[PATCH 2/2] arm64: dts: updated sata node on ls1046a dts

[yuantian.tang at nxp.com]

From: Tang Yuantian <Yuantian.Tang at nxp.com>

On ls1046a soc, sata ecc should be disabled. So added sata ecc
register address so that driver can get this information.

Signed-off-by: Tang Yuantian <yuantian.tang at nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 38806ca..88aaaf1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -507,7 +507,9 @@
 
 		sata: sata at 3200000 {
 			compatible = "fsl,ls1046a-ahci";
-			reg = <0x0 0x3200000 0x0 0x10000>;
+			reg = <0x0 0x3200000 0x0 0x10000>,
+			    <0x0 0x20140520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
 			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 1>;
 		};
-- 
2.1.0.27.g96db324