[PATCH 6/10] clk: sunxi-ng: Add A10s CCU driver
Chen-Yu Tsai
wens at csie.org
Sun Nov 13 01:34:44 PST 2016
On Wed, Nov 9, 2016 at 1:23 AM, Maxime Ripard
<maxime.ripard at free-electrons.com> wrote:
> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> ---
> drivers/clk/sunxi-ng/Kconfig | 10 +-
> drivers/clk/sunxi-ng/Makefile | 1 +-
> drivers/clk/sunxi-ng/ccu-sun5i-a10s.c | 755 +++++++++++++++++++++++++++-
> drivers/clk/sunxi-ng/ccu-sun5i.h | 129 +++++-
> 4 files changed, 895 insertions(+), 0 deletions(-)
> create mode 100644 drivers/clk/sunxi-ng/ccu-sun5i-a10s.c
> create mode 100644 drivers/clk/sunxi-ng/ccu-sun5i.h
>
> diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
> index 8454c6e3dd65..e2becd36a1f9 100644
> --- a/drivers/clk/sunxi-ng/Kconfig
> +++ b/drivers/clk/sunxi-ng/Kconfig
> @@ -64,6 +64,16 @@ config SUN50I_A64_CCU
> select SUNXI_CCU_PHASE
> default ARM64 && ARCH_SUNXI
>
> +config SUN5I_A10S_CCU
> + bool "Support for the Allwinner A10s CCM"
> + select SUNXI_CCU_DIV
> + select SUNXI_CCU_NK
> + select SUNXI_CCU_NKM
> + select SUNXI_CCU_NM
> + select SUNXI_CCU_MP
> + select SUNXI_CCU_PHASE
> + default MACH_SUN5I
> +
> config SUN6I_A31_CCU
> bool "Support for the Allwinner A31/A31s CCU"
> select SUNXI_CCU_DIV
> diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
> index 24fbc6e5deb8..79e9a166dc83 100644
> --- a/drivers/clk/sunxi-ng/Makefile
> +++ b/drivers/clk/sunxi-ng/Makefile
> @@ -19,6 +19,7 @@ obj-$(CONFIG_SUNXI_CCU_MP) += ccu_mp.o
>
> # SoC support
> obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o
> +obj-$(CONFIG_SUN5I_A10S_CCU) += ccu-sun5i-a10s.o
> obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o
> obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o
> obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
> diff --git a/drivers/clk/sunxi-ng/ccu-sun5i-a10s.c b/drivers/clk/sunxi-ng/ccu-sun5i-a10s.c
> new file mode 100644
> index 000000000000..94d9a5cbf60b
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu-sun5i-a10s.c
> @@ -0,0 +1,755 @@
> +/*
> + * Copyright (c) 2016 Maxime Ripard. All rights reserved.
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/of_address.h>
> +
> +#include "ccu_common.h"
> +#include "ccu_reset.h"
> +
> +#include "ccu_div.h"
> +#include "ccu_gate.h"
> +#include "ccu_mp.h"
> +#include "ccu_mult.h"
> +#include "ccu_nk.h"
> +#include "ccu_nkm.h"
> +#include "ccu_nkmp.h"
> +#include "ccu_nm.h"
> +#include "ccu_phase.h"
> +
> +#include "ccu-sun5i.h"
> +
> +static struct ccu_nkmp pll_core_clk = {
> + .enable = BIT(31),
> + .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
> + .k = _SUNXI_CCU_MULT(4, 2),
> + .m = _SUNXI_CCU_DIV(0, 2),
> + .p = _SUNXI_CCU_DIV(16, 2),
> + .common = {
> + .reg = 0x000,
> + .hw.init = CLK_HW_INIT("pll-core",
> + "hosc",
> + &ccu_nkmp_ops,
> + 0),
> + },
> +};
> +
> +/*
> + * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
> + * the base (2x, 4x and 8x), and one variable divider (the one true
> + * pll audio).
