[PATCH v2 0/3] TI DA850/OMAP-L138/AM18x pinconf

[David Lechner]

This series adds a new driver and DT bindings for TI DA850/OMAP-L138/AM18x
pinconf (bias pullup/pulldown).

The motivation for this series is LEGO MINDSTORMS EV3 support. It needs most,
if not all, internal pullup/down resistors disabled in order to work correctly.

v2 changes:
* s/DA8XX/DA850/ in the commit messages
* Fix `get_get` typo in pinctrl-da850-pupd.c
* Moved pin-controller at 22c00c device node in da850.dtsi

David Lechner (3):
  devicetree: bindings: pinctrl: Add binding for ti,da850-pupd
  pinctrl: New driver for TI DA850/OMAP-L138/AM18XX pinconf
  ARM: dts: da850: Add node for pullup/pulldown pinconf

 .../devicetree/bindings/pinctrl/ti,da850-pupd.txt  |  55 ++++++
 arch/arm/boot/dts/da850.dtsi                       |   5 +
 drivers/pinctrl/Kconfig                            |   9 +
 drivers/pinctrl/Makefile                           |   1 +
 drivers/pinctrl/pinctrl-da850-pupd.c               | 210 +++++++++++++++++++++
 5 files changed, 280 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/ti,da850-pupd.txt
 create mode 100644 drivers/pinctrl/pinctrl-da850-pupd.c

-- 
2.7.4