[PATCH] PM / Domains: Fix compatible for domain idle state

[Ulf Hansson]

On 3 November 2016 at 22:54, Lina Iyer <lina.iyer at linaro.org> wrote:
> Re-using idle state definition provided by arm,idle-state for domain
> idle states creates a lot of confusion and limits further evolution of
> the domain idle definition. To keep things clear and simple, define a
> idle states for domain using a new compatible "domain-idle-state".
>
> Fix existing PM domains code to look for the newly defined compatible.
>
> Cc: <devicetree at vger.kernel.org>
> Cc: Rob Herring <robh at kernel.org>
> Signed-off-by: Lina Iyer <lina.iyer at linaro.org>

Reviewed-by: Ulf Hansson <ulf.hansson at linaro.org>

Kind regards
Uffe

> ---
>  .../bindings/power/domain-idle-state.txt           | 33 ++++++++++++++++++++++
>  .../devicetree/bindings/power/power_domain.txt     |  8 +++---
>  drivers/base/power/domain.c                        |  2 +-
>  3 files changed, 38 insertions(+), 5 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/power/domain-idle-state.txt
>
> diff --git a/Documentation/devicetree/bindings/power/domain-idle-state.txt b/Documentation/devicetree/bindings/power/domain-idle-state.txt
> new file mode 100644
> index 0000000..eefc7ed
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/domain-idle-state.txt
> @@ -0,0 +1,33 @@
> +PM Domain Idle State Node:
> +
> +A domain idle state node represents the state parameters that will be used to
> +select the state when there are no active components in the domain.
> +
> +The state node has the following parameters -
> +
> +- compatible:
> +       Usage: Required
> +       Value type: <string>
> +       Definition: Must be "domain-idle-state".
> +
> +- entry-latency-us
> +       Usage: Required
> +       Value type: <prop-encoded-array>
> +       Definition: u32 value representing worst case latency in
> +                   microseconds required to enter the idle state.
> +                   The exit-latency-us duration may be guaranteed
> +                   only after entry-latency-us has passed.
> +
> +- exit-latency-us
> +       Usage: Required
> +       Value type: <prop-encoded-array>
> +       Definition: u32 value representing worst case latency
> +                   in microseconds required to exit the idle state.
> +
> +- min-residency-us
> +       Usage: Required
> +       Value type: <prop-encoded-array>
> +       Definition: u32 value representing minimum residency duration
> +                   in microseconds after which the idle state will yield
> +                   power benefits after overcoming the overhead in entering
> +i                  the idle state.
> diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt
> index e165036..723e1ad 100644
> --- a/Documentation/devicetree/bindings/power/power_domain.txt
> +++ b/Documentation/devicetree/bindings/power/power_domain.txt
> @@ -31,7 +31,7 @@ Optional properties:
>
>  - domain-idle-states : A phandle of an idle-state that shall be soaked into a
>                  generic domain power state. The idle state definitions are
> -                compatible with arm,idle-state specified in [1].
> +                compatible with domain-idle-state specified in [1].
>    The domain-idle-state property reflects the idle state of this PM domain and
>    not the idle states of the devices or sub-domains in the PM domain. Devices
>    and sub-domains have their own idle-states independent of the parent
> @@ -85,7 +85,7 @@ Example 3:
>         };
>
>         DOMAIN_RET: state at 0 {
> -               compatible = "arm,idle-state";
> +               compatible = "domain-idle-state";
>                 reg = <0x0>;
>                 entry-latency-us = <1000>;
>                 exit-latency-us = <2000>;
> @@ -93,7 +93,7 @@ Example 3:
>         };
>
>         DOMAIN_PWR_DN: state at 1 {
> -               compatible = "arm,idle-state";
> +               compatible = "domain-idle-state";
>                 reg = <0x1>;
>                 entry-latency-us = <5000>;
>                 exit-latency-us = <8000>;
> @@ -118,4 +118,4 @@ The node above defines a typical PM domain consumer device, which is located
>  inside a PM domain with index 0 of a power controller represented by a node
>  with the label "power".
>
> -[1]. Documentation/devicetree/bindings/arm/idle-states.txt
> +[1]. Documentation/devicetree/bindings/power/domain-idle-state.txt
> diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
> index 661737c..f0bc672 100644
> --- a/drivers/base/power/domain.c
> +++ b/drivers/base/power/domain.c
> @@ -2048,7 +2048,7 @@ int genpd_dev_pm_attach(struct device *dev)
>  EXPORT_SYMBOL_GPL(genpd_dev_pm_attach);
>
>  static const struct of_device_id idle_state_match[] = {
> -       { .compatible = "arm,idle-state", },
> +       { .compatible = "domain-idle-state", },
>         { }
>  };
>
> --
> 2.7.4
>