> + *
> + * We don't have any need for the variable divider for now, so we just
> + * hardcode it to match with the clock names
> + */
> +#define SUN5I_PLL_AUDIO_REG 0x008
> +
> +static struct ccu_nm pll_audio_base_clk = {
> + .enable = BIT(31),
> + .n = _SUNXI_CCU_MULT_OFFSET(8, 7, 0),
> + .m = _SUNXI_CCU_DIV_OFFSET(0, 5, 0),
Nit: a note explaining that the datasheet is wrong would be nice.
> + .common = {
> + .reg = 0x008,
> + .hw.init = CLK_HW_INIT("pll-audio-base",
> + "hosc",
> + &ccu_nm_ops,
> + 0),
> + },
> +};
> +
> +static struct ccu_mult pll_video0_clk = {
> + .enable = BIT(31),
> + .mult = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(0, 7, 0, 9, 127),
> + .frac = _SUNXI_CCU_FRAC(BIT(15), BIT(14),
> + 270000000, 297000000),
> + .common = {
> + .reg = 0x010,
> + .features = CCU_FEATURE_FRACTIONAL,
> + .hw.init = CLK_HW_INIT("pll-video0",
> + "osc3M",
> + &ccu_mult_ops,
> + 0),
> + },
> +};
> +
> +static struct ccu_nkmp pll_ve_clk = {
> + .enable = BIT(31),
> + .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
> + .k = _SUNXI_CCU_MULT(4, 2),
> + .m = _SUNXI_CCU_DIV(0, 2),
> + .p = _SUNXI_CCU_DIV(16, 2),
Any chance we'll support the bypass switch on this one?
> + .common = {
> + .reg = 0x018,
> + .hw.init = CLK_HW_INIT("pll-ve",
> + "hosc",
> + &ccu_nkmp_ops,
> + 0),
> + },
> +};
> +
> +static struct ccu_nk pll_ddr_base_clk = {
> + .enable = BIT(31),
> + .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
> + .k = _SUNXI_CCU_MULT(4, 2),
> + .common = {
> + .reg = 0x020,
> + .hw.init = CLK_HW_INIT("pll-ddr-base",
> + "hosc",
> + &ccu_nk_ops,
> + 0),
> + },
> +};
> +
> +static SUNXI_CCU_M(pll_ddr_clk, "pll-ddr", "pll-ddr-base", 0x020, 0, 2, 0);
Maybe we should set CLK_IS_CRITICAL on this one as well... in case the
bootloader uses pll-periph for mbus, and none of the dram gates are enabled.
> +
> +static struct ccu_div pll_ddr_other_clk = {
> + .div = _SUNXI_CCU_DIV_FLAGS(16, 2, CLK_DIVIDER_POWER_OF_TWO),
> +
> + .common = {
> + .reg = 0x020,
> + .hw.init = CLK_HW_INIT("pll-ddr-other", "pll-ddr-base",
> + &ccu_div_ops,
> + 0),
> + },
> +};
> +
> +static struct ccu_nk pll_periph_clk = {
> + .enable = BIT(31),
> + .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
> + .k = _SUNXI_CCU_MULT(4, 2),
> + .fixed_post_div = 2,
> + .common = {
> + .reg = 0x028,
> + .features = CCU_FEATURE_FIXED_POSTDIV,
> + .hw.init = CLK_HW_INIT("pll-periph",
> + "hosc",
> + &ccu_nk_ops,
> + 0),
> + },
> +};
> +
> +static struct ccu_mult pll_video1_clk = {
> + .enable = BIT(31),
> + .mult = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(0, 7, 0, 9, 127),
> + .frac = _SUNXI_CCU_FRAC(BIT(15), BIT(14),
> + 270000000, 297000000),
> + .common = {
> + .reg = 0x030,
> + .features = CCU_FEATURE_FRACTIONAL,
> + .hw.init = CLK_HW_INIT("pll-video1",
> + "osc3M",
> + &ccu_mult_ops,
> + 0),
> + },
> +};
> +
> +static SUNXI_CCU_GATE(hosc_clk, "hosc", "osc24M", 0x050, BIT(0), 0);
Why the extra "hosc" clock here? You should probably just internalize "osc24M".
