[PATCH RESEND 1/3] clk: imx6: Mask mmdc_ch1 handshake for periph2_sel and mmdc_ch1_axi_podf
Fabio Estevam
festevam at gmail.com
Mon Oct 17 17:29:12 PDT 2016
From: Philipp Zabel <p.zabel at pengutronix.de>
MMDC CH1 is not used on i.MX6Q, so the handshake needed to change the
parent of periph2_sel or the divider of mmdc_ch1_axi_podf will never
succeed.
Disable the handshake mechanism to allow changing the frequency of
mmdc_ch1_axi, allowing to use it as a possible source for the LDB DI
clock.
Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
---
drivers/clk/imx/clk-imx6q.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c
index ce8ea10..66825a8 100644
--- a/drivers/clk/imx/clk-imx6q.c
+++ b/drivers/clk/imx/clk-imx6q.c
@@ -156,6 +156,19 @@ static struct clk ** const uart_clks[] __initconst = {
NULL
};
+#define CCM_CCDR 0x04
+
+#define CCDR_MMDC_CH1_MASK BIT(16)
+
+static void __init imx6q_mmdc_ch1_mask_handshake(void __iomem *ccm_base)
+{
+ unsigned int reg;
+
+ reg = readl_relaxed(ccm_base + CCM_CCDR);
+ reg |= CCDR_MMDC_CH1_MASK;
+ writel_relaxed(reg, ccm_base + CCM_CCDR);
+}
+
static void __init imx6q_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
@@ -297,6 +310,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
base = of_iomap(np, 0);
WARN_ON(!base);
+ imx6q_mmdc_ch1_mask_handshake(base);
+
/* name reg shift width parent_names num_parents */
clk[IMX6QDL_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels));
clk[IMX6QDL_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
--
2.7.4
More information about the linux-arm-kernel
mailing list