[PATCH v2 26/58] c8sectpfe: don't break long lines
Mauro Carvalho Chehab
mchehab at s-opensource.com
Tue Oct 18 13:45:38 PDT 2016
Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.
As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.
So, join those continuation lines.
The patch was generated via the script below, and manually
adjusted if needed.
</script>
use Text::Tabs;
while (<>) {
if ($next ne "") {
$c=$_;
if ($c =~ /^\s+\"(.*)/) {
$c2=$1;
$next =~ s/\"\n$//;
$n = expand($next);
$funpos = index($n, '(');
$pos = index($c2, '",');
if ($funpos && $pos > 0) {
$s1 = substr $c2, 0, $pos + 2;
$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
$s2 =~ s/^\s+//;
$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");
print unexpand("$next$s1\n");
print unexpand("$s2\n") if ($s2 ne "");
} else {
print "$next$c2\n";
}
$next="";
next;
} else {
print $next;
}
$next="";
} else {
if (m/\"$/) {
if (!m/\\n\"$/) {
$next=$_;
next;
}
}
}
print $_;
}
</script>
Acked-by: Peter Griffin <peter.griffin at linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab at s-opensource.com>
---
drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
diff --git a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
index 30c148b9d65e..42b123ff2953 100644
--- a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
+++ b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
@@ -112,8 +112,7 @@ static void channel_swdemux_tsklet(unsigned long data)
buf = (u8 *) channel->back_buffer_aligned;
dev_dbg(fei->dev,
- "chan=%d channel=%p num_packets = %d, buf = %p, pos = 0x%x\n\t"
- "rp=0x%lx, wp=0x%lx\n",
+ "chan=%d channel=%p num_packets = %d, buf = %p, pos = 0x%x\n\trp=0x%lx, wp=0x%lx\n",
channel->tsin_id, channel, num_packets, buf, pos, rp, wp);
for (n = 0; n < num_packets; n++) {
@@ -789,8 +788,7 @@ static int c8sectpfe_probe(struct platform_device *pdev)
/* sanity check value */
if (tsin->tsin_id > fei->hw_stats.num_ib) {
dev_err(&pdev->dev,
- "tsin-num %d specified greater than number\n\t"
- "of input block hw in SoC! (%d)",
+ "tsin-num %d specified greater than number\n\tof input block hw in SoC! (%d)",
tsin->tsin_id, fei->hw_stats.num_ib);
ret = -EINVAL;
goto err_clk_disable;
@@ -855,8 +853,7 @@ static int c8sectpfe_probe(struct platform_device *pdev)
tsin->demux_mapping = index;
dev_dbg(fei->dev,
- "channel=%p n=%d tsin_num=%d, invert-ts-clk=%d\n\t"
- "serial-not-parallel=%d pkt-clk-valid=%d dvb-card=%d\n",
+ "channel=%p n=%d tsin_num=%d, invert-ts-clk=%d\n\tserial-not-parallel=%d pkt-clk-valid=%d dvb-card=%d\n",
fei->channel_data[index], index,
tsin->tsin_id, tsin->invert_ts_clk,
tsin->serial_not_parallel, tsin->async_not_sync,
@@ -1045,8 +1042,8 @@ static void load_imem_segment(struct c8sectpfei *fei, Elf32_Phdr *phdr,
*/
dev_dbg(fei->dev,
- "Loading IMEM segment %d 0x%08x\n\t"
- " (0x%x bytes) -> 0x%p (0x%x bytes)\n", seg_num,
+ "Loading IMEM segment %d 0x%08x\n\t (0x%x bytes) -> 0x%p (0x%x bytes)\n",
+seg_num,
phdr->p_paddr, phdr->p_filesz,
dest, phdr->p_memsz + phdr->p_memsz / 3);
@@ -1075,8 +1072,7 @@ static void load_dmem_segment(struct c8sectpfei *fei, Elf32_Phdr *phdr,
*/
dev_dbg(fei->dev,
- "Loading DMEM segment %d 0x%08x\n\t"
- "(0x%x bytes) -> 0x%p (0x%x bytes)\n",
+ "Loading DMEM segment %d 0x%08x\n\t(0x%x bytes) -> 0x%p (0x%x bytes)\n",
seg_num, phdr->p_paddr, phdr->p_filesz,
dst, phdr->p_memsz);
--
2.7.4
More information about the linux-arm-kernel
mailing list