[PATCH] ARM64: dts: meson-gxbb-vega-s95: Add SD/SDIO/MMC and PWM nodes

[Kevin Hilman]

Martin Blumenstingl <martin.blumenstingl at googlemail.com> writes:

> All boards from the Tronsmart Vega S95 series are sharing similar MMC
> based hardware.
> sd_emmc_a is used to connect a Broadcom based SDIO wifi card (supported
> by the brcmfmac driver). The 32.768KHz LPO clock for the wifi chip is
> generated by PWM_E.
> sd_emmc_b is routed to the SD-card. Unlike p20x there is no GPIO
> regulator, meaning it only supports 3.3V (which seems to be hard-wired).
> The eMMC chip is connected to sd_emmc_c and is implemented similar to
> the meson-gxbb-p20x boards (meaning that hard-wired fixed regulators
> are used).
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>

Applied to v4.10/dt64.

Kevin