[PATCH v3 3/6] iio: adc: Add support for STM32 ADC
Jonathan Cameron
jic23 at kernel.org
Sat Nov 19 04:19:06 PST 2016
On 15/11/16 15:30, Fabrice Gasnier wrote:
> This patch adds support for STMicroelectronics STM32 MCU's analog to
> digital converter.
>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier at st.com>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.
Very nice driver!
Thanks,
Jonathan
> ---
> drivers/iio/adc/Kconfig | 10 +
> drivers/iio/adc/Makefile | 1 +
> drivers/iio/adc/stm32-adc.c | 518 ++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 529 insertions(+)
> create mode 100644 drivers/iio/adc/stm32-adc.c
>
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index ff30239..f93b990 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -432,6 +432,16 @@ config STM32_ADC_CORE
> This driver can also be built as a module. If so, the module
> will be called stm32-adc-core.
>
> +config STM32_ADC
> + tristate "STMicroelectronics STM32 adc"
> + depends on STM32_ADC_CORE
> + help
> + Say yes here to build support for STMicroelectronics stm32 Analog
> + to Digital Converter (ADC).
> +
> + This driver can also be built as a module. If so, the module
> + will be called stm32-adc.
> +
> config STX104
> tristate "Apex Embedded Systems STX104 driver"
> depends on X86 && ISA_BUS_API
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index a1e8f44..8e02a94 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -42,6 +42,7 @@ obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o
> obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
> obj-$(CONFIG_STX104) += stx104.o
> obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o
> +obj-$(CONFIG_STM32_ADC) += stm32-adc.o
> obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
> obj-$(CONFIG_TI_ADC0832) += ti-adc0832.o
> obj-$(CONFIG_TI_ADC12138) += ti-adc12138.o
> diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
> new file mode 100644
> index 0000000..5715e79
> --- /dev/null
> +++ b/drivers/iio/adc/stm32-adc.c
> @@ -0,0 +1,518 @@
> +/*
> + * This file is part of STM32 ADC driver
> + *
> + * Copyright (C) 2016, STMicroelectronics - All Rights Reserved
> + * Author: Fabrice Gasnier <fabrice.gasnier at st.com>.
> + *
> + * License type: GPLv2
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
> + * or FITNESS FOR A PARTICULAR PURPOSE.
> + * See the GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/iio/iio.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/of.h>
> +
> +#include "stm32-adc-core.h"
> +
> +/* STM32F4 - Registers for each ADC instance */
> +#define STM32F4_ADC_SR 0x00
> +#define STM32F4_ADC_CR1 0x04
> +#define STM32F4_ADC_CR2 0x08
> +#define STM32F4_ADC_SMPR1 0x0C
> +#define STM32F4_ADC_SMPR2 0x10
> +#define STM32F4_ADC_HTR 0x24
> +#define STM32F4_ADC_LTR 0x28
> +#define STM32F4_ADC_SQR1 0x2C
> +#define STM32F4_ADC_SQR2 0x30
> +#define STM32F4_ADC_SQR3 0x34
> +#define STM32F4_ADC_JSQR 0x38
> +#define STM32F4_ADC_JDR1 0x3C
> +#define STM32F4_ADC_JDR2 0x40
> +#define STM32F4_ADC_JDR3 0x44
> +#define STM32F4_ADC_JDR4 0x48
> +#define STM32F4_ADC_DR 0x4C
> +
> +/* STM32F4_ADC_SR - bit fields */
> +#define STM32F4_STRT BIT(4)
> +#define STM32F4_EOC BIT(1)
> +
> +/* STM32F4_ADC_CR1 - bit fields */
> +#define STM32F4_SCAN BIT(8)
> +#define STM32F4_EOCIE BIT(5)
> +
> +/* STM32F4_ADC_CR2 - bit fields */
> +#define STM32F4_SWSTART BIT(30)
> +#define STM32F4_EXTEN_MASK GENMASK(29, 28)
> +#define STM32F4_EOCS BIT(10)
> +#define STM32F4_ADON BIT(0)
> +
> +/* STM32F4_ADC_SQR1 - bit fields */
> +#define STM32F4_L_SHIFT 20
> +#define STM32F4_L_MASK GENMASK(23, 20)