> +
> +#define SUN5I_AHB_REG 0x054
> +static const char * const cpu_parents[] = { "osc32k", "hosc",
> + "pll-core" , "pll-periph" };
> +static const struct ccu_mux_fixed_prediv cpu_predivs[] = {
> + { .index = 3, .div = 3, },
> +};
> +static struct ccu_mux cpu_clk = {
> + .mux = {
> + .shift = 16,
> + .width = 2,
> + .fixed_predivs = cpu_predivs,
> + .n_predivs = ARRAY_SIZE(cpu_predivs),
> + },
> + .common = {
> + .reg = 0x054,
> + .features = CCU_FEATURE_FIXED_PREDIV,
> + .hw.init = CLK_HW_INIT_PARENTS("cpu",
> + cpu_parents,
> + &ccu_mux_ops,
> + CLK_IS_CRITICAL),
> + }
> +};
> +
> +static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x054, 0, 2, 0);
> +
> +static const char * const ahb_parents[] = { "axi" , "cpu", "pll-periph" };
> +static struct ccu_div ahb_clk = {
> + .div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
> + .mux = _SUNXI_CCU_MUX(6, 2),
There's a fixed /2 pre-divider on pll-periph.
> +
> + .common = {
> + .reg = 0x054,
> + .hw.init = CLK_HW_INIT_PARENTS("ahb",
> + ahb_parents,
> + &ccu_div_ops,
> + 0),
> + },
> +};
> +
> +static struct clk_div_table apb0_div_table[] = {
> + { .val = 0, .div = 2 },
> + { .val = 1, .div = 2 },
> + { .val = 2, .div = 4 },
> + { .val = 3, .div = 8 },
> + { /* Sentinel */ },
> +};
> +static SUNXI_CCU_DIV_TABLE(apb0_clk, "apb0", "ahb",
> + 0x054, 8, 2, apb0_div_table, 0);
> +
> +static const char * const apb1_parents[] = { "hosc", "pll-periph", "osc32k" };
> +static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", apb1_parents, 0x058,
> + 0, 5, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + 0);
> +
> +static SUNXI_CCU_GATE(axi_dram_clk, "axi-dram", "axi",
> + 0x05c, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(ahb_otg_clk, "ahb-otg", "ahb",
> + 0x060, BIT(0), 0);
> +static SUNXI_CCU_GATE(ahb_ehci_clk, "ahb-ehci", "ahb",
> + 0x060, BIT(1), 0);
> +static SUNXI_CCU_GATE(ahb_ohci_clk, "ahb-ohci", "ahb",
> + 0x060, BIT(2), 0);
> +static SUNXI_CCU_GATE(ahb_ss_clk, "ahb-ss", "ahb",
> + 0x060, BIT(5), 0);
> +static SUNXI_CCU_GATE(ahb_dma_clk, "ahb-dma", "ahb",
> + 0x060, BIT(6), 0);
> +static SUNXI_CCU_GATE(ahb_bist_clk, "ahb-bist", "ahb",
> + 0x060, BIT(6), 0);
> +static SUNXI_CCU_GATE(ahb_mmc0_clk, "ahb-mmc0", "ahb",
> + 0x060, BIT(8), 0);
> +static SUNXI_CCU_GATE(ahb_mmc1_clk, "ahb-mmc1", "ahb",
> + 0x060, BIT(9), 0);
> +static SUNXI_CCU_GATE(ahb_mmc2_clk, "ahb-mmc2", "ahb",
> + 0x060, BIT(10), 0);
> +static SUNXI_CCU_GATE(ahb_nand_clk, "ahb-nand", "ahb",
> + 0x060, BIT(13), 0);
> +static SUNXI_CCU_GATE(ahb_sdram_clk, "ahb-sdram", "ahb",
> + 0x060, BIT(14), CLK_IS_CRITICAL);
> +static SUNXI_CCU_GATE(ahb_emac_clk, "ahb-emac", "ahb",
> + 0x060, BIT(17), 0);
> +static SUNXI_CCU_GATE(ahb_ts_clk, "ahb-ts", "ahb",
> + 0x060, BIT(18), 0);
> +static SUNXI_CCU_GATE(ahb_spi0_clk, "ahb-spi0", "ahb",
