[linux-sunxi] [PATCH v6 3/5] ARM: dts: sun8i-h3: add HDMI video nodes

[Icenowy Zheng]

20.11.2016, 20:07, "Jean-Francois Moine" <moinejf at free.fr>:
> Signed-off-by: Jean-Francois Moine <moinejf at free.fr>
> ---
>  arch/arm/boot/dts/sun8i-h3.dtsi | 51 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 51 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
> index 416b825..7c6b1d5 100644
> --- a/arch/arm/boot/dts/sun8i-h3.dtsi
> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
> @@ -140,6 +140,16 @@
>                  #size-cells = <1>;
>                  ranges;
>
> + de: de-controller at 01000000 {
> + compatible = "allwinner,sun8i-h3-display-engine";
> + reg = <0x01000000 0x400000>;
> + clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_DE>;
> + clock-names = "bus", "clock";
> + resets = <&ccu RST_BUS_DE>;
> + ports = <&lcd0_p>;
> + status = "disabled";
> + };
> +
>                  dma: dma-controller at 01c02000 {
>                          compatible = "allwinner,sun8i-h3-dma";
>                          reg = <0x01c02000 0x1000>;
> @@ -149,6 +159,23 @@
>                          #dma-cells = <1>;
>                  };
>
> + lcd0: lcd-controller at 01c0c000 {
> + compatible = "allwinner,sun8i-a83t-tcon";
> + reg = <0x01c0c000 0x400>;
> + clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
> + clock-names = "bus", "clock";
> + resets = <&ccu RST_BUS_TCON0>;
> + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + lcd0_p: port {
> + lcd0_hdmi: endpoint {
> + remote-endpoint = <&hdmi_lcd0>;
> + };
> + };
> + };
> +
>                  mmc0: mmc at 01c0f000 {
>                          compatible = "allwinner,sun7i-a20-mmc";
>                          reg = <0x01c0f000 0x1000>;
> @@ -314,6 +341,11 @@
>                          clock-names = "hosc", "losc";
>                          #clock-cells = <1>;
>                          #reset-cells = <1>;
> +
> + assigned-clocks = <&ccu CLK_PLL_DE>,

Cannot get the patch built on 4.9-rc, as CLK_PLL_DE is not an exported clock.

Only CLK_DE is exported.

> + <&ccu CLK_DE>;
> + assigned-clock-rates = <864000000>,
> + <432000000>;
>                  };
>
>                  pio: pinctrl at 01c20800 {
> @@ -564,6 +596,25 @@
>                          interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>                  };
>
> + hdmi: hdmi at 01ee0000 {
> + compatible = "allwinner,sun8i-h3-hdmi";
> + reg = <0x01ee0000 0x20000>;
> + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI>,
> + <&ccu CLK_HDMI_DDC>;
> + clock-names = "bus", "clock", "ddc-clock";
> + resets = <&ccu RST_BUS_HDMI0>, <&ccu RST_BUS_HDMI1>;
> + reset-names = "hdmi0", "hdmi1";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + port at 0 { /* video */
> + reg = <0>;
> + hdmi_lcd0: endpoint {
> + remote-endpoint = <&lcd0_hdmi>;
> + };
> + };
> + };
> +
>                  rtc: rtc at 01f00000 {
>                          compatible = "allwinner,sun6i-a31-rtc";
>                          reg = <0x01f00000 0x54>;
> --
> 2.10.2
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe at googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.