u8 clk_id)
+{
+ return ti_sci_set_clock_state(handle, dev_id, clk_id, 0,
+ MSG_CLOCK_SW_STATE_AUTO);
+}
+
+/**
+ * ti_sci_cmd_clk_is_auto() - Is the clock being auto managed
+ * @handle: pointer to TI SCI handle
+ * @dev_id: Device identifier this request is for
+ * @clk_id: Clock identifier for the device for this request.
+ * Each device has it's own set of clock inputs. This indexes
+ * which clock input to modify.
+ * @req_state: state indicating if the clock is auto managed
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_clk_is_auto(const struct ti_sci_handle *handle,
+ u32 dev_id, u8 clk_id, bool *req_state)
+{
+ u8 state = 0;
+ int ret;
+
+ if (!req_state)
+ return -EINVAL;
+
+ ret = ti_sci_cmd_get_clock_state(handle, dev_id, clk_id, &state, NULL);
+ if (ret)
+ return ret;
+
+ *req_state = (state == MSG_CLOCK_SW_STATE_AUTO);
+ return 0;
+}
+
+/**
+ * ti_sci_cmd_clk_is_on() - Is the clock ON
+ * @handle: pointer to TI SCI handle
+ * @dev_id: Device identifier this request is for
+ * @clk_id: Clock identifier for the device for this request.
+ * Each device has it's own set of clock inputs. This indexes
+ * which clock input to modify.
+ * @req_state: state indicating if the clock is managed by us and enabled
+ * @curr_state: state indicating if the clock is ready for operation
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_clk_is_on(const struct ti_sci_handle *handle, u32 dev_id,
+ u8 clk_id, bool *req_state, bool *curr_state)
+{
+ u8 c_state = 0, r_state = 0;
+ int ret;
+
+ if (!req_state && !curr_state)
+ return -EINVAL;
+
+ ret = ti_sci_cmd_get_clock_state(handle, dev_id, clk_id,
+ &r_state, &c_state);
+ if (ret)
+ return ret;
+
+ if (req_state)
+ *req_state = (r_state == MSG_CLOCK_SW_STATE_REQ);
+ if (curr_state)
+ *curr_state = (c_state == MSG_CLOCK_HW_STATE_READY);
+ return 0;
+}
+
+/**
+ * ti_sci_cmd_clk_is_off() - Is the clock OFF
+ * @handle: pointer to TI SCI handle
+ * @dev_id: Device identifier this request is for
+ * @clk_id: Clock identifier for the device for this request.
+ * Each device has it's own set of clock inputs. This indexes
+ * which clock input to modify.
+ * @req_state: state indicating if the clock is managed by us and disabled
+ * @curr_state: state indicating if the clock is NOT ready for operation
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_clk_is_off(const struct ti_sci_handle *handle, u32 dev_id,
+ u8 clk_id, bool *req_state, bool *curr_state)
+{
+ u8 c_state = 0, r_state = 0;
+ int ret;
+
+ if (!req_state && !curr_state)
+ return -EINVAL;
+
+ ret = ti_sci_cmd_get_clock_state(handle, dev_id, clk_id,
+ &r_state, &c_state);
+ if (ret)
+ return ret;
+
+ if (req_state)
+ *req_state = (r_state == MSG_CLOCK_SW_STATE_UNREQ);
+ if (curr_state)
+ *curr_state = (c_state == MSG_CLOCK_HW_STATE_NOT_READY);
+ return 0;
+}
+
+/**
+ * ti_sci_cmd_clk_set_parent() - Set the clock source of a specific device clock
+ * @handle: pointer to TI SCI handle
+ * @dev_id: Device identifier this request is for
+ * @clk_id: Clock identifier for the device for this request.
+ * Each device has it's own set of clock inputs. This indexes
+ * which clock input to modify.