> + 0x060, BIT(20), 0);
> +static SUNXI_CCU_GATE(ahb_spi1_clk, "ahb-spi1", "ahb",
> + 0x060, BIT(21), 0);
> +static SUNXI_CCU_GATE(ahb_spi2_clk, "ahb-spi2", "ahb",
> + 0x060, BIT(22), 0);
> +static SUNXI_CCU_GATE(ahb_gps_clk, "ahb-gps", "ahb",
> + 0x060, BIT(26), 0);
> +static SUNXI_CCU_GATE(ahb_hstimer_clk, "ahb-hstimer", "ahb",
> + 0x060, BIT(28), 0);
> +
> +static SUNXI_CCU_GATE(ahb_ve_clk, "ahb-ve", "ahb",
> + 0x064, BIT(0), 0);
> +static SUNXI_CCU_GATE(ahb_tve_clk, "ahb-tve", "ahb",
> + 0x064, BIT(2), 0);
> +static SUNXI_CCU_GATE(ahb_lcd_clk, "ahb-lcd", "ahb",
> + 0x064, BIT(4), 0);
> +static SUNXI_CCU_GATE(ahb_csi_clk, "ahb-csi", "ahb",
> + 0x064, BIT(8), 0);
> +static SUNXI_CCU_GATE(ahb_hdmi_clk, "ahb-hdmi", "ahb",
> + 0x064, BIT(11), 0);
> +static SUNXI_CCU_GATE(ahb_de_be_clk, "ahb-de-be", "ahb",
> + 0x064, BIT(12), 0);
> +static SUNXI_CCU_GATE(ahb_de_fe_clk, "ahb-de-fe", "ahb",
> + 0x064, BIT(14), 0);
> +static SUNXI_CCU_GATE(ahb_iep_clk, "ahb-iep", "ahb",
> + 0x064, BIT(19), 0);
> +static SUNXI_CCU_GATE(ahb_gpu_clk, "ahb-gpu", "ahb",
> + 0x064, BIT(20), 0);
> +
> +static SUNXI_CCU_GATE(apb0_codec_clk, "apb0-codec", "apb0",
> + 0x068, BIT(0), 0);
> +static SUNXI_CCU_GATE(apb0_i2s_clk, "apb0-i2s", "apb0",
> + 0x068, BIT(3), 0);
> +static SUNXI_CCU_GATE(apb0_pio_clk, "apb0-pio", "apb0",
> + 0x068, BIT(5), 0);
> +static SUNXI_CCU_GATE(apb0_ir_clk, "apb0-ir", "apb0",
> + 0x068, BIT(6), 0);
> +static SUNXI_CCU_GATE(apb0_keypad_clk, "apb0-keypad", "apb0",
> + 0x068, BIT(10), 0);
> +
> +static SUNXI_CCU_GATE(apb1_i2c0_clk, "apb1-i2c0", "apb1",
> + 0x06c, BIT(0), 0);
> +static SUNXI_CCU_GATE(apb1_i2c1_clk, "apb1-i2c1", "apb1",
> + 0x06c, BIT(1), 0);
> +static SUNXI_CCU_GATE(apb1_i2c2_clk, "apb1-i2c2", "apb1",
> + 0x06c, BIT(2), 0);
> +static SUNXI_CCU_GATE(apb1_uart0_clk, "apb1-uart0", "apb1",
> + 0x06c, BIT(16), 0);
> +static SUNXI_CCU_GATE(apb1_uart1_clk, "apb1-uart1", "apb1",
> + 0x06c, BIT(17), 0);
> +static SUNXI_CCU_GATE(apb1_uart2_clk, "apb1-uart2", "apb1",
> + 0x06c, BIT(18), 0);
> +static SUNXI_CCU_GATE(apb1_uart3_clk, "apb1-uart3", "apb1",
> + 0x06c, BIT(19), 0);
> +
> +static const char * const mod0_default_parents[] = { "hosc", "pll-periph",
> + "pll-ddr-other" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", mod0_default_parents, 0x098,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(ss_clk, "ss", mod0_default_parents, 0x09c,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", mod0_default_parents, 0x0a8,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(ir_clk, "ir", mod0_default_parents, 0x0b0,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
> + "pll-audio-2x", "pll-audio" };
> +static SUNXI_CCU_MUX_WITH_GATE(i2s_clk, "i2s", i2s_parents,
> + 0x0b8, 16, 2, BIT(31), 0);
CLK_SET_RATE_PARENT please.
