[PATCH V4 2/5] firmware: Add basic support for TI System Control Interface (TI-SCI) protocol
Nishanth Menon
nm at ti.com
Tue Oct 18 16:08:34 PDT 2016
Texas Instrument's System Control Interface (TI-SCI) Message Protocol
is used in Texas Instrument's System on Chip (SoC) such as those
in keystone family K2G SoC to communicate between various compute
processors with a central system controller entity.
TI-SCI message protocol provides support for management of various
hardware entities within the SoC. Add support driver to allow
communication with system controller entity within the SoC using the
mailbox client.
We introduce the basic registration and query capability for the
driver protocol as part of this change. Subsequent patches add in
functionality specific to the TI-SCI features.
Signed-off-by: Nishanth Menon <nm at ti.com>
---
Changes since v3:
- checkpatch fixes for macro after checkpatch.pl update in v4.9-rc1
V3: https://patchwork.kernel.org/patch/9317839/
MAINTAINERS | 2 +
drivers/firmware/Kconfig | 15 +
drivers/firmware/Makefile | 1 +
drivers/firmware/ti_sci.c | 790 +++++++++++++++++++++++++++++++++
drivers/firmware/ti_sci.h | 93 ++++
include/linux/soc/ti/ti_sci_protocol.h | 69 +++
6 files changed, 970 insertions(+)
create mode 100644 drivers/firmware/ti_sci.c
create mode 100644 drivers/firmware/ti_sci.h
create mode 100644 include/linux/soc/ti/ti_sci_protocol.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 2bafadf5747a..467b29fafaca 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11890,6 +11890,8 @@ M: Santosh Shilimkar <ssantosh at kernel.org>
L: linux-arm-kernel at lists.infradead.org
S: Maintained
F: Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
+F: drivers/firmware/ti_sci*
+F: include/linux/soc/ti/ti_sci_protocol.h
THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
M: Hans Verkuil <hverkuil at xs4all.nl>
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index bca172d42c74..9418d7d1b0a5 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -203,6 +203,21 @@ config QCOM_SCM_64
def_bool y
depends on QCOM_SCM && ARM64
+config TI_SCI_PROTOCOL
+ tristate "TI System Control Interface (TISCI) Message Protocol"
+ depends on TI_MESSAGE_MANAGER
+ help
+ TI System Control Interface (TISCI) Message Protocol is used to manage
+ compute systems such as ARM, DSP etc with the system controller in
+ complex System on Chip(SoC) such as those found on certain keystone
+ generation SoC from TI.
+
+ System controller provides various facilities including power
+ management function support.
+
+ This protocol library is used by client drivers to use the features
+ provided by the system controller.
+
config HAVE_ARM_SMCCC
bool
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 898ac41fa8b3..dcb52c423151 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_QCOM_SCM) += qcom_scm.o
obj-$(CONFIG_QCOM_SCM_64) += qcom_scm-64.o
obj-$(CONFIG_QCOM_SCM_32) += qcom_scm-32.o
CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch armv7-a\n.arch_extension sec,-DREQUIRES_SEC=1) -march=armv7-a
+obj-$(CONFIG_TI_SCI_PROTOCOL) += ti_sci.o
obj-y += broadcom/
obj-y += meson/
diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
new file mode 100644
index 000000000000..5e99d7c18276
--- /dev/null
+++ b/drivers/firmware/ti_sci.c
@@ -0,0 +1,790 @@
+/*
+ * Texas Instruments System Control Interface Protocol Driver
+ *
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Nishanth Menon
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/bitmap.h>
+#include <linux/debugfs.h>
+#include <linux/export.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mailbox_client.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/semaphore.h>
+#include <linux/slab.h>
+#include <linux/soc/ti/ti-msgmgr.h>
+#include <linux/soc/ti/ti_sci_protocol.h>
+
+#include "ti_sci.h"
+
+/* List of all TI SCI devices active in system */
+static LIST_HEAD(ti_sci_list);
+/* Protection for the entire list */
+static DEFINE_MUTEX(ti_sci_list_mutex);
+
+/**
+ * struct ti_sci_xfer - Structure representing a message flow
+ * @tx_message: Transmit message
+ * @rx_len: Receive message length
+ * @xfer_buf: Preallocated buffer to store receive message
+ * Since we work with request-ACK protocol, we can
+ * reuse the same buffer for the rx path as we
+ * use for the tx path.
