[PATCH v9 10/16] drivers: iommu: arm-smmu-v3: split probe functions into DT/generic portions

[Lorenzo Pieralisi]

Current ARM SMMUv3 probe functions intermingle HW and DT probing in the
initialization functions to detect and programme the ARM SMMU v3 driver
features. In order to allow probing the ARM SMMUv3 with other firmwares
than DT, this patch splits the ARM SMMUv3 init functions into DT and HW
specific portions so that other FW interfaces (ie ACPI) can reuse the HW
probing functions and skip the DT portion accordingly.

This patch implements no functional change, only code reshuffling.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
Reviewed-by: Tomasz Nowicki <tn at semihalf.com>
Tested-by: Hanjun Guo <hanjun.guo at linaro.org>
Tested-by: Tomasz Nowicki <tn at semihalf.com>
Cc: Will Deacon <will.deacon at arm.com>
Cc: Hanjun Guo <hanjun.guo at linaro.org>
Cc: Robin Murphy <robin.murphy at arm.com>
Cc: Joerg Roedel <joro at 8bytes.org>
---
 drivers/iommu/arm-smmu-v3.c | 43 +++++++++++++++++++++++++++----------------
 1 file changed, 27 insertions(+), 16 deletions(-)

diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index e6e1c87..2b3f9ac 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -2381,10 +2381,10 @@ static int arm_smmu_device_reset(struct arm_smmu_device *smmu, bool bypass)
 	return 0;
 }
 
-static int arm_smmu_device_probe(struct arm_smmu_device *smmu)
+static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
 {
 	u32 reg;
-	bool coherent;
+	bool coherent = smmu->features & ARM_SMMU_FEAT_COHERENCY;
 
 	/* IDR0 */
 	reg = readl_relaxed(smmu->base + ARM_SMMU_IDR0);
@@ -2436,13 +2436,9 @@ static int arm_smmu_device_probe(struct arm_smmu_device *smmu)
 		smmu->features |= ARM_SMMU_FEAT_HYP;
 
 	/*
-	 * The dma-coherent property is used in preference to the ID
+	 * The coherency feature as set by FW is used in preference to the ID
 	 * register, but warn on mismatch.
 	 */
-	coherent = of_dma_is_coherent(smmu->dev->of_node);
-	if (coherent)
-		smmu->features |= ARM_SMMU_FEAT_COHERENCY;
-
 	if (!!(reg & IDR0_COHACC) != coherent)
 		dev_warn(smmu->dev, "IDR0.COHACC overridden by dma-coherent property (%s)\n",
 			 coherent ? "true" : "false");
@@ -2563,21 +2559,35 @@ static int arm_smmu_device_probe(struct arm_smmu_device *smmu)
 	return 0;
 }
 
-static int arm_smmu_device_dt_probe(struct platform_device *pdev)
+static int arm_smmu_device_dt_probe(struct platform_device *pdev,
+				    struct arm_smmu_device *smmu)
 {
-	int irq, ret;
-	struct resource *res;
-	struct arm_smmu_device *smmu;
 	struct device *dev = &pdev->dev;
-	bool bypass = true;
 	u32 cells;
+	int ret = -EINVAL;
 
 	if (of_property_read_u32(dev->of_node, "#iommu-cells", &cells))
 		dev_err(dev, "missing #iommu-cells property\n");
 	else if (cells != 1)
 		dev_err(dev, "invalid #iommu-cells value (%d)\n", cells);
 	else
-		bypass = false;
+		ret = 0;
+
+	parse_driver_options(smmu);
+
+	if (of_dma_is_coherent(dev->of_node))
+		smmu->features |= ARM_SMMU_FEAT_COHERENCY;
+
+	return ret;
+}
+
+static int arm_smmu_device_probe(struct platform_device *pdev)
+{
+	int irq, ret;
+	struct resource *res;
+	struct arm_smmu_device *smmu;
+	struct device *dev = &pdev->dev;
+	bool bypass;
 
 	smmu = devm_kzalloc(dev, sizeof(*smmu), GFP_KERNEL);
 	if (!smmu) {
@@ -2614,10 +2624,11 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev)
 	if (irq > 0)
 		smmu->gerr_irq = irq;
 
-	parse_driver_options(smmu);
+	/* Set bypass mode according to firmware probing result */
+	bypass = !!arm_smmu_device_dt_probe(pdev, smmu);
 
 	/* Probe the h/w */
-	ret = arm_smmu_device_probe(smmu);
+	ret = arm_smmu_device_hw_probe(smmu);
 	if (ret)
 		return ret;
 
@@ -2679,7 +2690,7 @@ static struct platform_driver arm_smmu_driver = {
 		.name		= "arm-smmu-v3",
 		.of_match_table	= of_match_ptr(arm_smmu_of_match),
 	},
-	.probe	= arm_smmu_device_dt_probe,
+	.probe	= arm_smmu_device_probe,
 	.remove	= arm_smmu_device_remove,
 };
 
-- 
2.10.0