> +
> +static const char * const keypad_parents[] = { "hosc", "losc"};
> +static const u8 keypad_table[] = { 0, 2 };
> +static struct ccu_mp keypad_clk = {
> + .enable = BIT(31),
> + .m = _SUNXI_CCU_DIV(8, 5),
> + .p = _SUNXI_CCU_DIV(20, 2),
> + .mux = _SUNXI_CCU_MUX_TABLE(24, 2, keypad_table),
> +
> + .common = {
> + .reg = 0x0c4,
> + .hw.init = CLK_HW_INIT_PARENTS("keypad",
> + keypad_parents,
> + &ccu_mp_ops,
> + 0),
> + },
> +};
> +
> +static SUNXI_CCU_GATE(usb_ohci_clk, "usb-ohci", "pll-periph",
> + 0x0cc, BIT(6), 0);
> +static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "pll-periph",
> + 0x0cc, BIT(8), 0);
> +static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "pll-periph",
> + 0x0cc, BIT(9), 0);
> +
> +static const char * const gps_parents[] = { "hosc", "pll-periph",
> + "pll-video1", "pll-ve" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(gps_clk, "gps", gps_parents,
> + 0x0d0, 0, 3, 24, 2, BIT(31), 0);
> +
> +static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "pll-ddr",
> + 0x100, BIT(0), 0);
> +static SUNXI_CCU_GATE(dram_csi_clk, "dram-csi", "pll-ddr",
> + 0x100, BIT(1), 0);
> +static SUNXI_CCU_GATE(dram_ts_clk, "dram-ts", "pll-ddr",
> + 0x100, BIT(3), 0);
> +static SUNXI_CCU_GATE(dram_tve_clk, "dram-tve", "pll-ddr",
> + 0x100, BIT(5), 0);
> +static SUNXI_CCU_GATE(dram_de_fe_clk, "dram-de-fe", "pll-ddr",
> + 0x100, BIT(25), 0);
> +static SUNXI_CCU_GATE(dram_de_be_clk, "dram-de-be", "pll-ddr",
> + 0x100, BIT(26), 0);
> +static SUNXI_CCU_GATE(dram_ace_clk, "dram-ace", "pll-ddr",
> + 0x100, BIT(29), 0);
> +static SUNXI_CCU_GATE(dram_iep_clk, "dram-iep", "pll-ddr",
> + 0x100, BIT(31), 0);
> +
> +static const char * const de_parents[] = { "pll-video0", "pll-video1",
> + "pll-ddr-other" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(de_be_clk, "de-be", de_parents,
> + 0x104, 0, 4, 24, 2, BIT(31), 0);
> +
> +static SUNXI_CCU_M_WITH_MUX_GATE(de_fe_clk, "de-fe", de_parents,
> + 0x10c, 0, 4, 24, 2, BIT(31), 0);
> +
> +static const char * const tcon_parents[] = { "pll-video0", "pll-video1",
> + "pll-video0-2x", "pll-video1-2x" };
> +static SUNXI_CCU_MUX_WITH_GATE(tcon_ch0_clk, "tcon-ch0-sclk", tcon_parents,
> + 0x118, 24, 2, BIT(31), 0);
CLK_SET_RATE_PARENT?
> +
> +static SUNXI_CCU_M_WITH_MUX_GATE(tcon_ch1_sclk2_clk, "tcon-ch1-sclk2",
> + tcon_parents,
> + 0x12c, 0, 4, 24, 2, BIT(31), 0);
CLK_SET_RATE_PARENT?
