[PATCH v2 2/3] arm: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible"
Jagan Teki
jteki at openedev.com
Fri Oct 14 02:39:29 PDT 2016
Fixed code indent tabs in respetcive imx6qdl dtsi files.
Cc: Shawn Guo <shawnguo at kernel.org>
Signed-off-by: Jagan Teki <jteki at openedev.com>
---
Changes for v2:
- none
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 6 +++---
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl.dtsi | 6 +++---
8 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index a7100f9..54aca3a 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -153,9 +153,9 @@
&clks {
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
- <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
- <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
};
&ecspi3 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 8953eba..88e5cb3b 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -154,9 +154,9 @@
&clks {
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
- <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
- <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
};
&fec {
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 6ac41c7..1753ab7 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -144,9 +144,9 @@
&clks {
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
- <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
- <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
};
&fec {
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index 805e236..ee83161 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -291,7 +291,7 @@
MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
>;
- };
+ };
pinctrl_wdog: wdoggrp {
fsl,pins = <
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index e0280cac2..e9801a2 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -427,10 +427,10 @@
};
&usdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3
&pinctrl_usdhc3_cdwp>;
cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
- status = "disabled";
+ status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index e000e6f..8006467 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -283,7 +283,7 @@
VD-supply = <®_audio>;
VLS-supply = <®_audio>;
VLC-supply = <®_audio>;
- };
+ };
};
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 8e9e0d9..55ef535 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -129,8 +129,8 @@
pinctrl-0 = <&pinctrl_gpio_leds>;
red {
- gpios = <&gpio1 2 0>;
- default-state = "on";
+ gpios = <&gpio1 2 0>;
+ default-state = "on";
};
};
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index b13b0b2..1bbd36f 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -204,9 +204,9 @@
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
<&clks IMX6QDL_CLK_LVDS1_GATE>,
<&clks IMX6QDL_CLK_PCIE_REF_125M>;
--
2.7.4
More information about the linux-arm-kernel
mailing list