+ * @done: completion event
+ */
+struct ti_sci_xfer {
+ struct ti_msgmgr_message tx_message;
+ u8 rx_len;
+ u8 *xfer_buf;
+ struct completion done;
+};
+
+/**
+ * struct ti_sci_xfers_info - Structure to manage transfer information
+ * @sem_xfer_count: Counting Semaphore for managing max simultaneous
+ * Messages.
+ * @xfer_block: Preallocated Message array
+ * @xfer_alloc_table: Bitmap table for allocated messages.
+ * Index of this bitmap table is also used for message
+ * sequence identifier.
+ * @xfer_lock: Protection for message allocation
+ */
+struct ti_sci_xfers_info {
+ struct semaphore sem_xfer_count;
+ struct ti_sci_xfer *xfer_block;
+ unsigned long *xfer_alloc_table;
+ /* protect transfer allocation */
+ spinlock_t xfer_lock;
+};
+
+/**
+ * struct ti_sci_desc - Description of SoC integration
+ * @host_id: Host identifier representing the compute entity
+ * @max_rx_timeout_ms: Timeout for communication with SoC (in Milliseconds)
+ * @max_msgs: Maximum number of messages that can be pending
+ * simultaneously in the system
+ * @max_msg_size: Maximum size of data per message that can be handled.
+ */
+struct ti_sci_desc {
+ u8 host_id;
+ int max_rx_timeout_ms;
+ int max_msgs;
+ int max_msg_size;
+};
+
+/**
+ * struct ti_sci_info - Structure representing a TI SCI instance
+ * @dev: Device pointer
+ * @desc: SoC description for this instance
+ * @d: Debugfs file entry
+ * @debug_region: Memory region where the debug message are available
+ * @debug_region_size: Debug region size
+ * @debug_buffer: Buffer allocated to copy debug messages.
+ * @handle: Instance of TI SCI handle to send to clients.
+ * @cl: Mailbox Client
+ * @chan_tx: Transmit mailbox channel
+ * @chan_rx: Receive mailbox channel
+ * @minfo: Message info
+ * @node: list head
+ * @users: Number of users of this instance
+ */
+struct ti_sci_info {
+ struct device *dev;
+ const struct ti_sci_desc *desc;
+ struct dentry *d;
+ void __iomem *debug_region;
+ char *debug_buffer;
+ size_t debug_region_size;
+ struct ti_sci_handle handle;
+ struct mbox_client cl;
+ struct mbox_chan *chan_tx;
+ struct mbox_chan *chan_rx;
+ struct ti_sci_xfers_info minfo;
+ struct list_head node;
+ /* protected by ti_sci_list_mutex */
+ int users;
+};
+
+#define cl_to_ti_sci_info(c) container_of(c, struct ti_sci_info, cl)
+#define handle_to_ti_sci_info(h) container_of(h, struct ti_sci_info, handle)
+
+#ifdef CONFIG_DEBUG_FS
+
+/**
+ * ti_sci_debug_show() - Helper to dump the debug log
+ * @s: sequence file pointer
+ * @unused: unused.
+ *
+ * Return: 0
+ */
+static int ti_sci_debug_show(struct seq_file *s, void *unused)
+{
+ struct ti_sci_info *info = s->private;
+
+ memcpy_fromio(info->debug_buffer, info->debug_region,
+ info->debug_region_size);
+ /*
+ * We don't trust firmware to leave NULL terminated last byte (hence
+ * we have allocated 1 extra 0 byte). Since we cannot guarantee any
+ * specific data format for debug messages, We just present the data
+ * in the buffer as is - we expect the messages to be self explanatory.
+ */
+ seq_puts(s, info->debug_buffer);
+ return 0;
+}
+
+/**
+ * ti_sci_debug_open() - debug file open
+ * @inode: inode pointer
+ * @file: file pointer
+ *
+ * Return: result of single_open
+ */
+static int ti_sci_debug_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ti_sci_debug_show, inode->i_private);
+}
+
+/* log file operations */
+static const struct file_operations ti_sci_debug_fops = {
+ .open = ti_sci_debug_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+/**
+ * ti_sci_debugfs_create() - Create log debug file
+ * @pdev: platform device pointer
+ * @info: Pointer to SCI entity information
+ *
+ * Return: 0 if all went fine, else corresponding error.
