[GIT PULL 9/10] arm64: tegra: Device tree changes for v4.10-rc1

Thierry Reding thierry.reding at gmail.com
Fri Nov 18 08:17:18 PST 2016


Hi ARM SoC maintainers,

The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm64-dt

for you to fetch changes up to cc13b4fa4ac780cec6c21b64a39ab2950e95e8f6:

  arm64: tegra: Add NVIDIA P2771 board support (2016-11-18 14:35:53 +0100)

Thanks,
Thierry

----------------------------------------------------------------
arm64: tegra: Device tree changes for v4.10-rc1

This adds initial support for Tegra186, the P3310 processor module as
well as the P2771 development board. Not much is functional, but there
is enough to boot to an initial ramdisk with debug serial output.

----------------------------------------------------------------
Dan Carpenter (1):
      mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()

Joseph Lo (6):
      soc/tegra: Add Tegra186 support
      dt-bindings: mailbox: Add Tegra HSP binding
      dt-bindings: firmware: Add bindings for Tegra BPMP
      arm64: tegra: Add Tegra186 support
      arm64: tegra: Add NVIDIA P3310 processor module support
      arm64: tegra: Add NVIDIA P2771 board support

Stephen Warren (2):
      dt-bindings: Add power domains to Tegra BPMP firmware
      dt-bindings: firmware: Allow child nodes inside the Tegra BPMP

Thierry Reding (12):
      Merge branch 'for-4.10/soc' into for-4.10/mailbox
      mailbox: Add Tegra HSP driver
      Merge branch 'for-4.10/mailbox' into for-4.10/firmware
      firmware: tegra: Add IVC library
      firmware: tegra: Add BPMP support
      Merge branch 'for-4.10/firmware' into for-4.10/arm64/dt
      arm64: tegra: Add CPU nodes for Tegra186
      arm64: tegra: Add serial ports on Tegra186
      arm64: tegra: Add I2C controllers on Tegra186
      arm64: tegra: Add SDHCI controllers on Tegra186
      arm64: tegra: Add GPIO controllers on Tegra186
      arm64: tegra: Enable PSCI on P3310

 .../bindings/firmware/nvidia,tegra186-bpmp.txt     |  108 ++
 .../bindings/mailbox/nvidia,tegra186-hsp.txt       |   52 +
 arch/arm64/boot/dts/nvidia/Makefile                |    1 +
 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts |    8 +
 arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi     |   64 +
 arch/arm64/boot/dts/nvidia/tegra186.dtsi           |  402 +++++
 drivers/firmware/Kconfig                           |    1 +
 drivers/firmware/Makefile                          |    1 +
 drivers/firmware/tegra/Kconfig                     |   25 +
 drivers/firmware/tegra/Makefile                    |    2 +
 drivers/firmware/tegra/bpmp.c                      |  868 +++++++++++
 drivers/firmware/tegra/ivc.c                       |  695 +++++++++
 drivers/mailbox/Kconfig                            |    9 +
 drivers/mailbox/Makefile                           |    2 +
 drivers/mailbox/tegra-hsp.c                        |  479 ++++++
 drivers/soc/tegra/Kconfig                          |   14 +
 include/dt-bindings/clock/tegra186-clock.h         |  940 ++++++++++++
 include/dt-bindings/mailbox/tegra186-hsp.h         |   24 +
 include/dt-bindings/power/tegra186-powergate.h     |   39 +
 include/dt-bindings/reset/tegra186-reset.h         |  217 +++
 include/soc/tegra/bpmp-abi.h                       | 1601 ++++++++++++++++++++
 include/soc/tegra/bpmp.h                           |  141 ++
 include/soc/tegra/ivc.h                            |  109 ++
 23 files changed, 5802 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
 create mode 100644 Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra186.dtsi
 create mode 100644 drivers/firmware/tegra/Kconfig
 create mode 100644 drivers/firmware/tegra/Makefile
 create mode 100644 drivers/firmware/tegra/bpmp.c
 create mode 100644 drivers/firmware/tegra/ivc.c
 create mode 100644 drivers/mailbox/tegra-hsp.c
 create mode 100644 include/dt-bindings/clock/tegra186-clock.h
 create mode 100644 include/dt-bindings/mailbox/tegra186-hsp.h
 create mode 100644 include/dt-bindings/power/tegra186-powergate.h
 create mode 100644 include/dt-bindings/reset/tegra186-reset.h
 create mode 100644 include/soc/tegra/bpmp-abi.h
 create mode 100644 include/soc/tegra/bpmp.h
 create mode 100644 include/soc/tegra/ivc.h



More information about the linux-arm-kernel mailing list