> +
> +static SUNXI_CCU_M_WITH_GATE(tcon_ch1_sclk1_clk, "tcon-ch1-sclk1", "tcon-ch1-sclk2",
> + 0x12c, 11, 1, BIT(15), 0);
CLK_SET_RATE_PARENT?
> +
> +static const char * const csi_parents[] = { "hosc", "pll-video0", "pll-video1",
> + "pll-video0-2x", "pll-video1-2x" };
> +static const u8 csi_table[] = { 0, 1, 2, 5, 6 };
> +static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi_clk, "csi",
> + csi_parents, csi_table,
> + 0x134, 0, 5, 24, 2, BIT(31), 0);
Do you know if CSI needs to change the module clock?
> +
> +static SUNXI_CCU_GATE(ve_clk, "ve", "pll-ve",
> + 0x13c, BIT(31), 0);
CLK_SET_RATE_PARENT?
> +
> +static SUNXI_CCU_GATE(codec_clk, "codec", "pll-audio",
> + 0x140, BIT(31), 0);
CLK_SET_RATE_PARENT?
> +
> +static SUNXI_CCU_GATE(avs_clk, "avs", "hosc",
> + 0x144, BIT(31), 0);
> +
> +static const char * const hdmi_parents[] = { "pll-video0", "pll-video0-2x" };
> +static const u8 hdmi_table[] = { 0, 2 };
> +static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(hdmi_clk, "hdmi",
> + hdmi_parents, hdmi_table,
> + 0x150, 0, 4, 24, 2, BIT(31), 0);
CLK_SET_RATE_PARENT?
> +
> +static const char * const gpu_parents[] = { "pll-video0", "pll-ve",
> + "pll-ddr-other", "pll-video1",
> + "pll-video1-2x" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(gpu_clk, "gpu", gpu_parents,
> + 0x154, 0, 4, 24, 3, BIT(31), 0);
> +
> +static const char * const mbus_parents[] = { "hosc", "pll-periph", "pll-ddr" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
> + 0x15c, 0, 4, 16, 2, 24, 2, BIT(31), CLK_IS_CRITICAL);
> +
> +static SUNXI_CCU_GATE(iep_clk, "iep", "de-be",
> + 0x160, BIT(31), 0);
> +
> +static struct ccu_common *sun5i_a10s_ccu_clks[] = {
> + &hosc_clk.common,
> + &pll_core_clk.common,
> + &pll_audio_base_clk.common,
> + &pll_video0_clk.common,
> + &pll_ve_clk.common,
> + &pll_ddr_base_clk.common,
> + &pll_ddr_clk.common,
> + &pll_ddr_other_clk.common,
> + &pll_periph_clk.common,
> + &pll_video1_clk.common,
> + &cpu_clk.common,
> + &axi_clk.common,
> + &ahb_clk.common,
> + &apb0_clk.common,
> + &apb1_clk.common,
> + &axi_dram_clk.common,
> + &ahb_otg_clk.common,
> + &ahb_ehci_clk.common,
> + &ahb_ohci_clk.common,
> + &ahb_ss_clk.common,
> + &ahb_dma_clk.common,
> + &ahb_bist_clk.common,
> + &ahb_mmc0_clk.common,
> + &ahb_mmc1_clk.common,
> + &ahb_mmc2_clk.common,
> + &ahb_nand_clk.common,
> + &ahb_sdram_clk.common,
> + &ahb_emac_clk.common,
> + &ahb_ts_clk.common,
> + &ahb_spi0_clk.common,
> + &ahb_spi1_clk.common,
> + &ahb_spi2_clk.common,
> + &ahb_gps_clk.common,
> + &ahb_hstimer_clk.common,
> + &ahb_ve_clk.common,
> + &ahb_tve_clk.common,
> + &ahb_lcd_clk.common,
> + &ahb_csi_clk.common,
> + &ahb_hdmi_clk.common,
> + &ahb_de_be_clk.common,
> + &ahb_de_fe_clk.common,
> + &ahb_iep_clk.common,