+ * @parent_id: Parent clock identifier to set
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_clk_set_parent(const struct ti_sci_handle *handle,
+ u32 dev_id, u8 clk_id, u8 parent_id)
+{
+ struct ti_sci_info *info;
+ struct ti_sci_msg_req_set_clock_parent *req;
+ struct ti_sci_msg_hdr *resp;
+ struct ti_sci_xfer *xfer;
+ struct device *dev;
+ int ret = 0;
+
+ if (IS_ERR(handle))
+ return PTR_ERR(handle);
+ if (!handle)
+ return -EINVAL;
+
+ info = handle_to_ti_sci_info(handle);
+ dev = info->dev;
+
+ xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_CLOCK_PARENT,
+ TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+ sizeof(*req), sizeof(*resp));
+ if (IS_ERR(xfer)) {
+ ret = PTR_ERR(xfer);
+ dev_err(dev, "Message alloc failed(%d)\n", ret);
+ return ret;
+ }
+ req = (struct ti_sci_msg_req_set_clock_parent *)xfer->xfer_buf;
+ req->dev_id = dev_id;
+ req->clk_id = clk_id;
+ req->parent_id = parent_id;
+
+ ret = ti_sci_do_xfer(info, xfer);
+ if (ret) {
+ dev_err(dev, "Mbox send fail %d\n", ret);
+ goto fail;
+ }
+
+ resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
+
+ ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV;
+
+fail:
+ ti_sci_put_one_xfer(&info->minfo, xfer);
+
+ return ret;
+}
+
+/**
+ * ti_sci_cmd_clk_get_parent() - Get current parent clock source
+ * @handle: pointer to TI SCI handle
+ * @dev_id: Device identifier this request is for
+ * @clk_id: Clock identifier for the device for this request.
+ * Each device has it's own set of clock inputs. This indexes
+ * which clock input to modify.
+ * @parent_id: Current clock parent
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_clk_get_parent(const struct ti_sci_handle *handle,
+ u32 dev_id, u8 clk_id, u8 *parent_id)
+{
+ struct ti_sci_info *info;
+ struct ti_sci_msg_req_get_clock_parent *req;
+ struct ti_sci_msg_resp_get_clock_parent *resp;
+ struct ti_sci_xfer *xfer;
+ struct device *dev;
+ int ret = 0;
+
+ if (IS_ERR(handle))
+ return PTR_ERR(handle);
+ if (!handle || !parent_id)
+ return -EINVAL;
+
+ info = handle_to_ti_sci_info(handle);
+ dev = info->dev;
+
+ xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_CLOCK_PARENT,
+ TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+ sizeof(*req), sizeof(*resp));
+ if (IS_ERR(xfer)) {
+ ret = PTR_ERR(xfer);
+ dev_err(dev, "Message alloc failed(%d)\n", ret);
+ return ret;
+ }
+ req = (struct ti_sci_msg_req_get_clock_parent *)xfer->xfer_buf;
+ req->dev_id = dev_id;
+ req->clk_id = clk_id;
+
+ ret = ti_sci_do_xfer(info, xfer);
+ if (ret) {
+ dev_err(dev, "Mbox send fail %d\n", ret);
+ goto fail;
+ }
+
+ resp = (struct ti_sci_msg_resp_get_clock_parent *)xfer->xfer_buf;
+
+ if (!ti_sci_is_response_ack(resp))
+ ret = -ENODEV;
+ else
+ *parent_id = resp->parent_id;
+
+fail:
+ ti_sci_put_one_xfer(&info->minfo, xfer);
+
+ return ret;
+}
+
+/**
+ * ti_sci_cmd_clk_get_num_parents() - Get num parents of the current clk source
+ * @handle: pointer to TI SCI handle
+ * @dev_id: Device identifier this request is for
+ * @clk_id: Clock identifier for the device for this request.
+ * Each device has it's own set of clock inputs. This indexes
+ * which clock input to modify.
+ * @num_parents: Returns he number of parents to the current clock.
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_clk_get_num_parents(const struct ti_sci_handle *handle,
+ u32 dev_id, u8 clk_id,
+ u8 *num_parents)
+{
+ struct ti_sci_info *info;
+ struct ti_sci_msg_req_get_clock_num_parents *req;
+ struct ti_sci_msg_resp_get_clock_num_parents *resp;
+ struct ti_sci_xfer *xfer;
+ struct device *dev;
+ int ret = 0;
+
+ if (IS_ERR(handle))
+ return PTR_ERR(handle);
+ if (!handle || !num_parents)
+ return -EINVAL;
+
+ info = handle_to_ti_sci_info(handle);
+ dev = info->dev;
+
+ xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_NUM_CLOCK_PARENTS,
+ TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+ sizeof(*req), sizeof(*resp));
+ if (IS_ERR(xfer)) {
+ ret = PTR_ERR(xfer);
+ dev_err(dev, "Message alloc failed(%d)\n", ret);
+ return ret;
+ }
+ req = (struct ti_sci_msg_req_get_clock_num_parents *)xfer->xfer_buf;
+ req->dev_id = dev_id;
+ req->clk_id = clk_id;
+
+ ret = ti_sci_do_xfer(info, xfer);
+ if (ret) {
+ dev_err(dev, "Mbox send fail %d\n", ret);
+ goto fail;
+ }
+
+ resp = (struct ti_sci_msg_resp_get_clock_num_parents *)xfer->xfer_buf;
+
+ if (!ti_sci_is_response_ack(resp))
+ ret = -ENODEV;
+ else
+ *num_parents = resp->num_parents;
+
+fail:
+ ti_sci_put_one_xfer(&info->minfo, xfer);
+
+ return ret;
+}
+
+/**
+ * ti_sci_cmd_clk_get_match_freq() - Find a good match for frequency
+ * @handle: pointer to TI SCI handle
+ * @dev_id: Device identifier this request is for
+ * @clk_id: Clock identifier for the device for this request.
