[PATCH v2 5/7] IIO: add bindings for stm32 IIO timer driver
Benjamin Gaignard
benjamin.gaignard at linaro.org
Thu Nov 24 07:14:21 PST 2016
Define bindings for stm32 IIO timer
version 2:
- only keep one compatible
- add DT parameters to set lists of the triggers:
one list describe the triggers created by the device
another one give the triggers accepted by the device
Signed-off-by: Benjamin Gaignard <benjamin.gaignard at st.com>
---
.../bindings/iio/timer/stm32-iio-timer.txt | 41 ++++++++++++++++++++++
1 file changed, 41 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/timer/stm32-iio-timer.txt
diff --git a/Documentation/devicetree/bindings/iio/timer/stm32-iio-timer.txt b/Documentation/devicetree/bindings/iio/timer/stm32-iio-timer.txt
new file mode 100644
index 0000000..840b417
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/timer/stm32-iio-timer.txt
@@ -0,0 +1,41 @@
+timer IIO trigger bindings for STM32
+
+Must be a sub-node of STM32 general purpose timer driver
+
+Required parameters:
+- compatible: must be "st,stm32-iio-timer"
+- interrupts: Interrupt for this device
+ See ../interrupt-controller/st,stm32-exti.txt
+
+Optional parameters:
+- st,input-triggers-names: List of the possible input triggers for
+ the device
+- st,output-triggers-names: List of the possible output triggers for
+ the device
+
+Possible triggers are defined in include/dt-bindings/iio/timer/st,stm32-iio-timer.h
+
+Example:
+ gptimer1: gptimer1 at 40010000 {
+ compatible = "st,stm32-gptimer";
+ reg = <0x40010000 0x400>;
+ clocks = <&rcc 0 160>;
+ clock-names = "clk_int";
+
+ pwm1 at 0 {
+ compatible = "st,stm32-pwm";
+ st,pwm-num-chan = <4>;
+ st,breakinput;
+ st,complementary;
+ };
+
+ iiotimer1 at 0 {
+ compatible = "st,stm32-iio-timer";
+ interrupts = <27>;
+ st,input-triggers-names = TIM5_TRGO,
+ TIM2_TRGO,
+ TIM4_TRGO,
+ TIM3_TRGO;
+ st,output-triggers-names = TIM1_TRGO;
+ };
+ };
--
1.9.1
More information about the linux-arm-kernel
mailing list