[PATCH v2 2/2] ARM: dts: rockchip: Add rk3066 MK808 board

Heiko Stuebner heiko at sntech.de
Fri Oct 7 03:01:38 PDT 2016


Am Freitag, 7. Oktober 2016, 10:29:48 CEST schrieb Shawn Lin:
> Hi Paweł ,
> 
> On 2016/10/7 1:38, Paweł Jarosz wrote:
> > MK808 is a tv stick which has rockchip rk3066 CPU inside, two usb ports
> > - host and otg, micro sd card slot and onboard wifi RK901.
> > 
> > Signed-off-by: Paweł Jarosz <paweljarosz3691 at gmail.com>
> > ---
> > 
> > Changes in v2:
> > - included Heiko sugestion.
> > 
> >  Documentation/devicetree/bindings/arm/rockchip.txt |   4 +
> >  arch/arm/boot/dts/Makefile                         |   1 +
> >  arch/arm/boot/dts/rk3066a-mk808.dts                | 184
> >  +++++++++++++++++++++ 3 files changed, 189 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/rk3066a-mk808.dts
> > 
> > diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt
> > b/Documentation/devicetree/bindings/arm/rockchip.txt index
> > 55f388f..c09595b 100644
> > --- a/Documentation/devicetree/bindings/arm/rockchip.txt
> > +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
> > @@ -17,6 +17,10 @@ Rockchip platforms device tree bindings
> > 
> >      Required root node properties:
> >        - compatible = "chipspark,rayeager-px2", "rockchip,rk3066a";
> > 
> > +- Rikomagic MK808 v1 board:
> > +    Required root node properties:
> > +      - compatible = "rikomagic,mk808", "rockchip,rk3066a";
> > +
> > 
> >  - Radxa Rock board:
> >      Required root node properties:
> >        - compatible = "radxa,rock", "rockchip,rk3188";
> > 
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index befcd26..f19cc1d 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -639,6 +639,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> > 
> >  	rk3036-kylin.dtb \
> >  	rk3066a-bqcurie2.dtb \
> >  	rk3066a-marsboard.dtb \
> > 
> > +	rk3066a-mk808.dtb \
> > 
> >  	rk3066a-rayeager.dtb \
> >  	rk3188-radxarock.dtb \
> >  	rk3228-evb.dtb \
> > 
> > diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts
> > b/arch/arm/boot/dts/rk3066a-mk808.dts new file mode 100644
> > index 0000000..2878562
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/rk3066a-mk808.dts
> > @@ -0,0 +1,184 @@
> > +/*
> > + * Copyright (c) 2016 Paweł Jarosz <paweljarosz3691 at gmail.com>
> > + *
> > + * This file is dual-licensed: you can use it either under the terms
> > + * of the GPL or the X11 license, at your option. Note that this dual
> > + * licensing only applies to this file, and not this project as a
> > + * whole.
> > + *
> > + *  a) This file is free software; you can redistribute it and/or
> > + *     modify it under the terms of the GNU General Public License as
> > + *     published by the Free Software Foundation; either version 2 of the
> > + *     License, or (at your option) any later version.
> > + *
> > + *     This file is distributed in the hope that it will be useful,
> > + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + *     GNU General Public License for more details.
> > + *
> > + * Or, alternatively,
> > + *
> > + *  b) Permission is hereby granted, free of charge, to any person
> > + *     obtaining a copy of this software and associated documentation
> > + *     files (the "Software"), to deal in the Software without
> > + *     restriction, including without limitation the rights to use,
> > + *     copy, modify, merge, publish, distribute, sublicense, and/or
> > + *     sell copies of the Software, and to permit persons to whom the
> > + *     Software is furnished to do so, subject to the following
> > + *     conditions:
> > + *
> > + *     The above copyright notice and this permission notice shall be
> > + *     included in all copies or substantial portions of the Software.
> > + *
> > + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> > + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> > + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> > + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> > + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > + *     OTHER DEALINGS IN THE SOFTWARE.
> > + */
> > +
> > +/dts-v1/;
> > +#include "rk3066a.dtsi"
> > +
> > +/ {
> > +	model = "Rikomagic MK808";
> > +	compatible = "rikomagic,mk808", "rockchip,rk3066a";
> > +
> > +	chosen {
> > +		stdout-path = "serial2:115200n8";
> > +	};
> > +
> > +	memory at 60000000 {
> > +		device_type = "memory";
> > +		reg = <0x60000000 0x40000000>;
> > +	};
> > +
> > +	gpio-leds {
> > +		compatible = "gpio-leds";
> > +
> > +		blue {
> > +			label = "mk808:blue:power";
> > +			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
> > +			default-state = "off";
> > +			linux,default-trigger = "default-on";
> > +		};
> > +	};
> > +
> > +	mmc_pwrseq: mmc-pwrseq {
> > +		compatible = "mmc-pwrseq-simple";
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&sdmmc_pwr>;
> 
> sd slot does not contain a reset pin. So the power pin should be
> enough. just add sdmmc_pwr to mmc0's pinctrl-0 and let mmc driver
> control it should be enough. Typically pwrseq is for emmc and sdio.
> We don't need a pwerseq to control power for sd slot..
> 
> But it seems sdmmc_pwr is a GPIO, but not functional port.
> So I am interesting that why MK808 board doesn't use the mmc
> controller's default power pin but chosing another gpio, so finally
> we have to add thses code for your DT.

Actually, we always model the sd-mmc pwr-pin as gpio-based regulator (see 
sdmmc-regulator for example in the rk3066a-rayeager.dts), and specifiy this 
regulator as vmmc. That way the mmc core really can control the power.


Heiko



More information about the linux-arm-kernel mailing list