> + &ahb_gpu_clk.common,
> + &apb0_codec_clk.common,
> + &apb0_i2s_clk.common,
> + &apb0_pio_clk.common,
> + &apb0_ir_clk.common,
> + &apb0_keypad_clk.common,
> + &apb1_i2c0_clk.common,
> + &apb1_i2c1_clk.common,
> + &apb1_i2c2_clk.common,
> + &apb1_uart0_clk.common,
> + &apb1_uart1_clk.common,
> + &apb1_uart2_clk.common,
> + &apb1_uart3_clk.common,
> + &nand_clk.common,
> + &mmc0_clk.common,
> + &mmc1_clk.common,
> + &mmc2_clk.common,
> + &ts_clk.common,
> + &ss_clk.common,
> + &spi0_clk.common,
> + &spi1_clk.common,
> + &spi2_clk.common,
> + &ir_clk.common,
> + &i2s_clk.common,
> + &keypad_clk.common,
> + &usb_ohci_clk.common,
> + &usb_phy0_clk.common,
> + &usb_phy1_clk.common,
> + &gps_clk.common,
> + &dram_ve_clk.common,
> + &dram_csi_clk.common,
> + &dram_ts_clk.common,
> + &dram_tve_clk.common,
> + &dram_de_fe_clk.common,
> + &dram_de_be_clk.common,
> + &dram_ace_clk.common,
> + &dram_iep_clk.common,
> + &de_be_clk.common,
> + &de_fe_clk.common,
> + &tcon_ch0_clk.common,
> + &tcon_ch1_sclk2_clk.common,
> + &tcon_ch1_sclk1_clk.common,
> + &csi_clk.common,
> + &ve_clk.common,
> + &codec_clk.common,
> + &avs_clk.common,
> + &hdmi_clk.common,
> + &gpu_clk.common,
> + &mbus_clk.common,
> + &iep_clk.common,
> +};
> +
> +static CLK_FIXED_FACTOR(osc3M_clk, "osc3M", "hosc", 8, 1, 0);
> +/* We hardcode the divider to 4 for now */
> +static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
> + "pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
> +static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
> + "pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
> +static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
> + "pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
> +static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
> + "pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
> +static CLK_FIXED_FACTOR(pll_video0_2x_clk, "pll-video0-2x",
> + "pll-video0", 1, 2, CLK_SET_RATE_PARENT);
> +static CLK_FIXED_FACTOR(pll_video1_2x_clk, "pll-video1-2x",
> + "pll-video1", 1, 2, CLK_SET_RATE_PARENT);
> +
> +static struct clk_hw_onecell_data sun5i_a10s_hw_clks = {
> + .hws = {
> + [CLK_HOSC] = &hosc_clk.common.hw,
> + [CLK_OSC3M] = &osc3M_clk.hw,
> + [CLK_PLL_CORE] = &pll_core_clk.common.hw,
> + [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
> + [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
> + [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
> + [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
> + [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
> + [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
> + [CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
> + [CLK_PLL_VE] = &pll_ve_clk.common.hw,
> + [CLK_PLL_DDR_BASE] = &pll_ddr_base_clk.common.hw,
