[PATCH v5 01/14] drivers: iommu: add FWNODE_IOMMU fwnode type

Thu Oct 13 13:53:27 PDT 2016

Hi,

On Thu, Oct 13, 2016 at 6:32 PM, Lorenzo Pieralisi
<lorenzo.pieralisi at arm.com> wrote:
> Hi Rafael,
>
> On Fri, Sep 30, 2016 at 05:48:01PM +0200, Rafael J. Wysocki wrote:
>> On Fri, Sep 30, 2016 at 11:07 AM, Lorenzo Pieralisi
>> <lorenzo.pieralisi at arm.com> wrote:
>> > On Thu, Sep 29, 2016 at 10:59:40PM +0200, Rafael J. Wysocki wrote:
>> >> On Thursday, September 29, 2016 03:15:20 PM Lorenzo Pieralisi wrote:
>> >> > Hi Rafael,
>> >> >
>> >> > On Fri, Sep 09, 2016 at 03:23:30PM +0100, Lorenzo Pieralisi wrote:
>> >> > > On systems booting with a device tree, every struct device is
>> >> > > associated with a struct device_node, that represents its DT
>> >> > > representation. The device node can be used in generic kernel
>> >> > > contexts (eg IRQ translation, IOMMU streamid mapping), to
>> >> > > retrieve the properties associated with the device and carry
>> >> > > out kernel operation accordingly. Owing to the 1:1 relationship
>> >> > > between the device and its device_node, the device_node can also
>> >> > > be used as a look-up token for the device (eg looking up a device
>> >> > > through its device_node), to retrieve the device in kernel paths
>> >> > > where the device_node is available.
>> >> > >
>> >> > > On systems booting with ACPI, the same abstraction provided by
>> >> > > the device_node is required to provide look-up functionality.
>> >> > >
>> >> > > Therefore, mirroring the approach implemented in the IRQ domain
>> >> > > kernel layer, this patch adds an additional fwnode type FWNODE_IOMMU.
>> >> > >
>> >> > > This patch also implements a glue kernel layer that allows to
>> >> > > allocate/free FWNODE_IOMMU fwnode_handle structures and associate
>> >> > > them with IOMMU devices.
>> >> > >
>> >> > > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
>> >> > > Reviewed-by: Hanjun Guo <hanjun.guo at linaro.org>
>> >> > > Cc: Joerg Roedel <joro at 8bytes.org>
>> >> > > Cc: "Rafael J. Wysocki" <rjw at rjwysocki.net>
>> >> > > ---
>> >> > >  include/linux/fwnode.h |  1 +
>> >> > >  include/linux/iommu.h  | 25 +++++++++++++++++++++++++
>> >> > >  2 files changed, 26 insertions(+)
>> >> > >
>> >> > > diff --git a/include/linux/fwnode.h b/include/linux/fwnode.h
>> >> > > index 8516717..6e10050 100644
>> >> > > --- a/include/linux/fwnode.h
>> >> > > +++ b/include/linux/fwnode.h
>> >> > > @@ -19,6 +19,7 @@ enum fwnode_type {
>> >> > >   FWNODE_ACPI_DATA,
>> >> > >   FWNODE_PDATA,
>> >> > >   FWNODE_IRQCHIP,
>> >> > > + FWNODE_IOMMU,
>> >> >
>> >> > This patch provides groundwork for this series and it is key for
>> >> > the rest of it, basically the point here is that we need a fwnode
>> >> > to differentiate platform devices created out of static ACPI tables
>> >> > entries (ie IORT), that represent IOMMU components.
>> >> >
>> >> > The corresponding device is not an ACPI device (I could fabricate one as
>> >> > it is done for other static tables entries eg FADT power button, but I
>> >> > do not necessarily see the reason for doing that given that all we need
>> >> > the fwnode for is a token identifier), so FWNODE_ACPI does not apply
>> >> > here.
>> >> >
>> >> > Please let me know if it is reasonable how I sorted this out (it
>> >> > is basically identical to IRQCHIP, just another enum entry), the
>> >> > remainder of the code depends on this.
>> >>
>> >> I'm not familiar with the use case, so I don't see anything unreasonable
>> >> in it.
>> >
>> > The use case is pretty simple: on ARM SMMU devices are platform devices.
>> > When booting with DT they are identified through an of_node and related
>> > FWNODE_OF type. When booting with ACPI, the ARM SMMU platform devices,
>> > to be equivalent to DT booting path, should be created out of static
>> > IORT table entries (that's how we describe SMMUs); we need to create
>> > a fwnode "token" to associate with those platform devices and that's
>> > not a FWNODE_ACPI (that is for an ACPI device firmware object, here we
>> > really do not need one), so this patch.
>> >
>> >> If you're asking about whether or not I mind adding more fwnode types in
>> >> principle, then no, I don't. :-)
>> >
>> > Yes, that's what I was asking, the only point that bugs me is that for
>> > both FWNODE_IRQCHIP and FWNODE_IOMMU the fwnode is just a "token" (ie a
>> > valid pointer) used for look-up and the type in the fwnode_handle is
>> > mostly there for error checking, I was wondering if we could create a
>> > specific fwnode_type for this specific usage (eg FWNODE_TAG and then add
>> > a type to it as part of its container struct) instead of adding an enum
>> > value per subsystem - it seems there are other fwnode types in the
>> > pipeline :), so I am asking:
>> >
>> > lkml.kernel.org/r/3D1468514043-21081-3-git-send-email-minyard at acm.org
>>
>> OK, I see your concern now, so thanks for presenting it so clearly.
>>
>> While I don't see anything wrong with having per-subsystem fwnode
>> types in principle, I agree that if the only purpose of them is to
>> mean "this comes from ACPI, but from a static table, not from the
>> namespace", it would be better to have a single fwnode type for that,
>> like FWNODE_ACPI_STATIC or similar.
>
> Coming back to this, I updated the series with new fwnode type
> FWNODE_ACPI_STATIC, which IMHO makes more sense (because that
> represents the FW interface it was obtained from rather than
> its content and plays better with upcoming extension above - DMI is a
> different firmware interface so it will be represented with a different
> fwnode type). Thanks.

