[PATCHv3 6/6] arm64: Add support for CONFIG_DEBUG_VIRTUAL
Mark Rutland
mark.rutland at arm.com
Fri Nov 18 09:53:28 PST 2016
Hi,
On Thu, Nov 17, 2016 at 05:16:56PM -0800, Laura Abbott wrote:
>
> x86 has an option CONFIG_DEBUG_VIRTUAL to do additional checks
> on virt_to_phys calls. The goal is to catch users who are calling
> virt_to_phys on non-linear addresses immediately. This inclues callers
> using virt_to_phys on image addresses instead of __pa_symbol. As features
> such as CONFIG_VMAP_STACK get enabled for arm64, this becomes increasingly
> important. Add checks to catch bad virt_to_phys usage.
>
> Signed-off-by: Laura Abbott <labbott at redhat.com>
> ---
> v3: Make use of __pa_symbol required via debug checks. It's a WARN for now but
> it can become a BUG after wider testing. __virt_to_phys is
> now for linear addresses only. Dropped the VM_BUG_ON from Catalin's suggested
> version from the nodebug version since having that in the nodebug version
> essentially made them the debug version. Changed to KERNEL_START/KERNEL_END
> for bounds checking. More comments.
I gave this a go with DEBUG_VIRTUAL && KASAN_INLINE selected, and the
kernel dies somewhere before bringing up earlycon. :(
I mentioned some possible reasons in a reply to pastch 5, and I have
some more comments below.
[...]
> -#define __virt_to_phys(x) ({ \
> +
> +
> +/*
> + * This is for translation from the standard linear map to physical addresses.
> + * It is not to be used for kernel symbols.
> + */
> +#define __virt_to_phys_nodebug(x) ({ \
> phys_addr_t __x = (phys_addr_t)(x); \
> - __x & BIT(VA_BITS - 1) ? (__x & ~PAGE_OFFSET) + PHYS_OFFSET : \
> - (__x - kimage_voffset); })
> + ((__x & ~PAGE_OFFSET) + PHYS_OFFSET); \
> +})
Given the KASAN failure, and the strong possibility that there's even
more stuff lurking in common code, I think we should retain the logic to
handle kernel image addresses for the timebeing (as x86 does). Once
we've merged DEBUG_VIRTUAL, it will be easier to track those down.
Catalin, I think you suggested removing that logic; are you happy for it
to be restored?
See below for a refactoring that retains this logic.
[...]
> +/*
> + * This is for translation from a kernel image/symbol address to a
> + * physical address.
> + */
> +#define __pa_symbol_nodebug(x) ({ \
> + phys_addr_t __x = (phys_addr_t)(x); \
> + (__x - kimage_voffset); \
> +})
We can avoid duplication here (and in physaddr.c) if we factor the logic
into helpers, e.g.
/*
* The linear kernel range starts in the middle of the virtual adddress
* space. Testing the top bit for the start of the region is a
* sufficient check.
*/
#define __is_lm_address(addr) (!!((addr) & BIT(VA_BITS - 1)))
#define __lm_to_phys(addr) (((addr) & ~PAGE_OFFSET) + PHYS_OFFSET)
#define __kimg_to_phys(addr) ((addr) - kimage_voffset)
#define __virt_to_phys_nodebug(x) ({ \
phys_addr_t __x = (phys_addr_t)(x); \
__is_lm_address(__x) ? __lm_to_phys(__x) : \
__kimg_to_phys(__x); \
})
#define __pa_symbol_nodebug(x) __kimg_to_phys((phys_addr_t)(x))
> +#ifdef CONFIG_DEBUG_VIRTUAL
> +extern unsigned long __virt_to_phys(unsigned long x);
> +extern unsigned long __phys_addr_symbol(unsigned long x);
It would be better for both of these to return phys_addr_t.
[...]
> diff --git a/arch/arm64/mm/physaddr.c b/arch/arm64/mm/physaddr.c
> new file mode 100644
> index 0000000..f8eb781
> --- /dev/null
> +++ b/arch/arm64/mm/physaddr.c
> @@ -0,0 +1,39 @@
> +#include <linux/mm.h>
> +
> +#include <asm/memory.h>
We also need:
#include <linux/bug.h>
#include <linux/export.h>
#include <linux/types.h>
#include <linux/mmdebug.h>
> +unsigned long __virt_to_phys(unsigned long x)
> +{
> + phys_addr_t __x = (phys_addr_t)x;
> +
> + if (__x & BIT(VA_BITS - 1)) {
> + /*
> + * The linear kernel range starts in the middle of the virtual
> + * adddress space. Testing the top bit for the start of the
> + * region is a sufficient check.
> + */
> + return (__x & ~PAGE_OFFSET) + PHYS_OFFSET;
> + } else {
> + /*
> + * __virt_to_phys should not be used on symbol addresses.
> + * This should be changed to a BUG once all basic bad uses have
> + * been cleaned up.
> + */
> + WARN(1, "Do not use virt_to_phys on symbol addresses");
> + return __phys_addr_symbol(x);
> + }
> +}
> +EXPORT_SYMBOL(__virt_to_phys);
I think this would be better something like:
phys_addr_t __virt_to_phys(unsigned long x)
{
WARN(!__is_lm_address(x),
"virt_to_phys() used for non-linear address: %pK\n",
(void*)x);
return __virt_to_phys_nodebug(x);
}
EXPORT_SYMBOL(__virt_to_phys);
> +
> +unsigned long __phys_addr_symbol(unsigned long x)
> +{
> + phys_addr_t __x = (phys_addr_t)x;
> +
> + /*
> + * This is bounds checking against the kernel image only.
> + * __pa_symbol should only be used on kernel symbol addresses.
> + */
> + VIRTUAL_BUG_ON(x < (unsigned long) KERNEL_START || x > (unsigned long) KERNEL_END);
> + return (__x - kimage_voffset);
> +}
> +EXPORT_SYMBOL(__phys_addr_symbol);
Similarly:
phys_addr_t __phys_addr_symbol(unsigned long x)
{
/*
* This is bounds checking against the kernel image only.
* __pa_symbol should only be used on kernel symbol addresses.
*/
VIRTUAL_BUG_ON(x < (unsigned long) KERNEL_START ||
x > (unsigned long) KERNEL_END);
return __pa_symbol_nodebug(x);
}
EXPORT_SYMBOL(__phys_addr_symbol);
Thanks,
Mark.
More information about the linux-arm-kernel
mailing list