+ * Each device has it's own set of clock inputs. This indexes
+ * which clock input to modify.
+ * @min_freq: The minimum allowable frequency in Hz. This is the minimum
+ * allowable programmed frequency and does not account for clock
+ * tolerances and jitter.
+ * @target_freq: The target clock frequency in Hz. A frequency will be
+ * processed as close to this target frequency as possible.
+ * @max_freq: The maximum allowable frequency in Hz. This is the maximum
+ * allowable programmed frequency and does not account for clock
+ * tolerances and jitter.
+ * @match_freq: Frequency match in Hz response.
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_clk_get_match_freq(const struct ti_sci_handle *handle,
+ u32 dev_id, u8 clk_id, u64 min_freq,
+ u64 target_freq, u64 max_freq,
+ u64 *match_freq)
+{
+ struct ti_sci_info *info;
+ struct ti_sci_msg_req_query_clock_freq *req;
+ struct ti_sci_msg_resp_query_clock_freq *resp;
+ struct ti_sci_xfer *xfer;
+ struct device *dev;
+ int ret = 0;
+
+ if (IS_ERR(handle))
+ return PTR_ERR(handle);
+ if (!handle || !match_freq)
+ return -EINVAL;
+
+ info = handle_to_ti_sci_info(handle);
+ dev = info->dev;
+
+ xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_QUERY_CLOCK_FREQ,
+ TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+ sizeof(*req), sizeof(*resp));
+ if (IS_ERR(xfer)) {
+ ret = PTR_ERR(xfer);
+ dev_err(dev, "Message alloc failed(%d)\n", ret);
+ return ret;
+ }
+ req = (struct ti_sci_msg_req_query_clock_freq *)xfer->xfer_buf;
+ req->dev_id = dev_id;
+ req->clk_id = clk_id;
+ req->min_freq_hz = min_freq;
+ req->target_freq_hz = target_freq;
+ req->max_freq_hz = max_freq;
+
+ ret = ti_sci_do_xfer(info, xfer);
+ if (ret) {
+ dev_err(dev, "Mbox send fail %d\n", ret);
+ goto fail;
+ }
+
+ resp = (struct ti_sci_msg_resp_query_clock_freq *)xfer->xfer_buf;
+
+ if (!ti_sci_is_response_ack(resp))
+ ret = -ENODEV;
+ else
+ *match_freq = resp->freq_hz;
+
+fail:
+ ti_sci_put_one_xfer(&info->minfo, xfer);
+
+ return ret;
+}
+
+/**
+ * ti_sci_cmd_clk_set_freq() - Set a frequency for clock
+ * @handle: pointer to TI SCI handle
+ * @dev_id: Device identifier this request is for
+ * @clk_id: Clock identifier for the device for this request.
+ * Each device has it's own set of clock inputs. This indexes
+ * which clock input to modify.
+ * @min_freq: The minimum allowable frequency in Hz. This is the minimum
+ * allowable programmed frequency and does not account for clock
+ * tolerances and jitter.
+ * @target_freq: The target clock frequency in Hz. A frequency will be
+ * processed as close to this target frequency as possible.
+ * @max_freq: The maximum allowable frequency in Hz. This is the maximum
+ * allowable programmed frequency and does not account for clock
+ * tolerances and jitter.