+ */
+static int ti_sci_debugfs_create(struct platform_device *pdev,
+ struct ti_sci_info *info)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ char debug_name[50] = "ti_sci_debug@";
+
+ /* Debug region is optional */
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "debug_messages");
+ info->debug_region = devm_ioremap_resource(dev, res);
+ if (IS_ERR(info->debug_region))
+ return 0;
+ info->debug_region_size = resource_size(res);
+
+ info->debug_buffer = devm_kcalloc(dev, info->debug_region_size + 1,
+ sizeof(char), GFP_KERNEL);
+ if (!info->debug_buffer)
+ return -ENOMEM;
+ /* Setup NULL termination */
+ info->debug_buffer[info->debug_region_size] = 0;
+
+ info->d = debugfs_create_file(strncat(debug_name, dev_name(dev),
+ sizeof(debug_name)),
+ 0444, NULL, info, &ti_sci_debug_fops);
+ if (IS_ERR(info->d))
+ return PTR_ERR(info->d);
+
+ dev_dbg(dev, "Debug region => %p, size = %zu bytes, resource: %pr\n",
+ info->debug_region, info->debug_region_size, res);
+ return 0;
+}
+
+/**
+ * ti_sci_debugfs_destroy() - clean up log debug file
+ * @pdev: platform device pointer
+ * @info: Pointer to SCI entity information
+ */
+static void ti_sci_debugfs_destroy(struct platform_device *pdev,
+ struct ti_sci_info *info)
+{
+ if (IS_ERR(info->debug_region))
+ return;
+
+ debugfs_remove(info->d);
+}
+#else /* CONFIG_DEBUG_FS */
+static inline int ti_sci_debugfs_create(struct platform_device *dev,
+ struct ti_sci_info *info)
+{
+ return 0;
+}
+
+static inline void ti_sci_debugfs_destroy(struct platform_device *dev,
+ struct ti_sci_info *info)
+{
+}
+#endif /* CONFIG_DEBUG_FS */
+
+/**
+ * ti_sci_dump_header_dbg() - Helper to dump a message header.
+ * @dev: Device pointer corresponding to the SCI entity
+ * @hdr: pointer to header.
+ */
+static inline void ti_sci_dump_header_dbg(struct device *dev,
+ struct ti_sci_msg_hdr *hdr)
+{
+ dev_dbg(dev, "MSGHDR:type=0x%04x host=0x%02x seq=0x%02x flags=0x%08x\n",
+ hdr->type, hdr->host, hdr->seq, hdr->flags);
+}
+
+/**
+ * ti_sci_rx_callback() - mailbox client callback for receive messages
+ * @cl: client pointer
+ * @m: mailbox message
+ *
+ * Processes one received message to appropriate transfer information and
+ * signals completion of the transfer.
+ *
+ * NOTE: This function will be invoked in IRQ context, hence should be
+ * as optimal as possible.
+ */
+static void ti_sci_rx_callback(struct mbox_client *cl, void *m)
+{
+ struct ti_sci_info *info = cl_to_ti_sci_info(cl);
+ struct device *dev = info->dev;
+ struct ti_sci_xfers_info *minfo = &info->minfo;
+ struct ti_msgmgr_message *mbox_msg = m;
+ struct ti_sci_msg_hdr *hdr = (struct ti_sci_msg_hdr *)mbox_msg->buf;
+ struct ti_sci_xfer *xfer;
+ u8 xfer_id;
+
+ xfer_id = hdr->seq;
+
+ /*
+ * Are we even expecting this?
+ * NOTE: barriers were implicit in locks used for modifying the bitmap
+ */
+ if (!test_bit(xfer_id, minfo->xfer_alloc_table)) {
+ dev_err(dev, "Message for %d is not expected!\n", xfer_id);
+ return;
+ }
+
+ xfer = &minfo->xfer_block[xfer_id];
+
+ /* Is the message of valid length? */
+ if (mbox_msg->len > info->desc->max_msg_size) {
+ dev_err(dev, "Unable to handle %d xfer(max %d)\n",
+ mbox_msg->len, info->desc->max_msg_size);
+ ti_sci_dump_header_dbg(dev, hdr);
+ return;
+ }
+ if (mbox_msg->len < xfer->rx_len) {
+ dev_err(dev, "Recv xfer %d < expected %d length\n",
+ mbox_msg->len, xfer->rx_len);
+ ti_sci_dump_header_dbg(dev, hdr);
+ return;
+ }
+
+ ti_sci_dump_header_dbg(dev, hdr);
+ /* Take a copy to the rx buffer.. */
+ memcpy(xfer->xfer_buf, mbox_msg->buf, xfer->rx_len);
+ complete(&xfer->done);
+}
+
+/**
+ * ti_sci_get_one_xfer() - Allocate one message
+ * @info: Pointer to SCI entity information
+ * @msg_type: Message type
+ * @msg_flags: Flag to set for the message
+ * @tx_message_size: transmit message size
+ * @rx_message_size: receive message size
+ *
+ * Helper function which is used by various command functions that are
+ * exposed to clients of this driver for allocating a message traffic event.