> +
> +/* STM32F4_ADC_SQR3 - bit fields */
> +#define STM32F4_SQ1_SHIFT 0
> +#define STM32F4_SQ1_MASK GENMASK(4, 0)
> +
> +#define STM32_ADC_TIMEOUT_US 100000
> +#define STM32_ADC_TIMEOUT (msecs_to_jiffies(STM32_ADC_TIMEOUT_US / 1000))
> +
> +/**
> + * struct stm32_adc - private data of each ADC IIO instance
> + * @common: reference to ADC block common data
> + * @offset: ADC instance register offset in ADC block
> + * @completion: end of single conversion completion
> + * @buffer: data buffer
> + * @clk: clock for this adc instance
> + * @irq: interrupt for this adc instance
> + * @lock: spinlock
> + */
> +struct stm32_adc {
> + struct stm32_adc_common *common;
> + u32 offset;
> + struct completion completion;
> + u16 *buffer;
> + struct clk *clk;
> + int irq;
> + spinlock_t lock; /* interrupt lock */
> +};
> +
> +/**
> + * struct stm32_adc_chan_spec - specification of stm32 adc channel
> + * @type: IIO channel type
> + * @channel: channel number (single ended)
> + * @name: channel name (single ended)
> + */
> +struct stm32_adc_chan_spec {
> + enum iio_chan_type type;
> + int channel;
> + const char *name;
> +};
> +
> +/* Input definitions common for all STM32F4 instances */
> +static const struct stm32_adc_chan_spec stm32f4_adc123_channels[] = {
> + { IIO_VOLTAGE, 0, "in0" },
> + { IIO_VOLTAGE, 1, "in1" },
> + { IIO_VOLTAGE, 2, "in2" },
> + { IIO_VOLTAGE, 3, "in3" },
> + { IIO_VOLTAGE, 4, "in4" },
> + { IIO_VOLTAGE, 5, "in5" },
> + { IIO_VOLTAGE, 6, "in6" },
> + { IIO_VOLTAGE, 7, "in7" },
> + { IIO_VOLTAGE, 8, "in8" },
> + { IIO_VOLTAGE, 9, "in9" },
> + { IIO_VOLTAGE, 10, "in10" },
> + { IIO_VOLTAGE, 11, "in11" },
> + { IIO_VOLTAGE, 12, "in12" },
> + { IIO_VOLTAGE, 13, "in13" },
> + { IIO_VOLTAGE, 14, "in14" },
> + { IIO_VOLTAGE, 15, "in15" },
> +};
> +
> +/**
> + * STM32 ADC registers access routines
> + * @adc: stm32 adc instance
> + * @reg: reg offset in adc instance
> + *
> + * Note: All instances share same base, with 0x0, 0x100 or 0x200 offset resp.
> + * for adc1, adc2 and adc3.
> + */
> +static u32 stm32_adc_readl(struct stm32_adc *adc, u32 reg)
> +{
> + return readl_relaxed(adc->common->base + adc->offset + reg);
> +}
> +
> +static u16 stm32_adc_readw(struct stm32_adc *adc, u32 reg)
> +{
> + return readw_relaxed(adc->common->base + adc->offset + reg);
> +}
> +
> +static void stm32_adc_writel(struct stm32_adc *adc, u32 reg, u32 val)
> +{
> + writel_relaxed(val, adc->common->base + adc->offset + reg);
> +}
> +
> +static void stm32_adc_set_bits(struct stm32_adc *adc, u32 reg, u32 bits)
> +{
> + unsigned long flags;
> +
> + spin_lock_irqsave(&adc->lock, flags);
> + stm32_adc_writel(adc, reg, stm32_adc_readl(adc, reg) | bits);
> + spin_unlock_irqrestore(&adc->lock, flags);
> +}
> +
> +static void stm32_adc_clr_bits(struct stm32_adc *adc, u32 reg, u32 bits)
> +{
> + unsigned long flags;
> +
> + spin_lock_irqsave(&adc->lock, flags);
> + stm32_adc_writel(adc, reg, stm32_adc_readl(adc, reg) & ~bits);
> + spin_unlock_irqrestore(&adc->lock, flags);
> +}
> +
> +/**
> + * stm32_adc_conv_irq_enable() - Enable end of conversion interrupt
> + * @adc: stm32 adc instance
> + */
> +static void stm32_adc_conv_irq_enable(struct stm32_adc *adc)
> +{
> + stm32_adc_set_bits(adc, STM32F4_ADC_CR1, STM32F4_EOCIE);
> +};
> +
> +/**
> + * stm32_adc_conv_irq_disable() - Disable end of conversion interrupt
> + * @adc: stm32 adc instance
> + */
> +static void stm32_adc_conv_irq_disable(struct stm32_adc *adc)
> +{
> + stm32_adc_clr_bits(adc, STM32F4_ADC_CR1, STM32F4_EOCIE);
> +}
> +
> +/**
> + * stm32_adc_start_conv() - Start conversions for regular channels.