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_clk_set_freq(const struct ti_sci_handle *handle,
+ u32 dev_id, u8 clk_id, u64 min_freq,
+ u64 target_freq, u64 max_freq)
+{
+ struct ti_sci_info *info;
+ struct ti_sci_msg_req_set_clock_freq *req;
+ struct ti_sci_msg_hdr *resp;
+ struct ti_sci_xfer *xfer;
+ struct device *dev;
+ int ret = 0;
+
+ if (IS_ERR(handle))
+ return PTR_ERR(handle);
+ if (!handle)
+ return -EINVAL;
+
+ info = handle_to_ti_sci_info(handle);
+ dev = info->dev;
+
+ xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_CLOCK_FREQ,
+ TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+ sizeof(*req), sizeof(*resp));
+ if (IS_ERR(xfer)) {
+ ret = PTR_ERR(xfer);
+ dev_err(dev, "Message alloc failed(%d)\n", ret);
+ return ret;
+ }
+ req = (struct ti_sci_msg_req_set_clock_freq *)xfer->xfer_buf;
+ req->dev_id = dev_id;
+ req->clk_id = clk_id;
+ req->min_freq_hz = min_freq;
+ req->target_freq_hz = target_freq;
+ req->max_freq_hz = max_freq;
+
+ ret = ti_sci_do_xfer(info, xfer);
+ if (ret) {
+ dev_err(dev, "Mbox send fail %d\n", ret);
+ goto fail;
+ }
+
+ resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
+
+ ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV;
+
+fail:
+ ti_sci_put_one_xfer(&info->minfo, xfer);
+
+ return ret;
+}
+
+/**
+ * ti_sci_cmd_clk_get_freq() - Get current frequency
+ * @handle: pointer to TI SCI handle
+ * @dev_id: Device identifier this request is for
+ * @clk_id: Clock identifier for the device for this request.
+ * Each device has it's own set of clock inputs. This indexes
+ * which clock input to modify.
+ * @freq: Currently frequency in Hz
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_clk_get_freq(const struct ti_sci_handle *handle,
+ u32 dev_id, u8 clk_id, u64 *freq)
+{
+ struct ti_sci_info *info;
+ struct ti_sci_msg_req_get_clock_freq *req;
+ struct ti_sci_msg_resp_get_clock_freq *resp;
+ struct ti_sci_xfer *xfer;
+ struct device *dev;
+ int ret = 0;
+
+ if (IS_ERR(handle))
+ return PTR_ERR(handle);
+ if (!handle || !freq)
+ return -EINVAL;
+
+ info = handle_to_ti_sci_info(handle);
+ dev = info->dev;
+
+ xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_CLOCK_FREQ,
+ TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+ sizeof(*req), sizeof(*resp));
+ if (IS_ERR(xfer)) {
+ ret = PTR_ERR(xfer);
+ dev_err(dev, "Message alloc failed(%d)\n", ret);
+ return ret;
+ }
+ req = (struct ti_sci_msg_req_get_clock_freq *)xfer->xfer_buf;
+ req->dev_id = dev_id;
+ req->clk_id = clk_id;
+
+ ret = ti_sci_do_xfer(info, xfer);
+ if (ret) {
+ dev_err(dev, "Mbox send fail %d\n", ret);
+ goto fail;
+ }
+
+ resp = (struct ti_sci_msg_resp_get_clock_freq *)xfer->xfer_buf;
+
+ if (!ti_sci_is_response_ack(resp))
+ ret = -ENODEV;
+ else
+ *freq = resp->freq_hz;
+
+fail:
+ ti_sci_put_one_xfer(&info->minfo, xfer);
+
+ return ret;
+}
+
/*
* ti_sci_setup_ops() - Setup the operations structures
* @info: pointer to TISCI pointer
@@ -910,6 +1579,7 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
{
struct ti_sci_ops *ops = &info->handle.ops;
struct ti_sci_dev_ops *dops = &ops->dev_ops;
+ struct ti_sci_clk_ops *cops = &ops->clk_ops;
dops->get_device = ti_sci_cmd_get_device;
dops->idle_device = ti_sci_cmd_idle_device;
@@ -923,6 +1593,21 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
dops->is_transitioning = ti_sci_cmd_dev_is_trans;
dops->set_device_resets = ti_sci_cmd_set_device_resets;
dops->get_device_resets = ti_sci_cmd_get_device_resets;
+
+ cops->get_clock = ti_sci_cmd_get_clock;
+ cops->idle_clock = ti_sci_cmd_idle_clock;
+ cops->put_clock = ti_sci_cmd_put_clock;
+ cops->is_auto = ti_sci_cmd_clk_is_auto;