+ *
+ * This function can sleep depending on pending requests already in the system
+ * for the SCI entity. Further, this also holds a spinlock to maintain integrity
+ * of internal data structures.
+ *
+ * Return: 0 if all went fine, else corresponding error.
+ */
+static struct ti_sci_xfer *ti_sci_get_one_xfer(struct ti_sci_info *info,
+ u16 msg_type, u32 msg_flags,
+ size_t tx_message_size,
+ size_t rx_message_size)
+{
+ struct ti_sci_xfers_info *minfo = &info->minfo;
+ struct ti_sci_xfer *xfer;
+ struct ti_sci_msg_hdr *hdr;
+ unsigned long flags;
+ unsigned long bit_pos;
+ u8 xfer_id;
+ int ret;
+ int timeout;
+
+ /* Ensure we have sane transfer sizes */
+ if (rx_message_size > info->desc->max_msg_size ||
+ tx_message_size > info->desc->max_msg_size ||
+ rx_message_size < sizeof(*hdr) || tx_message_size < sizeof(*hdr))
+ return ERR_PTR(-ERANGE);
+
+ /*
+ * Ensure we have only controlled number of pending messages.
+ * Ideally, we might just have to wait a single message, be
+ * conservative and wait 5 times that..
+ */
+ timeout = msecs_to_jiffies(info->desc->max_rx_timeout_ms) * 5;
+ ret = down_timeout(&minfo->sem_xfer_count, timeout);
+ if (ret < 0)
+ return ERR_PTR(ret);
+
+ /* Keep the locked section as small as possible */
+ spin_lock_irqsave(&minfo->xfer_lock, flags);
+ bit_pos = find_first_zero_bit(minfo->xfer_alloc_table,
+ info->desc->max_msgs);
+ set_bit(bit_pos, minfo->xfer_alloc_table);
+ spin_unlock_irqrestore(&minfo->xfer_lock, flags);
+
+ /*
+ * We already ensured in probe that we can have max messages that can
+ * fit in hdr.seq - NOTE: this improves access latencies
+ * to predictable O(1) access, BUT, it opens us to risk if
+ * remote misbehaves with corrupted message sequence responses.
+ * If that happens, we are going to be messed up anyways..
+ */
+ xfer_id = (u8)bit_pos;
+
+ xfer = &minfo->xfer_block[xfer_id];
+
+ hdr = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
+ xfer->tx_message.len = tx_message_size;
+ xfer->rx_len = (u8)rx_message_size;
+
+ reinit_completion(&xfer->done);
+
+ hdr->seq = xfer_id;
+ hdr->type = msg_type;
+ hdr->host = info->desc->host_id;
+ hdr->flags = msg_flags;
+
+ return xfer;
+}
+
+/**
+ * ti_sci_put_one_xfer() - Release a message
+ * @minfo: transfer info pointer
+ * @xfer: message that was reserved by ti_sci_get_one_xfer
+ *
+ * This holds a spinlock to maintain integrity of internal data structures.
+ */
+static void ti_sci_put_one_xfer(struct ti_sci_xfers_info *minfo,
+ struct ti_sci_xfer *xfer)
+{
+ unsigned long flags;
+ struct ti_sci_msg_hdr *hdr;
+ u8 xfer_id;
+
+ hdr = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
+ xfer_id = hdr->seq;
+
+ /*
+ * Keep the locked section as small as possible
+ * NOTE: we might escape with smp_mb and no lock here..
+ * but just be conservative and symmetric.
+ */
+ spin_lock_irqsave(&minfo->xfer_lock, flags);
+ clear_bit(xfer_id, minfo->xfer_alloc_table);
+ spin_unlock_irqrestore(&minfo->xfer_lock, flags);
+
+ /* Increment the count for the next user to get through */
+ up(&minfo->sem_xfer_count);
+}
+
+/**
+ * ti_sci_do_xfer() - Do one transfer
+ * @info: Pointer to SCI entity information
+ * @xfer: Transfer to initiate and wait for response
+ *
+ * Return: -ETIMEDOUT in case of no response, if transmit error,
+ * return corresponding error, else if all goes well,
+ * return 0.
