[RFC PATCH 2/2] arm64: dts: enable the MUSB controller of Pine64 in host-only mode
Icenowy Zheng
icenowy at aosc.xyz
Tue Nov 22 08:59:02 PST 2016
A64 has a MUSB controller wired to the USB PHY 0, which is connected
to the upper USB Type-A port of Pine64.
As the port is a Type-A female port, enable it in host-only mode in the
device tree, which makes devices with USB Type-A male port can work on
this port (which is originally designed by Pine64 team).
Signed-off-by: Icenowy Zheng <icenowy at aosc.xyz>
---
Peripheral mode is also proven to work, with dr_mode changed to "peripheral"
and using a Type-A to Type-A cable.
arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index f9a11e6..cf91051 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -81,6 +81,11 @@
status = "okay";
};
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
&usbphy {
status = "okay";
};
--
2.10.2
More information about the linux-arm-kernel
mailing list