[PATCH v2 1/3] ARM: dts: sun7i: bananapi-m1-plus: Enable USB PHY for USB host support

[Chen-Yu Tsai]

The 2 USB host ports are directly tied to the 2 USB hosts in the SoC.
The 2 host pairs were already enabled, but the USB PHY wasn't.
VBUS on the 2 ports are always on.

Enable the USB PHY.

Fixes: 04c85ecad32a ("ARM: dts: sun7i: Add dts file for Bananapi M1 Plus
		      board")
Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
 arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
index ba5bca0fe997..44377a98cc89 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -227,3 +227,8 @@
 	pinctrl-0 = <&uart0_pins_a>;
 	status = "okay";
 };
+
+&usbphy {
+	/* VBUS on usb host ports are tied to DC5V and therefore always on */
+	status = "okay";
+};
-- 
2.10.2