[PATCH 18/31] ARM: dts: r8a7745: initial SoC device tree
Simon Horman
horms+renesas at verge.net.au
Wed Nov 23 12:14:25 PST 2016
From: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>
The initial R8A7745 SoC device tree including CPU0, GIC, timer, SYSC, RST,
CPG, and the required clock descriptions.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin at cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
arch/arm/boot/dts/r8a7745.dtsi | 120 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 120 insertions(+)
create mode 100644 arch/arm/boot/dts/r8a7745.dtsi
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
new file mode 100644
index 000000000000..fbf72ddd82b7
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -0,0 +1,120 @@
+/*
+ * Device Tree Source for the r8a7745 SoC
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a7745-cpg-mssr.h>
+#include <dt-bindings/power/r8a7745-sysc.h>
+
+/ {
+ compatible = "renesas,r8a7745";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0>;
+ clock-frequency = <1000000000>;
+ clocks = <&cpg CPG_CORE R8A7745_CLK_Z2>;
+ power-domains = <&sysc R8A7745_PD_CA7_CPU0>;
+ next-level-cache = <&L2_CA7>;
+ };
+
+ L2_CA7: cache-controller at 0 {
+ compatible = "cache";
+ reg = <0>;
+ cache-unified;
+ cache-level = <2>;
+ power-domains = <&sysc R8A7745_PD_CA7_SCU>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic: interrupt-controller at f1001000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0 0xf1001000 0 0x1000>,
+ <0 0xf1002000 0 0x1000>,
+ <0 0xf1004000 0 0x2000>,
+ <0 0xf1006000 0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ cpg: clock-controller at e6150000 {
+ compatible = "renesas,r8a7745-cpg-mssr";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>, <&usb_extal_clk>;
+ clock-names = "extal", "usb_extal";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
+ };
+
+ sysc: system-controller at e6180000 {
+ compatible = "renesas,r8a7745-sysc";
+ reg = <0 0xe6180000 0 0x200>;
+ #power-domain-cells = <1>;
+ };
+
+ rst: reset-controller at e6160000 {
+ compatible = "renesas,r8a7745-rst";
+ reg = <0 0xe6160000 0 0x100>;
+ };
+ };
+
+ /* External root clock */
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /* External USB clock - can be overridden by the board */
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+};
--
2.7.0.rc3.207.g0ac5344
More information about the linux-arm-kernel
mailing list