> + * @adc: stm32 adc instance
> + */
> +static void stm32_adc_start_conv(struct stm32_adc *adc)
> +{
> + stm32_adc_set_bits(adc, STM32F4_ADC_CR1, STM32F4_SCAN);
> + stm32_adc_set_bits(adc, STM32F4_ADC_CR2, STM32F4_EOCS | STM32F4_ADON);
> +
> + /* Wait for Power-up time (tSTAB from datasheet) */
> + usleep_range(2, 3);
> +
> + /* Software start ? (e.g. trigger detection disabled ?) */
> + if (!(stm32_adc_readl(adc, STM32F4_ADC_CR2) & STM32F4_EXTEN_MASK))
> + stm32_adc_set_bits(adc, STM32F4_ADC_CR2, STM32F4_SWSTART);
> +}
> +
> +static void stm32_adc_stop_conv(struct stm32_adc *adc)
> +{
> + stm32_adc_clr_bits(adc, STM32F4_ADC_CR2, STM32F4_EXTEN_MASK);
> + stm32_adc_clr_bits(adc, STM32F4_ADC_SR, STM32F4_STRT);
> +
> + stm32_adc_clr_bits(adc, STM32F4_ADC_CR1, STM32F4_SCAN);
> + stm32_adc_clr_bits(adc, STM32F4_ADC_CR2, STM32F4_ADON);
> +}
> +
> +/**
> + * stm32_adc_single_conv() - Performs a single conversion
> + * @indio_dev: IIO device
> + * @chan: IIO channel
> + * @res: conversion result
> + *
> + * The function performs a single conversion on a given channel:
> + * - Program sequencer with one channel (e.g. in SQ1 with len = 1)
> + * - Use SW trigger
> + * - Start conversion, then wait for interrupt completion.
> + */
> +static int stm32_adc_single_conv(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan,
> + int *res)
> +{
> + struct stm32_adc *adc = iio_priv(indio_dev);
> + long timeout;
> + u32 val;
> + u16 result;
> + int ret;
> +
> + reinit_completion(&adc->completion);
> +
> + adc->buffer = &result;
> +
> + /* Program chan number in regular sequence */
> + val = stm32_adc_readl(adc, STM32F4_ADC_SQR3);
> + val &= ~STM32F4_SQ1_MASK;
> + val |= chan->channel << STM32F4_SQ1_SHIFT;
> + stm32_adc_writel(adc, STM32F4_ADC_SQR3, val);
> +
> + /* Set regular sequence len (0 for 1 conversion) */
> + stm32_adc_clr_bits(adc, STM32F4_ADC_SQR1, STM32F4_L_MASK);
> +
> + /* Trigger detection disabled (conversion can be launched in SW) */
> + stm32_adc_clr_bits(adc, STM32F4_ADC_CR2, STM32F4_EXTEN_MASK);
> +
> + stm32_adc_conv_irq_enable(adc);
> +
> + stm32_adc_start_conv(adc);
> +
> + timeout = wait_for_completion_interruptible_timeout(
> + &adc->completion, STM32_ADC_TIMEOUT);
> + if (timeout == 0) {
> + ret = -ETIMEDOUT;
> + } else if (timeout < 0) {
> + ret = timeout;
> + } else {
> + *res = result;
> + ret = IIO_VAL_INT;
> + }
> +
> + stm32_adc_stop_conv(adc);
> +
> + stm32_adc_conv_irq_disable(adc);
> +
> + return ret;
> +}
> +
> +static int stm32_adc_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long mask)
> +{
> + struct stm32_adc *adc = iio_priv(indio_dev);
> + int ret;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + ret = iio_device_claim_direct_mode(indio_dev);
> + if (ret)
> + return ret;
> + if (chan->type == IIO_VOLTAGE)
> + ret = stm32_adc_single_conv(indio_dev, chan, val);
> + else
> + ret = -EINVAL;
> + iio_device_release_direct_mode(indio_dev);
> + return ret;
> +
> + case IIO_CHAN_INFO_SCALE:
> + *val = adc->common->vref_mv;
> + *val2 = chan->scan_type.realbits;
