[RFC 3/6] Documentation: dt: add bindings for ti bb2d
Robert Nelson
robertcnelson at gmail.com
Thu Nov 17 18:44:33 PST 2016
From: Gowtham Tammana <g-tammana at ti.com>
Add documentation for device tree bindings description for
2D GPU blitter module present in Texas Instruments family of SoCs.
Signed-off-by: Gowtham Tammana <g-tammana at ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
---
Documentation/devicetree/bindings/gpu/ti-bb2d.txt | 27 +++++++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpu/ti-bb2d.txt
diff --git a/Documentation/devicetree/bindings/gpu/ti-bb2d.txt b/Documentation/devicetree/bindings/gpu/ti-bb2d.txt
new file mode 100644
index 0000000..af47488
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/ti-bb2d.txt
@@ -0,0 +1,27 @@
+* Texas Instruments BB2D blitter module
+
+This binding describes the 2D BitBlit (BB2D) graphics accelerator
+subsystem based on the GC320 core from Vivante Corporation available
+in Texas Instruments SoCs.
+
+Required properties:
+ - compatible: value should take the following format:
+ "ti,<soc>-bb2d", "vivante,<gpuversion>"
+ accepted values:
+ (a) "ti,dra7-bb2d", "vivante,gc320" for TI DRA7xx / AM57x
+
+ - reg : base address and length of BB2D IP registers
+ - interrupts : BB2D interrupt line number
+ - ti,hwmods : name of the hwmod associated with BB2D module
+ - clocks : handle to BB2D functional clock
+ - clock-names : fclk
+
+Example for DRA7x SoC:
+ bb2d: bb2d at 59000000 {
+ compatible = "ti,dra7-bb2d", "vivante,gc320";
+ reg = <0x59000000 0x0700>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "bb2d";
+ clocks = <&dpll_core_h24x2_ck>;
+ clock-names = "fclk";
+ };
--
2.10.2
More information about the linux-arm-kernel
mailing list