+ */
+static inline int ti_sci_do_xfer(struct ti_sci_info *info,
+ struct ti_sci_xfer *xfer)
+{
+ int ret;
+ int timeout;
+ struct device *dev = info->dev;
+
+ ret = mbox_send_message(info->chan_tx, &xfer->tx_message);
+ if (ret < 0)
+ return ret;
+
+ ret = 0;
+
+ /* And we wait for the response. */
+ timeout = msecs_to_jiffies(info->desc->max_rx_timeout_ms);
+ if (!wait_for_completion_timeout(&xfer->done, timeout)) {
+ dev_err(dev, "Mbox timedout in resp(caller: %pF)\n",
+ (void *)_RET_IP_);
+ ret = -ETIMEDOUT;
+ }
+ /*
+ * NOTE: we might prefer not to need the mailbox ticker to manage the
+ * transfer queueing since the protocol layer queues things by itself.
+ * Unfortunately, we have to kick the mailbox framework after we have
+ * received our message.
+ */
+ mbox_client_txdone(info->chan_tx, ret);
+
+ return ret;
+}
+
+/**
+ * ti_sci_cmd_get_revision() - command to get the revision of the SCI entity
+ * @info: Pointer to SCI entity information
+ *
+ * Updates the SCI information in the internal data structure.
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_get_revision(struct ti_sci_info *info)
+{
+ struct device *dev = info->dev;
+ struct ti_sci_handle *handle = &info->handle;
+ struct ti_sci_version_info *ver = &handle->version;
+ struct ti_sci_msg_resp_version *rev_info;
+ struct ti_sci_xfer *xfer;
+ int ret;
+
+ /* No need to setup flags since it is expected to respond */
+ xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_VERSION,
+ 0x0, sizeof(struct ti_sci_msg_hdr),
+ sizeof(*rev_info));
+ if (IS_ERR(xfer)) {
+ ret = PTR_ERR(xfer);
+ dev_err(dev, "Message alloc failed(%d)\n", ret);
+ return ret;
+ }
+
+ rev_info = (struct ti_sci_msg_resp_version *)xfer->xfer_buf;
+
+ ret = ti_sci_do_xfer(info, xfer);
+ if (ret) {
+ dev_err(dev, "Mbox send fail %d\n", ret);
+ goto fail;
+ }
+
+ ver->abi_major = rev_info->abi_major;
+ ver->abi_minor = rev_info->abi_minor;
+ ver->firmware_revision = rev_info->firmware_revision;
+ strncpy(ver->firmware_description, rev_info->firmware_description,
+ sizeof(ver->firmware_description));
+
+fail:
+ ti_sci_put_one_xfer(&info->minfo, xfer);
+ return ret;
+}
+
+/**
+ * ti_sci_get_handle() - Get the TI SCI handle for a device
+ * @dev: Pointer to device for which we want SCI handle
+ *
+ * NOTE: The function does not track individual clients of the framework
+ * and is expected to be maintained by caller of TI SCI protocol library.
+ * ti_sci_put_handle must be balanced with successful ti_sci_get_handle
+ * Return: pointer to handle if successful, else:
+ * -EPROBE_DEFER if the instance is not ready
+ * -ENODEV if the required node handler is missing
+ * -EINVAL if invalid conditions are encountered.
+ */
+const struct ti_sci_handle *ti_sci_get_handle(struct device *dev)
+{
+ struct device_node *ti_sci_np;
+ struct list_head *p;
+ struct ti_sci_handle *handle = NULL;
+ struct ti_sci_info *info;
+
+ if (!dev) {
+ pr_err("I need a device pointer\n");
+ return ERR_PTR(-EINVAL);
+ }
+ ti_sci_np = of_get_parent(dev->of_node);
+ if (!ti_sci_np) {
+ dev_err(dev, "No OF information\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ mutex_lock(&ti_sci_list_mutex);
+ list_for_each(p, &ti_sci_list) {
+ info = list_entry(p, struct ti_sci_info, node);
+ if (ti_sci_np == info->dev->of_node) {
+ handle = &info->handle;
+ info->users++;
+ break;
+ }
+ }
+ mutex_unlock(&ti_sci_list_mutex);
+ of_node_put(ti_sci_np);
+
+ if (!handle)
+ return ERR_PTR(-EPROBE_DEFER);
+
+ return handle;
+}
+EXPORT_SYMBOL_GPL(ti_sci_get_handle);
+
+/**
+ * ti_sci_put_handle() - Release the handle acquired by ti_sci_get_handle
+ * @handle: Handle acquired by ti_sci_get_handle
+ *
+ * NOTE: The function does not track individual clients of the framework
+ * and is expected to be maintained by caller of TI SCI protocol library.
