[linux-sunxi] [PATCH 9/9] [DO NOT MERGE] ARM: dts: sun6i: Enable 7" LCD panel on Sinlinx SinA31s

[Icenowy Zheng]

07.10.2016, 00:06, "Chen-Yu Tsai" <wens at csie.org>:
> Sinlinx SinA31s comes with an optional 7" 1024x600 LCD panel with
> capacitive touch panel that bolts on to the board.
>
> Enable the display using a panel with close timings. This patch is more
> of a proof of concept. The LCD panel has no markings whatsoever, and
> the timings are not exactly the same, and as a result the display produces
> glitch lines sometimes.

As you say, you can use the panel of SinA33...

>
> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
> ---
>  arch/arm/boot/dts/sun6i-a31s-sina31s.dts | 30 ++++++++++++++++++++++++++++++
>  1 file changed, 30 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
> index 6ead2f5c847a..2d5cf8c9a12f 100644
> --- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
> +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
> @@ -63,6 +63,23 @@
>                          gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
>                  };
>          };
> +
> + panel: panel {
> + compatible = "avic,tm070ddh03", "simple-panel";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + panel_input: endpoint at 0 {
> + reg = <0>;
> + remote-endpoint = <&tcon0_out_lcd>;
> + };
> + };
> + };
>  };
>
>  &ehci0 {
> @@ -148,6 +165,19 @@
>          regulator-name = "vcc-gmac-phy";
>  };
>
> +&tcon0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&lcd0_rgb888_pins>;
> + status = "okay";
> +};
> +
> +&tcon0_out {
> + tcon0_out_lcd: endpoint at 0 {
> + reg = <0>;
> + remote-endpoint = <&panel_input>;
> + };
> +};
> +
>  &usbphy {
>          status = "okay";
>  };
> --
> 2.9.3
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe at googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.