+ cops->is_on = ti_sci_cmd_clk_is_on;
+ cops->is_off = ti_sci_cmd_clk_is_off;
+
+ cops->set_parent = ti_sci_cmd_clk_set_parent;
+ cops->get_parent = ti_sci_cmd_clk_get_parent;
+ cops->get_num_parents = ti_sci_cmd_clk_get_num_parents;
+
+ cops->get_best_match_freq = ti_sci_cmd_clk_get_match_freq;
+ cops->set_freq = ti_sci_cmd_clk_set_freq;
+ cops->get_freq = ti_sci_cmd_clk_get_freq;
}
/**
diff --git a/drivers/firmware/ti_sci.h b/drivers/firmware/ti_sci.h
index 29ce0532a7ca..f69907cfc128 100644
--- a/drivers/firmware/ti_sci.h
+++ b/drivers/firmware/ti_sci.h
@@ -52,6 +52,16 @@
#define TI_SCI_MSG_GET_DEVICE_STATE 0x0201
#define TI_SCI_MSG_SET_DEVICE_RESETS 0x0202
+/* Clock requests */
+#define TI_SCI_MSG_SET_CLOCK_STATE 0x0100
+#define TI_SCI_MSG_GET_CLOCK_STATE 0x0101
+#define TI_SCI_MSG_SET_CLOCK_PARENT 0x0102
+#define TI_SCI_MSG_GET_CLOCK_PARENT 0x0103
+#define TI_SCI_MSG_GET_NUM_CLOCK_PARENTS 0x0104
+#define TI_SCI_MSG_SET_CLOCK_FREQ 0x010c
+#define TI_SCI_MSG_QUERY_CLOCK_FREQ 0x010d
+#define TI_SCI_MSG_GET_CLOCK_FREQ 0x010e
+
/**
* struct ti_sci_msg_hdr - Generic Message Header for All messages and responses
* @type: Type of messages: One of TI_SCI_MSG* values
@@ -188,4 +198,283 @@ struct ti_sci_msg_req_set_device_resets {
u32 resets;
} __packed;
+/**
+ * struct ti_sci_msg_req_set_clock_state - Request to setup a Clock state
+ * @hdr: Generic Header, Certain flags can be set specific to the clocks:
+ * MSG_FLAG_CLOCK_ALLOW_SSC: Allow this clock to be modified
+ * via spread spectrum clocking.
+ * MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE: Allow this clock's
+ * frequency to be changed while it is running so long as it
+ * is within the min/max limits.
+ * MSG_FLAG_CLOCK_INPUT_TERM: Enable input termination, this
+ * is only applicable to clock inputs on the SoC pseudo-device.
+ * @dev_id: Device identifier this request is for
+ * @clk_id: Clock identifier for the device for this request.
+ * Each device has it's own set of clock inputs. This indexes
+ * which clock input to modify.
+ * @request_state: Request the state for the clock to be set to.
+ * MSG_CLOCK_SW_STATE_UNREQ: The IP does not require this clock,
+ * it can be disabled, regardless of the state of the device
+ * MSG_CLOCK_SW_STATE_AUTO: Allow the System Controller to
+ * automatically manage the state of this clock. If the device
+ * is enabled, then the clock is enabled. If the device is set
+ * to off or retention, then the clock is internally set as not
+ * being required by the device.(default)
+ * MSG_CLOCK_SW_STATE_REQ: Configure the clock to be enabled,
+ * regardless of the state of the device.
+ *
+ * Normally, all required clocks are managed by TISCI entity, this is used
+ * only for specific control *IF* required. Auto managed state is
+ * MSG_CLOCK_SW_STATE_AUTO, in other states, TISCI entity assume remote
+ * will explicitly control.
+ *
+ * Request type is TI_SCI_MSG_SET_CLOCK_STATE, response is a generic
+ * ACK or NACK message.
+ */
+struct ti_sci_msg_req_set_clock_state {
+ /* Additional hdr->flags options */
+#define MSG_FLAG_CLOCK_ALLOW_SSC TI_SCI_MSG_FLAG(8)
+#define MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE TI_SCI_MSG_FLAG(9)
+#define MSG_FLAG_CLOCK_INPUT_TERM TI_SCI_MSG_FLAG(10)
+ struct ti_sci_msg_hdr hdr;
+ u32 dev_id;
+ u8 clk_id;
+#define MSG_CLOCK_SW_STATE_UNREQ 0
+#define MSG_CLOCK_SW_STATE_AUTO 1
+#define MSG_CLOCK_SW_STATE_REQ 2
+ u8 request_state;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_clock_state - Request for clock state
+ * @hdr: Generic Header
+ * @dev_id: Device identifier this request is for
+ * @clk_id: Clock identifier for the device for this request.