OK

> However, I still have a question. The approach I took (create platform
> devices out of static IORT table entries for SMMUs) is common in ACPI
> (eg GHES, ACPI watchdog) even though those subsystems ignore the fwnode,
> but I think that's a detail.
>
> Still, fixed HW like power button and sleep button took a different
> approach, which consists in creating struct acpi_device objects out
> of FADT fixed HW features (with a NULL ACPI handle because there is
> no real ACPI object in the namespace for them).

That's how it was done in the past and the code is not functionally
problematic, so I saw no reason to re-implement it (which might
introduce regressions).

> I would like to understand the reasoning behind the difference (I
> think it is related to notification events and the need for an
> ACPI object for them - and sysfs userspace HID IF exposure ?).

I don't think there is a real need for that model and that's why it is
not used any more.  It's legacy mostly.

> In theory (but looks crazy to me that's why I did not do it), I could
> fabricate a Device object in the ACPI namespace (?) (with _HID, _CRS and
> related properties - is that doable ?) out of the static table entry in
> the IORT table that provides the ARM SMMU component data (ie its MMIO
> space, IRQs and SMMU properties like cache coherency), this would
> allow the kernel to create a struct acpi_device (and related fwnode)
> + its physical node platform device but that looks insanely complicated
> (if feasible and more importantly if correct from an ACPI standpoint).
>
> This approach would allow me to match the SMMU driver with an _HID,
> the kernel would create a physical_node (ie platform_device) for
> me out of the namespace ACPI device object and I would get the
> FWNODE_ACPI for free (out of the struct acpi_device) instead of having
> to fiddle about with a new fwnode_handle type.
>
> I think this alternative approach (if doable at all) creates more issues
> than it solves but I wanted to make sure what I am doing is kosher
> from an ACPI perspective so I am asking.

That's most likely how I would do it, so fine by me. :-)

> I definitely think the current approach I took is much better, with its
> own downsides (eg matching the ARM SMMU driver by name instead of
> acpi_device_id/_HID), but I wanted to ask.
>
> The point is: ARM SMMU drivers are platform drivers. In DT the SMMUs
> are represented through DT nodes, in ACPI through _static_ IORT table
> entries, somehow a platform device must be created for them, so
> this whole series (and related fwnode issues).

Right.  No disagreement.

Thanks,
Rafael