+ * ti_sci_put_handle must be balanced with successful ti_sci_get_handle
+ *
+ * Return: 0 is successfully released
+ * if an error pointer was passed, it returns the error value back,
+ * if null was passed, it returns -EINVAL;
+ */
+int ti_sci_put_handle(const struct ti_sci_handle *handle)
+{
+ struct ti_sci_info *info;
+
+ if (IS_ERR(handle))
+ return PTR_ERR(handle);
+ if (!handle)
+ return -EINVAL;
+
+ info = handle_to_ti_sci_info(handle);
+ mutex_lock(&ti_sci_list_mutex);
+ if (!WARN_ON(!info->users))
+ info->users--;
+ mutex_unlock(&ti_sci_list_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ti_sci_put_handle);
+
+static void devm_ti_sci_release(struct device *dev, void *res)
+{
+ const struct ti_sci_handle **ptr = res;
+ const struct ti_sci_handle *handle = *ptr;
+ int ret;
+
+ ret = ti_sci_put_handle(handle);
+ if (ret)
+ dev_err(dev, "failed to put handle %d\n", ret);
+}
+
+/**
+ * devm_ti_sci_get_handle() - Managed get handle
+ * @dev: device for which we want SCI handle for.
+ *
+ * NOTE: This releases the handle once the device resources are
+ * no longer needed. MUST NOT BE released with ti_sci_put_handle.
+ * The function does not track individual clients of the framework
+ * and is expected to be maintained by caller of TI SCI protocol library.
+ *
+ * Return: 0 if all went fine, else corresponding error.
+ */
+const struct ti_sci_handle *devm_ti_sci_get_handle(struct device *dev)
+{
+ const struct ti_sci_handle **ptr;
+ const struct ti_sci_handle *handle;
+
+ ptr = devres_alloc(devm_ti_sci_release, sizeof(*ptr), GFP_KERNEL);
+ if (!ptr)
+ return ERR_PTR(-ENOMEM);
+ handle = ti_sci_get_handle(dev);
+
+ if (!IS_ERR(handle)) {
+ *ptr = handle;
+ devres_add(dev, ptr);
+ } else {
+ devres_free(ptr);
+ }
+
+ return handle;
+}
+EXPORT_SYMBOL_GPL(devm_ti_sci_get_handle);
+
+/* Description for K2G */
+static const struct ti_sci_desc ti_sci_pmmc_k2g_desc = {
+ .host_id = 2,
+ /* Conservative duration */
+ .max_rx_timeout_ms = 1000,
+ /* Limited by MBOX_TX_QUEUE_LEN. K2G can handle upto 128 messages! */
+ .max_msgs = 20,
+ .max_msg_size = 64,
+};
+
+static const struct of_device_id ti_sci_of_match[] = {
+ {.compatible = "ti,k2g-sci", .data = &ti_sci_pmmc_k2g_desc},
+ { /* Sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, ti_sci_of_match);
+
+static int ti_sci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct of_device_id *of_id;
+ const struct ti_sci_desc *desc;
+ struct ti_sci_xfer *xfer;
+ struct ti_sci_info *info = NULL;
+ struct ti_sci_xfers_info *minfo;
+ struct mbox_client *cl;
+ int ret = -EINVAL;
+ int i;
+
+ of_id = of_match_device(ti_sci_of_match, dev);
+ if (!of_id) {
+ dev_err(dev, "OF data missing\n");
+ return -EINVAL;
+ }
+ desc = of_id->data;
+
+ info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->dev = dev;
+ info->desc = desc;
+ INIT_LIST_HEAD(&info->node);
+ minfo = &info->minfo;
+
+ /*
+ * Pre-allocate messages
+ * NEVER allocate more than what we can indicate in hdr.seq
+ * if we have data description bug, force a fix..
