[PATCH v2 5/6] arm: dts: imx7-colibri: Use pwm polarity control
Bhuvanchandra DV
bhuvanchandra.dv at toradex.com
Thu Oct 6 23:08:52 PDT 2016
On 10/06/16 12:10, Lukasz Majewski wrote:
> On Sat, 1 Oct 2016 15:42:34 +0530
> Bhuvanchandra DV <bhuvanchandra.dv at toradex.com> wrote:
>
>> Configure PWM polarity control.
>>
>> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv at toradex.com>
>> ---
>> arch/arm/boot/dts/imx7-colibri.dtsi | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi
>> b/arch/arm/boot/dts/imx7-colibri.dtsi index a9cc657..2af5e3e 100644
>> --- a/arch/arm/boot/dts/imx7-colibri.dtsi
>> +++ b/arch/arm/boot/dts/imx7-colibri.dtsi
>> @@ -43,7 +43,7 @@
>> / {
>> bl: backlight {
>> compatible = "pwm-backlight";
>> - pwms = <&pwm1 0 5000000>;
>> + pwms = <&pwm1 0 5000000 0>;
> My recommendation would be to add:
> #include <dt-bindings/pwm/pwm.h>
>
> and then define pwms as:
>
> pwms = <&pwm1 0 5000000 PWM_POLARITY_NORMAL>;
Addendum:
There is no "PWM_POLARITY_NORMAL" defined in "#include <dt-bindings/pwm/pwm.h>"
I guess it is helpful when polarity inversion is enabled.
--
Bhuvan
>
> It would be more readable
>
> Best regards,
> Łukasz Majewski
>
>> };
>>
>> reg_module_3v3: regulator-module-3v3 {
More information about the linux-arm-kernel
mailing list