Low network throughput on i.MX28
Lothar Waßmann
LW at KARO-electronics.de
Thu Oct 13 23:13:49 PDT 2016
Hi,
On Thu, 13 Oct 2016 21:43:00 +0200 Jörg Krause wrote:
> Am 13. Oktober 2016 08:48:07 MESZ, schrieb "Lothar Waßmann" <LW at KARO-electronics.de>:
> >On Thu, 13 Oct 2016 01:09:13 +0200 Jörg Krause wrote:
[...]
> >This is the iperf output on a TX28 with current mainline kernel
> >(4.8.0-rc5):
> >------------------------------------------------------------
> >Client connecting to 192.168.100.1, TCP port 5001
> >TCP window size: 43.8 KByte (default)
> >------------------------------------------------------------
> >[ 3] local 192.168.100.56 port 60325 connected with 192.168.100.1 port
> >5001
> >[ ID] Interval Transfer Bandwidth
> >[ 3] 0.0-10.0 sec 57.5 MBytes 48.2 Mbits/sec
> >
> >You might check your kernel DEBUG configs (especially
> >CONFIG_DEBUG_PAGEALLOC).
>
> Thanks for sharing the iperf output. What LAN transceiver does the TX28 has assembled?
>
The ethernet PHY is an SMSC LAN8710A.
Lothar Waßmann
More information about the linux-arm-kernel
mailing list