+ */
+ if (WARN_ON(desc->max_msgs >=
+ 1 << 8 * sizeof(((struct ti_sci_msg_hdr *)0)->seq)))
+ return -EINVAL;
+
+ minfo->xfer_block = devm_kcalloc(dev,
+ desc->max_msgs,
+ sizeof(*minfo->xfer_block),
+ GFP_KERNEL);
+ if (!minfo->xfer_block)
+ return -ENOMEM;
+
+ minfo->xfer_alloc_table = devm_kzalloc(dev,
+ BITS_TO_LONGS(desc->max_msgs)
+ * sizeof(unsigned long),
+ GFP_KERNEL);
+ if (!minfo->xfer_alloc_table)
+ return -ENOMEM;
+ bitmap_zero(minfo->xfer_alloc_table, desc->max_msgs);
+
+ /* Pre-initialize the buffer pointer to pre-allocated buffers */
+ for (i = 0, xfer = minfo->xfer_block; i < desc->max_msgs; i++, xfer++) {
+ xfer->xfer_buf = devm_kcalloc(dev, 1, desc->max_msg_size,
+ GFP_KERNEL);
+ if (!xfer->xfer_buf)
+ return -ENOMEM;
+
+ xfer->tx_message.buf = xfer->xfer_buf;
+ init_completion(&xfer->done);
+ }
+
+ ret = ti_sci_debugfs_create(pdev, info);
+ if (ret)
+ dev_warn(dev, "Failed to create debug file\n");
+
+ platform_set_drvdata(pdev, info);
+
+ cl = &info->cl;
+ cl->dev = dev;
+ cl->tx_block = false;
+ cl->rx_callback = ti_sci_rx_callback;
+ cl->knows_txdone = true;
+
+ spin_lock_init(&minfo->xfer_lock);
+ sema_init(&minfo->sem_xfer_count, desc->max_msgs);
+
+ info->chan_rx = mbox_request_channel_byname(cl, "rx");
+ if (IS_ERR(info->chan_rx)) {
+ ret = PTR_ERR(info->chan_rx);
+ goto out;
+ }
+
+ info->chan_tx = mbox_request_channel_byname(cl, "tx");
+ if (IS_ERR(info->chan_tx)) {
+ ret = PTR_ERR(info->chan_tx);
+ goto out;
+ }
+ ret = ti_sci_cmd_get_revision(info);
+ if (ret) {
+ dev_err(dev, "Unable to communicate with TISCI(%d)\n", ret);
+ goto out;
+ }
+
+ dev_info(dev, "ABI: %d.%d (firmware rev 0x%04x '%s')\n",
+ info->handle.version.abi_major, info->handle.version.abi_minor,
+ info->handle.version.firmware_revision,
+ info->handle.version.firmware_description);
+
+ mutex_lock(&ti_sci_list_mutex);
+ list_add_tail(&info->node, &ti_sci_list);
+ mutex_unlock(&ti_sci_list_mutex);
+
+ return of_platform_populate(dev->of_node, NULL, NULL, dev);
+out:
+ if (!IS_ERR(info->chan_tx))
+ mbox_free_channel(info->chan_tx);
+ if (!IS_ERR(info->chan_rx))
+ mbox_free_channel(info->chan_rx);
+ debugfs_remove(info->d);
+ return ret;
+}
+
+static int ti_sci_remove(struct platform_device *pdev)
+{
+ struct ti_sci_info *info;
+ struct device *dev = &pdev->dev;
+ int ret = 0;
+
+ of_platform_depopulate(dev);
+
+ info = platform_get_drvdata(pdev);
+
+ mutex_lock(&ti_sci_list_mutex);
+ if (info->users)
+ ret = -EBUSY;
+ else
+ list_del(&info->node);
+ mutex_unlock(&ti_sci_list_mutex);
+
+ if (!ret) {
+ ti_sci_debugfs_destroy(pdev, info);
+
+ /* Safe to free channels since no more users */
+ mbox_free_channel(info->chan_tx);
+ mbox_free_channel(info->chan_rx);
+ }
+
+ return ret;
+}
+
+static struct platform_driver ti_sci_driver = {
+ .probe = ti_sci_probe,
+ .remove = ti_sci_remove,
+ .driver = {
+ .name = "ti-sci",
+ .of_match_table = of_match_ptr(ti_sci_of_match),
+ },
+};
+module_platform_driver(ti_sci_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TI System Control Interface(SCI) driver");
+MODULE_AUTHOR("Nishanth Menon");
+MODULE_ALIAS("platform:ti-sci");
diff --git a/drivers/firmware/ti_sci.h b/drivers/firmware/ti_sci.h
new file mode 100644
index 000000000000..e9dc53f26e0e
--- /dev/null
+++ b/drivers/firmware/ti_sci.h
@@ -0,0 +1,93 @@
+/*
+ * Texas Instruments System Control Interface (TISCI) Protocol
+ *
+ * Communication protocol with TI SCI hardware
+ * The system works in a message response protocol
+ * See: http://processors.wiki.ti.com/index.php/TISCI for details
+ *
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the
+ * distribution.
