[PATCH v4 6/7] i2c: bcm2835: Support i2c-dev ioctl I2C_TIMEOUT

[Noralf Trønnes]

Use i2c_adapter->timeout for the completion timeout value. The core
default is 1 second.

Signed-off-by: Noralf Trønnes <noralf at tronnes.org>
Reviewed-by: Eric Anholt <eric at anholt.net>
---
 drivers/i2c/busses/i2c-bcm2835.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index 241e08a..d2085dd 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -53,8 +53,6 @@
 #define BCM2835_I2C_CDIV_MIN	0x0002
 #define BCM2835_I2C_CDIV_MAX	0xFFFE
 
-#define BCM2835_I2C_TIMEOUT (msecs_to_jiffies(1000))
-
 struct bcm2835_i2c_dev {
 	struct device *dev;
 	void __iomem *regs;
@@ -242,7 +240,7 @@ static int bcm2835_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
 	bcm2835_i2c_start_transfer(i2c_dev);
 
 	time_left = wait_for_completion_timeout(&i2c_dev->completion,
-						BCM2835_I2C_TIMEOUT);
+						adap->timeout);
 	if (!time_left) {
 		bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C,
 				   BCM2835_I2C_C_CLEAR);
-- 
2.8.2