+ * Each device has it's own set of clock inputs. This indexes
+ * which clock input to get state of.
+ *
+ * Request type is TI_SCI_MSG_GET_CLOCK_STATE, response is state
+ * of the clock
+ */
+struct ti_sci_msg_req_get_clock_state {
+ struct ti_sci_msg_hdr hdr;
+ u32 dev_id;
+ u8 clk_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_clock_state - Response to get clock state
+ * @hdr: Generic Header
+ * @programmed_state: Any programmed state of the clock. This is one of
+ * MSG_CLOCK_SW_STATE* values.
+ * @current_state: Current state of the clock. This is one of:
+ * MSG_CLOCK_HW_STATE_NOT_READY: Clock is not ready
+ * MSG_CLOCK_HW_STATE_READY: Clock is ready
+ *
+ * Response to TI_SCI_MSG_GET_CLOCK_STATE.
+ */
+struct ti_sci_msg_resp_get_clock_state {
+ struct ti_sci_msg_hdr hdr;
+ u8 programmed_state;
+#define MSG_CLOCK_HW_STATE_NOT_READY 0
+#define MSG_CLOCK_HW_STATE_READY 1
+ u8 current_state;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_set_clock_parent - Set the clock parent
+ * @hdr: Generic Header
+ * @dev_id: Device identifier this request is for
+ * @clk_id: Clock identifier for the device for this request.
+ * Each device has it's own set of clock inputs. This indexes
+ * which clock input to modify.
+ * @parent_id: The new clock parent is selectable by an index via this
+ * parameter.
+ *
+ * Request type is TI_SCI_MSG_SET_CLOCK_PARENT, response is generic
+ * ACK / NACK message.
+ */
+struct ti_sci_msg_req_set_clock_parent {
+ struct ti_sci_msg_hdr hdr;
+ u32 dev_id;
+ u8 clk_id;
+ u8 parent_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_clock_parent - Get the clock parent
+ * @hdr: Generic Header
+ * @dev_id: Device identifier this request is for
+ * @clk_id: Clock identifier for the device for this request.
+ * Each device has it's own set of clock inputs. This indexes
+ * which clock input to get the parent for.
+ *
+ * Request type is TI_SCI_MSG_GET_CLOCK_PARENT, response is parent information
+ */
+struct ti_sci_msg_req_get_clock_parent {
+ struct ti_sci_msg_hdr hdr;
+ u32 dev_id;
+ u8 clk_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_clock_parent - Response with clock parent
+ * @hdr: Generic Header
+ * @parent_id: The current clock parent
+ *
+ * Response to TI_SCI_MSG_GET_CLOCK_PARENT.
+ */
+struct ti_sci_msg_resp_get_clock_parent {
+ struct ti_sci_msg_hdr hdr;
+ u8 parent_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_clock_num_parents - Request to get clock parents
+ * @hdr: Generic header
+ * @dev_id: Device identifier this request is for
+ * @clk_id: Clock identifier for the device for this request.
+ *
+ * This request provides information about how many clock parent options
+ * are available for a given clock to a device. This is typically used
+ * for input clocks.
+ *
+ * Request type is TI_SCI_MSG_GET_NUM_CLOCK_PARENTS, response is appropriate
+ * message, or NACK in case of inability to satisfy request.
+ */
+struct ti_sci_msg_req_get_clock_num_parents {
+ struct ti_sci_msg_hdr hdr;
+ u32 dev_id;
+ u8 clk_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_clock_num_parents - Response for get clk parents
+ * @hdr: Generic header
+ * @num_parents: Number of clock parents
+ *
+ * Response to TI_SCI_MSG_GET_NUM_CLOCK_PARENTS
+ */
+struct ti_sci_msg_resp_get_clock_num_parents {
+ struct ti_sci_msg_hdr hdr;
+ u8 num_parents;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_query_clock_freq - Request to query a frequency
+ * @hdr: Generic Header
+ * @dev_id: Device identifier this request is for
+ * @min_freq_hz: The minimum allowable frequency in Hz. This is the minimum
+ * allowable programmed frequency and does not account for clock
+ * tolerances and jitter.
+ * @target_freq_hz: The target clock frequency. A frequency will be found
+ * as close to this target frequency as possible.