+ *
+ * Neither the name of Texas Instruments Incorporated nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __TI_SCI_H
+#define __TI_SCI_H
+
+/* Generic Messages */
+#define TI_SCI_MSG_ENABLE_WDT 0x0000
+#define TI_SCI_MSG_WAKE_RESET 0x0001
+#define TI_SCI_MSG_VERSION 0x0002
+#define TI_SCI_MSG_WAKE_REASON 0x0003
+#define TI_SCI_MSG_GOODBYE 0x0004
+
+/**
+ * struct ti_sci_msg_hdr - Generic Message Header for All messages and responses
+ * @type: Type of messages: One of TI_SCI_MSG* values
+ * @host: Host of the message
+ * @seq: Message identifier indicating a transfer sequence
+ * @flags: Flag for the message
+ */
+struct ti_sci_msg_hdr {
+ u16 type;
+ u8 host;
+ u8 seq;
+#define TI_SCI_MSG_FLAG(val) (1 << (val))
+#define TI_SCI_FLAG_REQ_GENERIC_NORESPONSE 0x0
+#define TI_SCI_FLAG_REQ_ACK_ON_RECEIVED TI_SCI_MSG_FLAG(0)
+#define TI_SCI_FLAG_REQ_ACK_ON_PROCESSED TI_SCI_MSG_FLAG(1)
+#define TI_SCI_FLAG_RESP_GENERIC_NACK 0x0
+#define TI_SCI_FLAG_RESP_GENERIC_ACK TI_SCI_MSG_FLAG(1)
+ /* Additional Flags */
+ u32 flags;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_version - Response for a message
+ * @hdr: Generic header
+ * @firmware_description: String describing the firmware
+ * @firmware_revision: Firmware revision
+ * @abi_major: Major version of the ABI that firmware supports
+ * @abi_minor: Minor version of the ABI that firmware supports
+ *
+ * In general, ABI version changes follow the rule that minor version increments
+ * are backward compatible. Major revision changes in ABI may not be
+ * backward compatible.
+ *
+ * Response to a generic message with message type TI_SCI_MSG_VERSION
+ */
+struct ti_sci_msg_resp_version {
+ struct ti_sci_msg_hdr hdr;
+ char firmware_description[32];
+ u16 firmware_revision;
+ u8 abi_major;
+ u8 abi_minor;
+} __packed;
+
+#endif /* __TI_SCI_H */
diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h
new file mode 100644
index 000000000000..e73483fd5327
--- /dev/null
+++ b/include/linux/soc/ti/ti_sci_protocol.h
@@ -0,0 +1,69 @@
+/*
+ * Texas Instruments System Control Interface Protocol
+ *
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Nishanth Menon
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __TISCI_PROTOCOL_H
+#define __TISCI_PROTOCOL_H
+
+/**
+ * struct ti_sci_version_info - version information structure
+ * @abi_major: Major ABI version. Change here implies risk of backward
+ * compatibility break.
+ * @abi_minor: Minor ABI version. Change here implies new feature addition,
+ * or compatible change in ABI.
+ * @firmware_revision: Firmware revision (not usually used).
+ * @firmware_description: Firmware description (not usually used).
+ */
+struct ti_sci_version_info {
+ u8 abi_major;
+ u8 abi_minor;
+ u16 firmware_revision;
+ char firmware_description[32];
+};
+
+/**
+ * struct ti_sci_handle - Handle returned to TI SCI clients for usage.
+ * @version: structure containing version information
+ */
+struct ti_sci_handle {
+ struct ti_sci_version_info version;
+};
+
+#if IS_ENABLED(CONFIG_TI_SCI_PROTOCOL)
+const struct ti_sci_handle *ti_sci_get_handle(struct device *dev);
+int ti_sci_put_handle(const struct ti_sci_handle *handle);
+const struct ti_sci_handle *devm_ti_sci_get_handle(struct device *dev);
+
+#else /* CONFIG_TI_SCI_PROTOCOL */
+
+static inline const struct ti_sci_handle *ti_sci_get_handle(struct device *dev)
+{
+ return ERR_PTR(-EINVAL);
+}
+
+static inline int ti_sci_put_handle(const struct ti_sci_handle *handle)
+{
+ return -EINVAL;
+}
+
+static inline
+const struct ti_sci_handle *devm_ti_sci_get_handle(struct device *dev)
+{
+ return ERR_PTR(-EINVAL);
+}
+
+#endif /* CONFIG_TI_SCI_PROTOCOL */
+
+#endif /* __TISCI_PROTOCOL_H */
--
2.10.0
More information about the linux-arm-kernel
mailing list