[BUG] Suspicious RCU usage: NFS client - 4.9-rc4

Russell King - ARM Linux linux at armlinux.org.uk
Tue Nov 15 07:07:07 PST 2016


While booting two of my machines, I noticed this splat on the console.
Not sure if this is due to a RCU change or NFS change, so adding folk
on both sides.

===============================
[ INFO: suspicious RCU usage. ]
4.9.0-rc4+ #2050 Not tainted
-------------------------------
net/sunrpc/clnt.c:2773 suspicious rcu_dereference_check() usage!

other info that might help us debug this:


rcu_scheduler_active = 1, debug_locks = 0
1 lock held by mount.nfs/1499:
 #0: 
 (
&(&nn->nfs_client_lock)->rlock
){+.+...}
, at: 
[<c026c6d4>] nfs_get_client+0xe8/0x580

stack backtrace:
CPU: 1 PID: 1499 Comm: mount.nfs Not tainted 4.9.0-rc4+ #2050
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Backtrace: 
[<c0013b84>] (dump_backtrace) from [<c0013dc4>] (show_stack+0x18/0x1c)
 r6:60010013 r5:ffffffff r4:00000000 r3:00000000
[<c0013dac>] (show_stack) from [<c035d300>] (dump_stack+0xa4/0xdc)
[<c035d25c>] (dump_stack) from [<c008093c>] (lockdep_rcu_suspicious+0xbc/0x11c)
 r6:00000ad5 r5:c08f4078 r4:ee58a4c0 r3:ee58a4c0
[<c0080880>] (lockdep_rcu_suspicious) from [<c0721ba4>] (rpc_clnt_xprt_switch_has_addr+0x134/0x15c)
 r7:ef27dd80 r6:c0ae3972 r5:eeb5a110 r4:ee930400
[<c0721a70>] (rpc_clnt_xprt_switch_has_addr) from [<c026c814>] (nfs_get_client+0x228/0x580)
 r6:ef27ddd0 r5:eeb5a110 r4:00000000
[<c026c5ec>] (nfs_get_client) from [<c026cc20>] (nfs_create_server+0xb4/0x3d4)
 r10:edaebe6c r9:c0a84d54 r8:edaebd30 r7:edf7b480 r6:00000000 r5:ed50a000
 r4:eeb5a000
[<c026cb6c>] (nfs_create_server) from [<c028a2f8>] (nfs3_create_server+0x10/0x28)
 r10:00000000 r9:edbea200 r8:c0a84d54 r7:edaebe6c r6:00000000 r5:00000001
 r4:eeb5a000
[<c028a2e8>] (nfs3_create_server) from [<c02792a0>] (nfs_try_mount+0x188/0x280)
 r4:eeb5a000 r3:c028a2e8
[<c0279118>] (nfs_try_mount) from [<c027b28c>] (nfs_fs_mount+0x420/0x8c0)
 r10:00000000 r9:00000400 r8:edbea200 r7:edbea200 r6:c0a84d54 r5:edbea206
 r4:eeb5a000
[<c027ae6c>] (nfs_fs_mount) from [<c016eaf4>] (mount_fs+0x1c/0xa8)
 r10:ed4f5000 r9:edbea340 r8:c0a82204 r7:c019091c r6:c0a82204 r5:edbea200
 r4:ed8a3700
[<c016ead8>] (mount_fs) from [<c018d6d0>] (vfs_kern_mount+0x5c/0x138)
 r6:00000000 r5:edbea200 r4:ed8a3700
[<c018d674>] (vfs_kern_mount) from [<c019091c>] (do_mount+0x164/0xc58)
 r10:c0191774 r8:edbea200 r7:00000020 r6:ed4f5000 r5:c0a82204 r4:00000000
[<c01907b8>] (do_mount) from [<c0191774>] (SyS_mount+0x7c/0xa4)
 r10:00000000 r9:edaea000 r8:0078c0f8 r7:00000000 r6:ed4f5000 r5:edbea200
 r4:edbea340
[<c01916f8>] (SyS_mount) from [<c000fd60>] (ret_fast_syscall+0x0/0x1c)
 r8:c000ff04 r7:00000015 r6:0078dd50 r5:bed2bad0 r4:007968a8


-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.



More information about the linux-arm-kernel mailing list