[PATCH v2 2/4] ARM: dts: pxa: add pxa25x cpu operating points

[Viresh Kumar]

On 15-10-16, 21:57, Robert Jarzmik wrote:
> Add the relevant data taken from the PXA 25x Electrical, Mechanical, and
> Thermal Specfication. This will be input data for cpufreq-dt driver.
> 
> Signed-off-by: Robert Jarzmik <robert.jarzmik at free.fr>
> ---
>  arch/arm/boot/dts/pxa25x.dtsi | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi
> index 0d1e012178c4..16b4e8bad4a5 100644
> --- a/arch/arm/boot/dts/pxa25x.dtsi
> +++ b/arch/arm/boot/dts/pxa25x.dtsi
> @@ -89,4 +89,29 @@
>  		clocks = <&clktimer>;
>  		status = "okay";
>  	};
> +
> +	pxa250_opp_table: opp_table0 {
> +		compatible = "operating-points-v2";
> +
> +		opp at 99500 {

We have been keeping the values in ^^^ same as the values present
below. Any specific reason for making it different here ?

> +			opp-hz = /bits/ 64 <99532800>;
> +			opp-microvolt = <950000 1000000 1650000>;
> +			clock-latency-ns = <20>;
> +		};
> +		opp at 199100 {
> +			opp-hz = /bits/ 64 <199065600>;
> +			opp-microvolt = <1000000 950000 1650000>;
> +			clock-latency-ns = <20>;
> +		};
> +		opp at 298600 {
> +			opp-hz = /bits/ 64 <298598400>;
> +			opp-microvolt = <1100000 1045000 1650000>;
> +			clock-latency-ns = <20>;
> +		};
> +		opp at 398100 {
> +			opp-hz = /bits/ 64 <398131200>;
> +			opp-microvolt = <1300000 1235000 1650000>;
> +			clock-latency-ns = <20>;
> +		};
> +	};
>  };
> -- 
> 2.1.4

-- 
viresh