> + return IIO_VAL_FRACTIONAL_LOG2;
> +
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static irqreturn_t stm32_adc_isr(int irq, void *data)
> +{
> + struct stm32_adc *adc = data;
> + u32 status = stm32_adc_readl(adc, STM32F4_ADC_SR);
> +
> + if (status & STM32F4_EOC) {
> + *adc->buffer = stm32_adc_readw(adc, STM32F4_ADC_DR);
> + complete(&adc->completion);
> + return IRQ_HANDLED;
> + }
> +
> + return IRQ_NONE;
> +}
> +
> +static int stm32_adc_of_xlate(struct iio_dev *indio_dev,
> + const struct of_phandle_args *iiospec)
> +{
> + int i;
> +
> + for (i = 0; i < indio_dev->num_channels; i++)
> + if (indio_dev->channels[i].channel == iiospec->args[0])
> + return i;
> +
> + return -EINVAL;
> +}
> +
> +/**
> + * stm32_adc_debugfs_reg_access - read or write register value
> + *
> + * To read a value from an ADC register:
> + * echo [ADC reg offset] > direct_reg_access
> + * cat direct_reg_access
> + *
> + * To write a value in a ADC register:
> + * echo [ADC_reg_offset] [value] > direct_reg_access
> + */
> +static int stm32_adc_debugfs_reg_access(struct iio_dev *indio_dev,
> + unsigned reg, unsigned writeval,
> + unsigned *readval)
> +{
> + struct stm32_adc *adc = iio_priv(indio_dev);
> +
> + if (!readval)
> + stm32_adc_writel(adc, reg, writeval);
> + else
> + *readval = stm32_adc_readl(adc, reg);
> +
> + return 0;
> +}
> +
> +static const struct iio_info stm32_adc_iio_info = {
> + .read_raw = stm32_adc_read_raw,
> + .debugfs_reg_access = stm32_adc_debugfs_reg_access,
> + .of_xlate = stm32_adc_of_xlate,
> + .driver_module = THIS_MODULE,
> +};
> +
> +static void stm32_adc_chan_init_one(struct iio_dev *indio_dev,
> + struct iio_chan_spec *chan,
> + const struct stm32_adc_chan_spec *channel,
> + int scan_index)
> +{
> + chan->type = channel->type;
> + chan->channel = channel->channel;
> + chan->datasheet_name = channel->name;
> + chan->scan_index = scan_index;
> + chan->indexed = 1;
> + chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
> + chan->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE);
> + chan->scan_type.sign = 'u';
> + chan->scan_type.realbits = 12;
> + chan->scan_type.storagebits = 16;
> +}
> +
> +static int stm32_adc_chan_of_init(struct iio_dev *indio_dev)
> +{
> + struct device_node *node = indio_dev->dev.of_node;
> + struct property *prop;
> + const __be32 *cur;
> + struct iio_chan_spec *channels;
> + int scan_index = 0, num_channels;
> + u32 val;
> +
> + num_channels = of_property_count_u32_elems(node, "st,adc-channels");
> + if (num_channels < 0 ||
> + num_channels >= ARRAY_SIZE(stm32f4_adc123_channels)) {
> + dev_err(&indio_dev->dev, "Bad st,adc-channels?\n");
> + return num_channels < 0 ? num_channels : -EINVAL;
> + }
> +
> + channels = devm_kcalloc(&indio_dev->dev, num_channels,
> + sizeof(struct iio_chan_spec), GFP_KERNEL);
> + if (!channels)
> + return -ENOMEM;
> +
> + of_property_for_each_u32(node, "st,adc-channels", prop, cur, val) {
> + if (val >= ARRAY_SIZE(stm32f4_adc123_channels)) {
> + dev_err(&indio_dev->dev, "Invalid channel %d\n", val);
> + return -EINVAL;
> + }
