[PATCH] ARM: dts: qcom: Add apq8064 CoreSight components
Georgi Djakov
georgi.djakov at linaro.org
Thu Nov 17 07:36:09 PST 2016
From: "Ivan T. Ivanov" <ivan.ivanov at linaro.org>
Add initial set of CoreSight components found on Qualcomm's
8064 chipset.
Signed-off-by: Ivan T. Ivanov <ivan.ivanov at linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov at linaro.org>
---
arch/arm/boot/dts/qcom-apq8064-coresight.dtsi | 196 ++++++++++++++++++++++++++
arch/arm/boot/dts/qcom-apq8064.dtsi | 11 +-
2 files changed, 203 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom-apq8064-coresight.dtsi
diff --git a/arch/arm/boot/dts/qcom-apq8064-coresight.dtsi b/arch/arm/boot/dts/qcom-apq8064-coresight.dtsi
new file mode 100644
index 000000000000..9395fddb1bf0
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-coresight.dtsi
@@ -0,0 +1,196 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+&soc {
+
+ etb at 1a01000 {
+ compatible = "coresight-etb10", "arm,primecell";
+ reg = <0x1a01000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ etb_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out0>;
+ };
+ };
+ };
+
+ tpiu at 1a03000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0x1a03000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ tpiu_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out1>;
+ };
+ };
+ };
+
+ replicator {
+ compatible = "arm,coresight-replicator";
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ replicator_out0: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
+ };
+ port at 1 {
+ reg = <1>;
+ replicator_out1: endpoint {
+ remote-endpoint = <&tpiu_in>;
+ };
+ };
+ port at 2 {
+ reg = <0>;
+ replicator_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&funnel_out>;
+ };
+ };
+ };
+ };
+
+ funnel at 1a04000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0x1a04000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * Not described input ports:
+ * 2 - connected to STM component
+ * 3 - not-connected
+ * 6 - not-connected
+ * 7 - not-connected
+ */
+ port at 0 {
+ reg = <0>;
+ funnel_in0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm0_out>;
+ };
+ };
+ port at 1 {
+ reg = <1>;
+ funnel_in1: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm1_out>;
+ };
+ };
+ port at 4 {
+ reg = <4>;
+ funnel_in4: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm2_out>;
+ };
+ };
+ port at 5 {
+ reg = <5>;
+ funnel_in5: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm3_out>;
+ };
+ };
+ port at 8 {
+ reg = <0>;
+ funnel_out: endpoint {
+ remote-endpoint = <&replicator_in>;
+ };
+ };
+ };
+ };
+
+ etm at 1a1c000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1c000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU0>;
+
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel_in0>;
+ };
+ };
+ };
+
+ etm at 1a1d000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1d000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU1>;
+
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel_in1>;
+ };
+ };
+ };
+
+ etm at 1a1e000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1e000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU2>;
+
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel_in4>;
+ };
+ };
+ };
+
+ etm at 1a1f000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1f000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU3>;
+
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel_in5>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 268bd470c865..18469c632e2f 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -4,6 +4,7 @@
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -27,7 +28,7 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu at 0 {
+ CPU0: cpu at 0 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -38,7 +39,7 @@
cpu-idle-states = <&CPU_SPC>;
};
- cpu at 1 {
+ CPU1: cpu at 1 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -49,7 +50,7 @@
cpu-idle-states = <&CPU_SPC>;
};
- cpu at 2 {
+ CPU2: cpu at 2 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -60,7 +61,7 @@
cpu-idle-states = <&CPU_SPC>;
};
- cpu at 3 {
+ CPU3: cpu at 3 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -1418,4 +1419,6 @@
};
};
};
+
+#include "qcom-apq8064-coresight.dtsi"
#include "qcom-apq8064-pins.dtsi"
More information about the linux-arm-kernel
mailing list