[PATCH v2] arm64: kernel: numa: fix ACPI boot cpu numa node mapping

Hanjun Guo hanjun.guo at linaro.org
Tue Oct 18 01:39:59 PDT 2016


On 2016/10/17 22:56, Lorenzo Pieralisi wrote:
> Commit 7ba5f605f3a0 ("arm64/numa: remove the limitation that cpu0 must
> bind to node0") removed the numa cpu<->node mapping restriction whereby
> logical cpu 0 always corresponds to numa node 0; removing the
> restriction was correct, in that it does not really exist in practice
> but the commit only updated the early mapping of logical cpu 0 to its
> real numa node for the DT boot path, missing the ACPI one, leading to
> boot failures on ACPI systems owing to missing cpu<->node map for
> logical cpu 0.
>
> Fix the issue by updating the ACPI boot path with code that carries out
> the early cpu<->node mapping also for the boot cpu (ie cpu 0), mirroring
> what is currently done in the DT boot path.
>
> Fixes: 7ba5f605f3a0 ("arm64/numa: remove the limitation that cpu0 must bind to node0")
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
> Tested-by: Laszlo Ersek <lersek at redhat.com>
> Reported-by: Laszlo Ersek <lersek at redhat.com>
> Cc: Will Deacon <will.deacon at arm.com>
> Cc: Laszlo Ersek <lersek at redhat.com>
> Cc: Hanjun Guo <hanjun.guo at linaro.org>

Thanks for the quick response and fix,

Acked-by: Hanjun Guo <hanjun.guo at linaro.org>

By the way, I got another boot failure [1] when we have multi
NUMA nodes system with some memory-less nodes (only one node
have memory), we are looking into it now, this patch needs
to be merged first.

