[RFCv2 PATCH 2/5] drm/bridge: dw_hdmi: remove CEC engine register definitions

[Russell King - ARM Linux]

I can't comment on these, you've not included me in patch 1 nor the
covering message.

On Mon, Nov 14, 2016 at 04:22:45PM +0100, Hans Verkuil wrote:
> From: Russell King <rmk+kernel at arm.linux.org.uk>
> 
> We don't need the CEC engine register definitions, so let's remove them.
> 
> Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
> ---
>  drivers/gpu/drm/bridge/dw-hdmi.h | 45 ----------------------------------------
>  1 file changed, 45 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/dw-hdmi.h b/drivers/gpu/drm/bridge/dw-hdmi.h
> index fc9a560..26d6845 100644
> --- a/drivers/gpu/drm/bridge/dw-hdmi.h
> +++ b/drivers/gpu/drm/bridge/dw-hdmi.h
> @@ -478,51 +478,6 @@
>  #define HDMI_A_PRESETUP                         0x501A
>  #define HDMI_A_SRM_BASE                         0x5020
>  
> -/* CEC Engine Registers */
> -#define HDMI_CEC_CTRL                           0x7D00
> -#define HDMI_CEC_STAT                           0x7D01
> -#define HDMI_CEC_MASK                           0x7D02
> -#define HDMI_CEC_POLARITY                       0x7D03
> -#define HDMI_CEC_INT                            0x7D04
> -#define HDMI_CEC_ADDR_L                         0x7D05
> -#define HDMI_CEC_ADDR_H                         0x7D06
> -#define HDMI_CEC_TX_CNT                         0x7D07
> -#define HDMI_CEC_RX_CNT                         0x7D08
> -#define HDMI_CEC_TX_DATA0                       0x7D10
> -#define HDMI_CEC_TX_DATA1                       0x7D11
> -#define HDMI_CEC_TX_DATA2                       0x7D12
> -#define HDMI_CEC_TX_DATA3                       0x7D13
> -#define HDMI_CEC_TX_DATA4                       0x7D14
> -#define HDMI_CEC_TX_DATA5                       0x7D15
> -#define HDMI_CEC_TX_DATA6                       0x7D16
> -#define HDMI_CEC_TX_DATA7                       0x7D17
> -#define HDMI_CEC_TX_DATA8                       0x7D18
> -#define HDMI_CEC_TX_DATA9                       0x7D19
> -#define HDMI_CEC_TX_DATA10                      0x7D1a
> -#define HDMI_CEC_TX_DATA11                      0x7D1b
> -#define HDMI_CEC_TX_DATA12                      0x7D1c
> -#define HDMI_CEC_TX_DATA13                      0x7D1d
> -#define HDMI_CEC_TX_DATA14                      0x7D1e
> -#define HDMI_CEC_TX_DATA15                      0x7D1f
> -#define HDMI_CEC_RX_DATA0                       0x7D20
> -#define HDMI_CEC_RX_DATA1                       0x7D21
> -#define HDMI_CEC_RX_DATA2                       0x7D22
> -#define HDMI_CEC_RX_DATA3                       0x7D23
> -#define HDMI_CEC_RX_DATA4                       0x7D24
> -#define HDMI_CEC_RX_DATA5                       0x7D25
> -#define HDMI_CEC_RX_DATA6                       0x7D26
> -#define HDMI_CEC_RX_DATA7                       0x7D27
> -#define HDMI_CEC_RX_DATA8                       0x7D28
> -#define HDMI_CEC_RX_DATA9                       0x7D29
> -#define HDMI_CEC_RX_DATA10                      0x7D2a
> -#define HDMI_CEC_RX_DATA11                      0x7D2b
> -#define HDMI_CEC_RX_DATA12                      0x7D2c
> -#define HDMI_CEC_RX_DATA13                      0x7D2d
> -#define HDMI_CEC_RX_DATA14                      0x7D2e
> -#define HDMI_CEC_RX_DATA15                      0x7D2f
> -#define HDMI_CEC_LOCK                           0x7D30
> -#define HDMI_CEC_WKUPCTRL                       0x7D31
> -
>  /* I2C Master Registers (E-DDC) */
>  #define HDMI_I2CM_SLAVE                         0x7E00
>  #define HDMI_I2CM_ADDRESS                       0x7E01
> -- 
> 2.8.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.