[PATCH 1/8] PM / Domains: Make genpd state allocation dynamic
Lina Iyer
lina.iyer at linaro.org
Wed Oct 5 13:31:52 PDT 2016
Allow PM Domain states to be defined dynamically by the drivers. This
removes the limitation on the maximum number of states possible for a
domain.
Cc: Axel Haslam <ahaslam+renesas at baylibre.com>
Suggested-by: Ulf Hansson <ulf.hansson at linaro.org>
Signed-off-by: Lina Iyer <lina.iyer at linaro.org>
---
arch/arm/mach-imx/gpc.c | 17 ++++++++++-------
drivers/base/power/domain.c | 10 ----------
include/linux/pm_domain.h | 4 +---
3 files changed, 11 insertions(+), 20 deletions(-)
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index 0df062d..b92dad5 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -380,13 +380,6 @@ static struct pu_domain imx6q_pu_domain = {
.name = "PU",
.power_off = imx6q_pm_pu_power_off,
.power_on = imx6q_pm_pu_power_on,
- .states = {
- [0] = {
- .power_off_latency_ns = 25000,
- .power_on_latency_ns = 2000000,
- },
- },
- .state_count = 1,
},
};
@@ -430,6 +423,16 @@ static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS))
return 0;
+ imx6q_pu_domain.base.states = devm_kzalloc(dev,
+ sizeof(*imx6q_pu_domain.base.states),
+ GFP_KERNEL);
+ if (!imx6q_pu_domain.base.states)
+ return -ENOMEM;
+
+ imx6q_pu_domain.base.states[0].power_off_latency_ns = 25000;
+ imx6q_pu_domain.base.states[0].power_on_latency_ns = 2000000;
+ mx6q_pu_domain.base.state_count = 1,
+
pm_genpd_init(&imx6q_pu_domain.base, NULL, false);
return of_genpd_add_provider_onecell(dev->of_node,
&imx_gpc_onecell_data);
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index e023066..740afa9 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -1325,16 +1325,6 @@ int pm_genpd_init(struct generic_pm_domain *genpd,
genpd->dev_ops.start = pm_clk_resume;
}
- if (genpd->state_idx >= GENPD_MAX_NUM_STATES) {
- pr_warn("Initial state index out of bounds.\n");
- genpd->state_idx = GENPD_MAX_NUM_STATES - 1;
- }
-
- if (genpd->state_count > GENPD_MAX_NUM_STATES) {
- pr_warn("Limiting states to %d\n", GENPD_MAX_NUM_STATES);
- genpd->state_count = GENPD_MAX_NUM_STATES;
- }
-
/* Use only one "off" state if there were no states declared */
if (genpd->state_count == 0)
genpd->state_count = 1;
diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index a09fe5c..bd1ffb9 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h
@@ -19,8 +19,6 @@
/* Defines used for the flags field in the struct generic_pm_domain */
#define GENPD_FLAG_PM_CLK (1U << 0) /* PM domain uses PM clk */
-#define GENPD_MAX_NUM_STATES 8 /* Number of possible low power states */
-
enum gpd_status {
GPD_STATE_ACTIVE = 0, /* PM domain is active */
GPD_STATE_POWER_OFF, /* PM domain is off */
@@ -70,7 +68,7 @@ struct generic_pm_domain {
void (*detach_dev)(struct generic_pm_domain *domain,
struct device *dev);
unsigned int flags; /* Bit field of configs for genpd */
- struct genpd_power_state states[GENPD_MAX_NUM_STATES];
+ struct genpd_power_state *states;
unsigned int state_count; /* number of states */
unsigned int state_idx; /* state that genpd will go to when off */
--
2.7.4
More information about the linux-arm-kernel
mailing list