[PATCH V3 09/10] trace, ras: add ARM processor error trace event

[Steven Rostedt]

On Fri,  7 Oct 2016 15:31:21 -0600
Tyler Baicar <tbaicar at codeaurora.org> wrote:

> Currently there are trace events for the various RAS
> errors with the exception of ARM processor type errors.
> Add a new trace event for such errors so that the user
> will know when they occur. These trace events are
> consistent with the ARM processor error section type
> defined in UEFI 2.6 spec section N.2.4.4.
> 
> Signed-off-by: Tyler Baicar <tbaicar at codeaurora.org>
> ---
>  drivers/firmware/efi/cper.c |  9 ++++++
>  drivers/ras/ras.c           |  1 +
>  include/ras/ras_event.h     | 67 +++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 77 insertions(+)
> 
> diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
> index f9ffba6..21b8a6f 100644
> --- a/drivers/firmware/efi/cper.c
> +++ b/drivers/firmware/efi/cper.c
> @@ -34,6 +34,7 @@
>  #include <linux/aer.h>
>  #include <linux/printk.h>
>  #include <linux/bcd.h>
> +#include <ras/ras_event.h>
>  
>  #define INDENT_SP	" "
>  
> @@ -256,6 +257,14 @@ static void cper_print_proc_armv8(const char *pfx,
>  		    CPER_ARMV8_INFO_VALID_PHYSICAL_ADDR)
>  			printk("%sphysical fault address: 0x%016llx\n",
>  				newpfx, err_info->physical_fault_addr);
> +		trace_arm_event(proc->affinity_level, proc->mpidr, proc->midr,
> +				proc->running_state, proc->psci_state,
> +				err_info->version, err_info->type,
> +				err_info->multiple_error,
> +				err_info->validation_bits,
> +				err_info->error_info,
> +				err_info->virt_fault_addr,
> +				err_info->physical_fault_addr);

Why waste all the effort into passing each individual field. Why not
just pass the structure in and sort it out in the TP_fast_assign()?

>  		err_info += 1;
>  	}
>  
> diff --git a/drivers/ras/ras.c b/drivers/ras/ras.c
> index fb2500b..8ba5a94 100644
> --- a/drivers/ras/ras.c
> +++ b/drivers/ras/ras.c
> @@ -28,3 +28,4 @@ EXPORT_TRACEPOINT_SYMBOL_GPL(extlog_mem_event);
>  #endif
>  EXPORT_TRACEPOINT_SYMBOL_GPL(mc_event);
>  EXPORT_TRACEPOINT_SYMBOL_GPL(unknown_sec_event);
> +EXPORT_TRACEPOINT_SYMBOL_GPL(arm_event);
> diff --git a/include/ras/ras_event.h b/include/ras/ras_event.h
> index 5861b6f..eb2719a 100644
> --- a/include/ras/ras_event.h
> +++ b/include/ras/ras_event.h
> @@ -162,6 +162,73 @@ TRACE_EVENT(mc_event,
>  );
>  
>  /*
> + * ARM Processor Events Report
> + *
> + * This event is generated when hardware detects an ARM processor error
> + * has occurred. UEFI 2.6 spec section N.2.4.4.
> + */
> +TRACE_EVENT(arm_event,
> +
> +	TP_PROTO(const u8 affinity,
> +		 const u64 mpidr,
> +		 const u64 midr,
> +		 const u32 running_state,
> +		 const u32 psci_state,
> +		 const u8 version,
> +		 const u8 type,
> +		 const u16 err_count,
> +		 const u8 flags,
> +		 const u64 info,
> +		 const u64 virt_fault_addr,
> +		 const u64 phys_fault_addr),
> +
> +	TP_ARGS(affinity, mpidr, midr, running_state, psci_state,
> +		version, type, err_count, flags, info, virt_fault_addr,
> +		phys_fault_addr),
> +
> +	TP_STRUCT__entry(
> +		__field(u8, affinity)
> +		__field(u64, mpidr)
> +		__field(u64, midr)
> +		__field(u32, running_state)
> +		__field(u32, psci_state)
> +		__field(u8, version)
> +		__field(u8, type)
> +		__field(u16, err_count)
> +		__field(u8, flags)
> +		__field(u64, info)
> +		__field(u64, virt_fault_addr)
> +		__field(u64, phys_fault_addr)

The above creates a structure with lots of holes in it. Pack it better.
You want something like:

	__field(u64, mpidr)
	__field(u64, midr)
	__field(u64, info)
	__field(u64, virt_fault_addr)
	__field(u64, phys_fault_addr)
	__field(u32, running_state)
	__field(u32, psci_state)
	__field(u16, err_count)
	__field(u8, affinity)
	__field(u8, version)
	__field(u8, type)
	__field(u8, flags)

The above is a total of 54 bytes. Your original was at a minimum, 64
bytes.

-- Steve

> +	),
> +
> +	TP_fast_assign(
> +		__entry->affinity = affinity;
> +		__entry->mpidr = mpidr;
> +		__entry->midr = midr;
> +		__entry->running_state = running_state;
> +		__entry->psci_state = psci_state;
> +		__entry->version = version;
> +		__entry->type = type;
> +		__entry->err_count = err_count;
> +		__entry->flags = flags;
> +		__entry->info = info;
> +		__entry->virt_fault_addr = virt_fault_addr;
> +		__entry->phys_fault_addr = phys_fault_addr;
> +	),
> +
> +	TP_printk("affinity level: %d; MPIDR: %016llx; MIDR: %016llx; "
> +		  "running state: %d; PSCI state: %d; version: %d; type: %d; "
> +		  "error count: 0x%04x; flags: 0x%02x; info: %016llx; "
> +		  "virtual fault address: %016llx; "
> +		  "physical fault address: %016llx",
> +		  __entry->affinity, __entry->mpidr, __entry->midr,
> +		  __entry->running_state, __entry->psci_state, __entry->version,
> +		  __entry->type, __entry->err_count, __entry->flags,
> +		  __entry->info, __entry->virt_fault_addr,
> +		  __entry->phys_fault_addr)
> +);
> +
> +/*
>   * Unknown Section Report
>   *
>   * This event is generated when hardware detected a hardware