> + stm32_adc_chan_init_one(indio_dev, &channels[scan_index],
> + &stm32f4_adc123_channels[val],
> + scan_index);
> + scan_index++;
> + }
> +
> + indio_dev->num_channels = scan_index;
> + indio_dev->channels = channels;
> +
> + return 0;
> +}
> +
> +static int stm32_adc_probe(struct platform_device *pdev)
> +{
> + struct iio_dev *indio_dev;
> + struct stm32_adc *adc;
> + int ret;
> +
> + if (!pdev->dev.of_node)
> + return -ENODEV;
> +
> + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + adc = iio_priv(indio_dev);
> + adc->common = dev_get_drvdata(pdev->dev.parent);
> + spin_lock_init(&adc->lock);
> + init_completion(&adc->completion);
> +
> + indio_dev->name = dev_name(&pdev->dev);
> + indio_dev->dev.parent = &pdev->dev;
> + indio_dev->dev.of_node = pdev->dev.of_node;
> + indio_dev->info = &stm32_adc_iio_info;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> +
> + platform_set_drvdata(pdev, adc);
> +
> + ret = of_property_read_u32(pdev->dev.of_node, "reg", &adc->offset);
> + if (ret != 0) {
> + dev_err(&pdev->dev, "missing reg property\n");
> + return -EINVAL;
> + }
> +
> + adc->irq = platform_get_irq(pdev, 0);
> + if (adc->irq < 0) {
> + dev_err(&pdev->dev, "failed to get irq\n");
> + return adc->irq;
> + }
> +
> + ret = devm_request_irq(&pdev->dev, adc->irq, stm32_adc_isr,
> + 0, pdev->name, adc);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to request IRQ\n");
> + return ret;
> + }
> +
> + adc->clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(adc->clk)) {
> + dev_err(&pdev->dev, "Can't get clock\n");
> + return PTR_ERR(adc->clk);
> + }
> +
> + ret = clk_prepare_enable(adc->clk);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "clk enable failed\n");
> + return ret;
> + }
> +
> + ret = stm32_adc_chan_of_init(indio_dev);
> + if (ret < 0)
> + goto err_clk_disable;
> +
> + ret = iio_device_register(indio_dev);
> + if (ret) {
> + dev_err(&pdev->dev, "iio dev register failed\n");
> + goto err_clk_disable;
> + }
> +
> + return 0;
> +
> +err_clk_disable:
> + clk_disable_unprepare(adc->clk);
> +
> + return ret;
> +}
> +
> +static int stm32_adc_remove(struct platform_device *pdev)
> +{
> + struct stm32_adc *adc = platform_get_drvdata(pdev);
> + struct iio_dev *indio_dev = iio_priv_to_dev(adc);
> +
> + iio_device_unregister(indio_dev);
> + clk_disable_unprepare(adc->clk);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id stm32_adc_of_match[] = {
> + { .compatible = "st,stm32f4-adc" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, stm32_adc_of_match);
> +
> +static struct platform_driver stm32_adc_driver = {
> + .probe = stm32_adc_probe,
> + .remove = stm32_adc_remove,
> + .driver = {
> + .name = "stm32-adc",
> + .of_match_table = stm32_adc_of_match,
> + },
> +};
> +module_platform_driver(stm32_adc_driver);
> +
> +MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier at st.com>");
> +MODULE_DESCRIPTION("STMicroelectronics STM32 ADC IIO driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:stm32-adc");
>
More information about the linux-arm-kernel
mailing list