[PATCH 01/16] ARM: scu: Provide support for parsing SCU device node to enable SCU

[Russell King - ARM Linux]

This should be sent _to_ me because it's touching generic ARM code.
Thanks.

On Mon, Nov 14, 2016 at 10:31:56AM +0530, Pankaj Dubey wrote:
> Many platforms are duplicating code for enabling SCU, lets add
> common code to enable SCU by parsing SCU device node so the duplication
> in each platform can be avoided.
> 
> CC: Krzysztof Kozlowski <krzk at kernel.org>
> CC: Jisheng Zhang <jszhang at marvell.com>
> CC: Russell King <linux at armlinux.org.uk>
> CC: Dinh Nguyen <dinguyen at opensource.altera.com>
> CC: Patrice Chotard <patrice.chotard at st.com>
> CC: Linus Walleij <linus.walleij at linaro.org>
> CC: Liviu Dudau <liviu.dudau at arm.com>
> CC: Ray Jui <rjui at broadcom.com>
> CC: Stephen Warren <swarren at wwwdotorg.org>
> CC: Heiko Stuebner <heiko at sntech.de>
> CC: Shawn Guo <shawnguo at kernel.org>
> CC: Michal Simek <michal.simek at xilinx.com>
> CC: Wei Xu <xuwei5 at hisilicon.com>
> CC: Andrew Lunn <andrew at lunn.ch>
> CC: Jun Nie <jun.nie at linaro.org> 
> Suggested-by: Arnd Bergmann <arnd at arndb.de>
> Signed-off-by: Pankaj Dubey <pankaj.dubey at samsung.com>
> ---
>  arch/arm/include/asm/smp_scu.h |  4 +++
>  arch/arm/kernel/smp_scu.c      | 56 ++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 60 insertions(+)
> 
> diff --git a/arch/arm/include/asm/smp_scu.h b/arch/arm/include/asm/smp_scu.h
> index bfe163c..fdeec07 100644
> --- a/arch/arm/include/asm/smp_scu.h
> +++ b/arch/arm/include/asm/smp_scu.h
> @@ -39,8 +39,12 @@ static inline int scu_power_mode(void __iomem *scu_base, unsigned int mode)
>  
>  #if defined(CONFIG_SMP) && defined(CONFIG_HAVE_ARM_SCU)
>  void scu_enable(void __iomem *scu_base);
> +void __iomem *of_scu_get_base(void);
> +int of_scu_enable(void);
>  #else
>  static inline void scu_enable(void __iomem *scu_base) {}
> +static inline void __iomem *of_scu_get_base(void) {return NULL; }
> +static inline int of_scu_enable(void) {return 0; }
>  #endif
>  
>  #endif
> diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
> index 72f9241..d0ac3ed 100644
> --- a/arch/arm/kernel/smp_scu.c
> +++ b/arch/arm/kernel/smp_scu.c
> @@ -10,6 +10,7 @@
>   */
>  #include <linux/init.h>
>  #include <linux/io.h>
> +#include <linux/of_address.h>
>  
>  #include <asm/smp_plat.h>
>  #include <asm/smp_scu.h>
> @@ -70,6 +71,61 @@ void scu_enable(void __iomem *scu_base)
>  	 */
>  	flush_cache_all();
>  }
> +
> +static const struct of_device_id scu_match[] = {
> +	{ .compatible = "arm,cortex-a9-scu", },
> +	{ .compatible = "arm,cortex-a5-scu", },
> +	{ }
> +};
> +
> +/*
> + * Helper API to get SCU base address
> + * In case platform DT do not have SCU node, or iomap fails
> + * this call will fallback and will try to map via call to
> + * scu_a9_get_base.
> + * This will return ownership of scu_base to the caller
> + */
> +void __iomem *of_scu_get_base(void)
> +{
> +	unsigned long base = 0;
> +	struct device_node *np;
> +	void __iomem *scu_base;
> +
> +	np = of_find_matching_node(NULL, scu_match);
> +	scu_base = of_iomap(np, 0);
> +	of_node_put(np);
> +	if (!scu_base) {
> +		pr_err("%s failed to map scu_base via DT\n", __func__);
> +		if (scu_a9_has_base()) {
> +			base = scu_a9_get_base();
> +			scu_base = ioremap(base, SZ_4K);
> +		}
> +		if (!scu_base) {
> +			pr_err("%s failed to map scu_base\n", __func__);
> +			return IOMEM_ERR_PTR(-ENOMEM);

I can't see the point of using error-pointers here - it's not like we
really know why we're failing, so just return NULL.

> +		}
> +	}
> +	return scu_base;
> +}
> +
> +/*
> + * Enable SCU via mapping scu_base DT
> + * If scu_base mapped successfully scu will be enabled and in case of
> + * failure if will return non-zero error code
> + */
> +int of_scu_enable(void)
> +{
> +	void __iomem *scu_base;
> +
> +	scu_base = of_scu_get_base();
> +	if (!IS_ERR(scu_base)) {
> +		scu_enable(scu_base);
> +		iounmap(scu_base);
> +		return 0;
> +	}
> +	return PTR_ERR(scu_base);

and just return your -ENOMEM here.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.