[PATCH 0/3] TI DA850/OMAP-L138/AM18x pinconf

David Lechner david at lechnology.com
Tue Nov 22 19:29:24 PST 2016


This series adds a new driver and DT bindings for TI DA850/OMAP-L138/AM18x
pinconf (bias pullup/pulldown).

The motivation for this series is LEGO MINDSTORMS EV3 support. It needs most,
if not all, internal pullup/down resistors disabled in order to work correctly.

David Lechner (3):
  devicetree: bindings: pinctrl: Add binding for ti,da850-pupd
  pinctrl: New driver for TI DA8XX/OMAP-L138/AM18XX pinconf
  ARM: dts: da850: Add node for pullup/pulldown pinconf

 .../devicetree/bindings/pinctrl/ti,da850-pupd.txt  |  55 ++++++
 arch/arm/boot/dts/da850.dtsi                       |   5 +
 drivers/pinctrl/Kconfig                            |   9 +
 drivers/pinctrl/Makefile                           |   1 +
 drivers/pinctrl/pinctrl-da850-pupd.c               | 210 +++++++++++++++++++++
 5 files changed, 280 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/ti,da850-pupd.txt
 create mode 100644 drivers/pinctrl/pinctrl-da850-pupd.c

-- 
2.7.4




More information about the linux-arm-kernel mailing list