Thanks
Hanjun

[1]: boot failure log:
[    0.000000] NUMA: Adding memblock [0x0 - 0x3fffffff] on node 0
[    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x3fffffff]
[    0.000000] NUMA: Adding memblock [0x1400000000 - 0x17ffffffff] on node 1
[    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x1400000000-0x17ffffffff]
[    0.000000] NUMA: Adding memblock [0x1000000000 - 0x13ffffffff] on node 0
[    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x1000000000-0x13ffffffff]
[    0.000000] NUMA: Initmem setup node 0 [mem 0x00000000-0x13fbffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x13fbffe500-0x13fbffffff]
[    0.000000] NUMA: Initmem setup node 1 [mem 0x1400000000-0x17fbffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x17fbfec500-0x17fbfedfff]
[    0.000000] NUMA: Initmem setup node 2 [mem 
0x00000000-0xffffffffffffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x17fbfeaa00-0x17fbfec4ff]
[    0.000000] NUMA: NODE_DATA(2) on node 1
[    0.000000] NUMA: Initmem setup node 3 [mem 
0x00000000-0xffffffffffffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x17fbfe8f00-0x17fbfea9ff]
[    0.000000] NUMA: NODE_DATA(3) on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000017fbffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000000024fff]
[    0.000000]   node   0: [mem 0x0000000000026000-0x00000000319dffff]
[    0.000000]   node   0: [mem 0x00000000319e0000-0x0000000031a4ffff]
[    0.000000]   node   0: [mem 0x0000000031a50000-0x0000000031b2ffff]
[    0.000000]   node   0: [mem 0x0000000031b30000-0x0000000031b3ffff]
[    0.000000]   node   0: [mem 0x0000000031b40000-0x0000000039baffff]
[    0.000000]   node   0: [mem 0x0000000039bb0000-0x000000003a143fff]
[    0.000000]   node   0: [mem 0x000000003a144000-0x000000003f12ffff]
[    0.000000]   node   0: [mem 0x000000003f130000-0x000000003f15ffff]
[    0.000000]   node   0: [mem 0x000000003f160000-0x000000003fbfffff]
[    0.000000]   node   0: [mem 0x0000001040000000-0x00000013fbffffff]
[    0.000000]   node   1: [mem 0x0000001400000000-0x00000017fbffffff]
[    0.000000] Initmem setup node 0 [mem 
0x0000000000000000-0x00000013fbffffff]
[    0.000000] Initmem setup node 1 [mem 
0x0000001400000000-0x00000017fbffffff]
[    0.000000] Could not find start_pfn for node 2
[    0.000000] Initmem setup node 2 [mem 
0x0000000000000000-0x0000000000000000]
[    0.000000] Could not find start_pfn for node 3
[    0.000000] Initmem setup node 3 [mem 
0x0000000000000000-0x0000000000000000]
[    0.000000] psci: probing for conduit method from ACPI.
[    0.000000] ------------[ cut here ]------------
[    0.000000] kernel BUG at mm/percpu.c:1916!
[    0.000000] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 
4.9.0-rc1-00083-g3dd62e5 #680
[    0.000000] Hardware name: Hisilicon Hi1616 Evaluation Board (DT)
[    0.000000] task: ffff000008d5e980 task.stack: ffff000008d50000
[    0.000000] PC is at pcpu_embed_first_chunk+0x464/0x754
[    0.000000] LR is at pcpu_embed_first_chunk+0x3f8/0x754
[    0.000000] pc : [<ffff000008c65af0>] lr : [<ffff000008c65a84>] 
pstate: 200000c5
[    0.000000] sp : ffff000008d53e90
[    0.000000] x29: ffff000008d53e90 [    0.000000] x28: 0000000000000000
[    0.000000]
[    0.000000] x27: ffff000008d55e50 [    0.000000] x26: 0000000000000042
[    0.000000]
[    0.000000] x25: ffff000008d55d28 [    0.000000] x24: 0000000000000046
[    0.000000]
[    0.000000] x23: 0000000000000040 [    0.000000] x22: ffff8017fbfcff00
[    0.000000]
[    0.000000] x21: ffff000008ca6e20 [    0.000000] x20: ffff8017fbfd0518
[    0.000000]
[    0.000000] x19: 0000000000000042 [    0.000000] x18: ffff000008e3fb60
[    0.000000]
[    0.000000] x17: 000000000000001b [    0.000000] x16: 000000000000000b
[    0.000000]
[    0.000000] x15: 0000001400000000 [    0.000000] x14: 0000000000000004
[    0.000000]
[    0.000000] x13: 0000000000000000 [    0.000000] x12: 0000000000000069
[    0.000000]
[    0.000000] x11: 00000017fbffff00 [    0.000000] x10: 0000000000000004
[    0.000000]
[    0.000000] x9 : 0000000000000000 [    0.000000] x8 : ffff8017fbfd0f00
[    0.000000]
[    0.000000] x7 : 0000000000000000 [    0.000000] x6 : 0000000000000000
[    0.000000]
[    0.000000] x5 : 0000000000000000 [    0.000000] x4 : 000000000000003f
[    0.000000]
[    0.000000] x3 : 0000000000000040 [    0.000000] x2 : 0000000000000040
[    0.000000]
[    0.000000] x1 : 0000000000000001 [    0.000000] x0 : ffff000008ca7328
[    0.000000]
[    0.000000]
[    0.000000] Process swapper (pid: 0, stack limit = 0xffff000008d50020)
[    0.000000] Stack: (0xffff000008d53e90 to 0xffff000008d54000)
[    0.000000] 3e80:                                   ffff000008d53f60 
ffff000008c5616c
[    0.000000] 3ea0: ffff000008ca5a08 ffff000008e2a000 ffff000008e2a000 
ffff000008d55000
[    0.000000] 3ec0: ffff000008ca5a08 ffff8017fbfffe80 0000000000000168 
000000003c96a518
[    0.000000] 3ee0: 000000003c971b98 0000000000c50018 ffff000008d53f60 
ffff000008c56078
[    0.000000] 3f00: ffff000008d1f000 ffff000008d14000 0000000000007480 
0000000000002000
[    0.000000] 3f20: ffff000008c560b0 0000000000001000 ffff000008d55e50 
ffff000008d55d28
[    0.000000] 3f40: ffff000008ca6000 0000000000000040 0000000000000001 
0000000000000040
[    0.000000] 3f60: ffff000008d53fa0 ffff000008c508d4 ffff000008ca5a08 
ffff000008e2a000
[    0.000000] 3f80: ffff000008e2a000 ffff000008d55000 ffff000008ca5a08 
ffff000008c508d0
[    0.000000] 3fa0: ffff000008d53ff0 ffff000008c501d8 000000003c94fa98 
000000001e400000
[    0.000000] 3fc0: 000000001e400000 000000025497ba19 0000000000000000 
000000003f198a08
[    0.000000] 3fe0: 0000000000000000 ffff000008ca5a08 0000000000000000 
00000000008a325c
[    0.000000] Call trace:
[    0.000000] Exception stack(0xffff000008d53cc0 to 0xffff000008d53df0)
[    0.000000] 3cc0: 0000000000000042 0001000000000000 ffff000008d53e90 
ffff000008c65af0
[    0.000000] 3ce0: ffff000008d53d30 ffff0000081aa024 0000000000000001 
0000000000001000
[    0.000000] 3d00: ffff000008d53d30 ffff0000081aa034 0000000000000001 
0000000000001000
[    0.000000] 3d20: 00000017fbfcff00 0000000000000004 ffff000008d53d90 
ffff0000081aa2c8
[    0.000000] 3d40: 00000017fbfcff00 0000000000001000 0000000000000000 
0000000000000000
[    0.000000] 3d60: ffff000008ca7328 0000000000000001 0000000000000040 
0000000000000040
[    0.000000] 3d80: 000000000000003f 0000000000000000 0000000000000000 
0000000000000000
[    0.000000] 3da0: ffff8017fbfd0f00 0000000000000000 0000000000000004 
00000017fbffff00
[    0.000000] 3dc0: 0000000000000069 0000000000000000 0000000000000004 
0000001400000000
[    0.000000] 3de0: 000000000000000b 000000000000001b
[    0.000000] [<ffff000008c65af0>] pcpu_embed_first_chunk+0x464/0x754
[    0.000000] [<ffff000008c5616c>] setup_per_cpu_areas+0x3c/0xcc
[    0.000000] [<ffff000008c508d4>] start_kernel+0x10c/0x398
[    0.000000] [<ffff000008c501d8>] __primary_switched+0x5c/0x64
[    0.000000] Code: 0b000318 17ffffd8 6b17031f 54000080 (d4210000)
[    0.000000] ---[ end trace 0000000000000000 ]---
[    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[    0.000000] ---[ end Kernel panic - not syncing: Attempted to kill 
the idle task!




More information about the linux-arm-kernel mailing list