+ * @max_freq_hz: The maximum allowable frequency in Hz. This is the maximum
+ * allowable programmed frequency and does not account for clock
+ * tolerances and jitter.
+ * @clk_id: Clock identifier for the device for this request.
+ *
+ * NOTE: Normally clock frequency management is automatically done by TISCI
+ * entity. In case of specific requests, TISCI evaluates capability to achieve
+ * requested frequency within provided range and responds with
+ * result message.
+ *
+ * Request type is TI_SCI_MSG_QUERY_CLOCK_FREQ, response is appropriate message,
+ * or NACK in case of inability to satisfy request.
+ */
+struct ti_sci_msg_req_query_clock_freq {
+ struct ti_sci_msg_hdr hdr;
+ u32 dev_id;
+ u64 min_freq_hz;
+ u64 target_freq_hz;
+ u64 max_freq_hz;
+ u8 clk_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_query_clock_freq - Response to a clock frequency query
+ * @hdr: Generic Header
+ * @freq_hz: Frequency that is the best match in Hz.
+ *
+ * Response to request type TI_SCI_MSG_QUERY_CLOCK_FREQ. NOTE: if the request
+ * cannot be satisfied, the message will be of type NACK.
+ */
+struct ti_sci_msg_resp_query_clock_freq {
+ struct ti_sci_msg_hdr hdr;
+ u64 freq_hz;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_set_clock_freq - Request to setup a clock frequency
+ * @hdr: Generic Header
+ * @dev_id: Device identifier this request is for
+ * @min_freq_hz: The minimum allowable frequency in Hz. This is the minimum
+ * allowable programmed frequency and does not account for clock
+ * tolerances and jitter.
+ * @target_freq_hz: The target clock frequency. The clock will be programmed
+ * at a rate as close to this target frequency as possible.
+ * @max_freq_hz: The maximum allowable frequency in Hz. This is the maximum
+ * allowable programmed frequency and does not account for clock
+ * tolerances and jitter.
+ * @clk_id: Clock identifier for the device for this request.
+ *
+ * NOTE: Normally clock frequency management is automatically done by TISCI
+ * entity. In case of specific requests, TISCI evaluates capability to achieve
+ * requested range and responds with success/failure message.
+ *
+ * This sets the desired frequency for a clock within an allowable
+ * range. This message will fail on an enabled clock unless
+ * MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE is set for the clock. Additionally,
+ * if other clocks have their frequency modified due to this message,
+ * they also must have the MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE or be disabled.
+ *
+ * Calling set frequency on a clock input to the SoC pseudo-device will
+ * inform the PMMC of that clock's frequency. Setting a frequency of
+ * zero will indicate the clock is disabled.
+ *
+ * Calling set frequency on clock outputs from the SoC pseudo-device will
+ * function similarly to setting the clock frequency on a device.
+ *
+ * Request type is TI_SCI_MSG_SET_CLOCK_FREQ, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_set_clock_freq {
+ struct ti_sci_msg_hdr hdr;
+ u32 dev_id;
+ u64 min_freq_hz;
+ u64 target_freq_hz;
+ u64 max_freq_hz;
+ u8 clk_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_clock_freq - Request to get the clock frequency
+ * @hdr: Generic Header
+ * @dev_id: Device identifier this request is for
+ * @clk_id: Clock identifier for the device for this request.
+ *
+ * NOTE: Normally clock frequency management is automatically done by TISCI
+ * entity. In some cases, clock frequencies are configured by host.
+ *
+ * Request type is TI_SCI_MSG_GET_CLOCK_FREQ, responded with clock frequency
+ * that the clock is currently at.
+ */
+struct ti_sci_msg_req_get_clock_freq {
+ struct ti_sci_msg_hdr hdr;
+ u32 dev_id;
+ u8 clk_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_clock_freq - Response of clock frequency request
+ * @hdr: Generic Header
+ * @freq_hz: Frequency that the clock is currently on, in Hz.
+ *
+ * Response to request type TI_SCI_MSG_GET_CLOCK_FREQ.
+ */
+struct ti_sci_msg_resp_get_clock_freq {
+ struct ti_sci_msg_hdr hdr;
+ u64 freq_hz;
+} __packed;
+
#endif /* __TI_SCI_H */
diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h
index 87fa73851471..76378fddf609 100644
--- a/include/linux/soc/ti/ti_sci_protocol.h
+++ b/include/linux/soc/ti/ti_sci_protocol.h
@@ -115,11 +115,89 @@ struct ti_sci_dev_ops {
};
/**
+ * struct ti_sci_clk_ops - Clock control operations
+ * @get_clock: Request for activation of clock and manage by processor
+ * - needs_ssc: 'true' if Spread Spectrum clock is desired.
