[PATCH v3 0/3] Altera Cyclone Passive Serial SPI FPGA Manager
Joshua Clayton
stillcompiling at gmail.com
Tue Nov 29 17:11:02 PST 2016
This series adds an FPGA manager for Altera cyclone FPGAs
that can program them using an spi port and a couple of gpios, using
Alteras passive serial protocol.
Changes from v2:
- Merged patch 3 and 4 as suggested in review by Moritz Fischer
- Changed FPGA_MIN_DELAY from 250 to 50 ms is the time advertized by
Altera. This now works, as we don't assume it is done
Changes from v1:
- Changed the name from cyclone-spi-fpga-mgr to cyclone-ps-spi-fpga-mgr
This name change was requested by Alan Tull, to be specific about which
programming method is being employed on the fpga.
- Changed the name of the reset-gpio to config-gpio to closer match the
way the pins are described in the Altera manual
- Moved MODULE_LICENCE, _AUTHOR, and _DESCRIPTION to the bottom
- Added a bitrev8x4() function to the bitrev headers and implemented ARM
const, runtime, and ARM specific faster versions (This may end up
needing to be a standalone patch)
- Moved the bitswapping into cyclonespi_write(), as requested.
This falls short of my desired generic lsb first spi support, but is a step
in that direction.
- Fixed whitespace problems introduced during refactoring
- Replaced magic number for initial delay with a descriptive macro
- Poll the fpga to see when it is ready rather than a fixed 1 ms sleep
Joshua Clayton (3):
lib: add bitrev8x4()
doc: dt: add cyclone-spi binding document
fpga manager: Add cyclone-ps-spi driver for Altera FPGAs
.../bindings/fpga/cyclone-ps-spi-fpga-mgr.txt | 23 +++
arch/arm/include/asm/bitrev.h | 5 +
drivers/fpga/Kconfig | 7 +
drivers/fpga/Makefile | 1 +
drivers/fpga/cyclone-ps-spi.c | 176 +++++++++++++++++++++
include/linux/bitrev.h | 26 +++
6 files changed, 238 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/cyclone-ps-spi-fpga-mgr.txt
create mode 100644 drivers/fpga/cyclone-ps-spi.c
--
2.9.3
More information about the linux-arm-kernel
mailing list