+ * - can_change_freq: 'true' if frequency change is desired.
+ * - enable_input_term: 'true' if input termination is desired.
+ * @idle_clock: Request for Idling a clock managed by processor
+ * @put_clock: Release the clock to be auto managed by TISCI
+ * @is_auto: Is the clock being auto managed
+ * - req_state: state indicating if the clock is auto managed
+ * @is_on: Is the clock ON
+ * - req_state: if the clock is requested to be forced ON
+ * - current_state: if the clock is currently ON
+ * @is_off: Is the clock OFF
+ * - req_state: if the clock is requested to be forced OFF
+ * - current_state: if the clock is currently Gated
+ * @set_parent: Set the clock source of a specific device clock
+ * - parent_id: Parent clock identifier to set.
+ * @get_parent: Get the current clock source of a specific device clock
+ * - parent_id: Parent clock identifier which is the parent.
+ * @get_num_parents: Get the number of parents of the current clock source
+ * - num_parents: returns the number of parent clocks.
+ * @get_best_match_freq: Find a best matching frequency for a frequency
+ * range.
+ * - match_freq: Best matching frequency in Hz.
+ * @set_freq: Set the Clock frequency
+ * @get_freq: Get the Clock frequency
+ * - current_freq: Frequency in Hz that the clock is at.
+ *
+ * NOTE: for all these functions, the following parameters are generic in
+ * nature:
+ * -handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle
+ * -did: Device identifier this request is for
+ * -cid: Clock identifier for the device for this request.
+ * Each device has it's own set of clock inputs. This indexes
+ * which clock input to modify.
+ * -min_freq: The minimum allowable frequency in Hz. This is the minimum
+ * allowable programmed frequency and does not account for clock
+ * tolerances and jitter.
+ * -target_freq: The target clock frequency in Hz. A frequency will be
+ * processed as close to this target frequency as possible.
+ * -max_freq: The maximum allowable frequency in Hz. This is the maximum
+ * allowable programmed frequency and does not account for clock
+ * tolerances and jitter.
+ *
+ * Request for the clock - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_clock with put_clock. No refcounting is
+ * managed by driver for that purpose.
+ */
+struct ti_sci_clk_ops {
+ int (*get_clock)(const struct ti_sci_handle *handle, u32 did, u8 cid,
+ bool needs_ssc, bool can_change_freq,
+ bool enable_input_term);
+ int (*idle_clock)(const struct ti_sci_handle *handle, u32 did, u8 cid);
+ int (*put_clock)(const struct ti_sci_handle *handle, u32 did, u8 cid);
+ int (*is_auto)(const struct ti_sci_handle *handle, u32 did, u8 cid,
+ bool *req_state);
+ int (*is_on)(const struct ti_sci_handle *handle, u32 did, u8 cid,
+ bool *req_state, bool *current_state);
+ int (*is_off)(const struct ti_sci_handle *handle, u32 did, u8 cid,
+ bool *req_state, bool *current_state);
+ int (*set_parent)(const struct ti_sci_handle *handle, u32 did, u8 cid,
+ u8 parent_id);
+ int (*get_parent)(const struct ti_sci_handle *handle, u32 did, u8 cid,
+ u8 *parent_id);
+ int (*get_num_parents)(const struct ti_sci_handle *handle, u32 did,
+ u8 cid, u8 *num_parents);
+ int (*get_best_match_freq)(const struct ti_sci_handle *handle, u32 did,
+ u8 cid, u64 min_freq, u64 target_freq,
+ u64 max_freq, u64 *match_freq);
+ int (*set_freq)(const struct ti_sci_handle *handle, u32 did, u8 cid,
+ u64 min_freq, u64 target_freq, u64 max_freq);
+ int (*get_freq)(const struct ti_sci_handle *handle, u32 did, u8 cid,
+ u64 *current_freq);
+};
+
+/**
* struct ti_sci_ops - Function support for TI SCI
* @dev_ops: Device specific operations
+ * @clk_ops: Clock specific operations
*/
struct ti_sci_ops {
struct ti_sci_dev_ops dev_ops;
+ struct ti_sci_clk_ops clk_ops;
};
/**
--
2.10.0
More information about the linux-arm-kernel
mailing list