> + [CLK_PLL_DDR] = &pll_ddr_clk.common.hw,
> + [CLK_PLL_DDR_OTHER] = &pll_ddr_other_clk.common.hw,
> + [CLK_PLL_PERIPH] = &pll_periph_clk.common.hw,
> + [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
> + [CLK_PLL_VIDEO1_2X] = &pll_video1_2x_clk.hw,
> + [CLK_CPU] = &cpu_clk.common.hw,
> + [CLK_AXI] = &axi_clk.common.hw,
> + [CLK_AHB] = &ahb_clk.common.hw,
> + [CLK_APB0] = &apb0_clk.common.hw,
> + [CLK_APB1] = &apb1_clk.common.hw,
> + [CLK_DRAM_AXI] = &axi_dram_clk.common.hw,
> + [CLK_AHB_OTG] = &ahb_otg_clk.common.hw,
> + [CLK_AHB_EHCI] = &ahb_ehci_clk.common.hw,
> + [CLK_AHB_OHCI] = &ahb_ohci_clk.common.hw,
> + [CLK_AHB_SS] = &ahb_ss_clk.common.hw,
> + [CLK_AHB_DMA] = &ahb_dma_clk.common.hw,
> + [CLK_AHB_BIST] = &ahb_bist_clk.common.hw,
> + [CLK_AHB_MMC0] = &ahb_mmc0_clk.common.hw,
> + [CLK_AHB_MMC1] = &ahb_mmc1_clk.common.hw,
> + [CLK_AHB_MMC2] = &ahb_mmc2_clk.common.hw,
> + [CLK_AHB_NAND] = &ahb_nand_clk.common.hw,
> + [CLK_AHB_SDRAM] = &ahb_sdram_clk.common.hw,
> + [CLK_AHB_EMAC] = &ahb_emac_clk.common.hw,
> + [CLK_AHB_TS] = &ahb_ts_clk.common.hw,
> + [CLK_AHB_SPI0] = &ahb_spi0_clk.common.hw,
> + [CLK_AHB_SPI1] = &ahb_spi1_clk.common.hw,
> + [CLK_AHB_SPI2] = &ahb_spi2_clk.common.hw,
> + [CLK_AHB_GPS] = &ahb_gps_clk.common.hw,
> + [CLK_AHB_HSTIMER] = &ahb_hstimer_clk.common.hw,
> + [CLK_AHB_VE] = &ahb_ve_clk.common.hw,
> + [CLK_AHB_TVE] = &ahb_tve_clk.common.hw,
> + [CLK_AHB_LCD] = &ahb_lcd_clk.common.hw,
> + [CLK_AHB_CSI] = &ahb_csi_clk.common.hw,
> + [CLK_AHB_HDMI] = &ahb_hdmi_clk.common.hw,
> + [CLK_AHB_DE_BE] = &ahb_de_be_clk.common.hw,
> + [CLK_AHB_DE_FE] = &ahb_de_fe_clk.common.hw,
> + [CLK_AHB_IEP] = &ahb_iep_clk.common.hw,
> + [CLK_AHB_GPU] = &ahb_gpu_clk.common.hw,
> + [CLK_APB0_CODEC] = &apb0_codec_clk.common.hw,
> + [CLK_APB0_I2S] = &apb0_i2s_clk.common.hw,
> + [CLK_APB0_PIO] = &apb0_pio_clk.common.hw,
> + [CLK_APB0_IR] = &apb0_ir_clk.common.hw,
> + [CLK_APB0_KEYPAD] = &apb0_keypad_clk.common.hw,
> + [CLK_APB1_I2C0] = &apb1_i2c0_clk.common.hw,
> + [CLK_APB1_I2C1] = &apb1_i2c1_clk.common.hw,
> + [CLK_APB1_I2C2] = &apb1_i2c2_clk.common.hw,
> + [CLK_APB1_UART0] = &apb1_uart0_clk.common.hw,
> + [CLK_APB1_UART1] = &apb1_uart1_clk.common.hw,
> + [CLK_APB1_UART2] = &apb1_uart2_clk.common.hw,
> + [CLK_APB1_UART3] = &apb1_uart3_clk.common.hw,
> + [CLK_NAND] = &nand_clk.common.hw,
> + [CLK_MMC0] = &mmc0_clk.common.hw,
> + [CLK_MMC1] = &mmc1_clk.common.hw,
> + [CLK_MMC2] = &mmc2_clk.common.hw,
> + [CLK_TS] = &ts_clk.common.hw,
> + [CLK_SS] = &ss_clk.common.hw,
> + [CLK_SPI0] = &spi0_clk.common.hw,
> + [CLK_SPI1] = &spi1_clk.common.hw,
> + [CLK_SPI2] = &spi2_clk.common.hw,
> + [CLK_IR] = &ir_clk.common.hw,
> + [CLK_I2S] = &i2s_clk.common.hw,
> + [CLK_KEYPAD] = &keypad_clk.common.hw,
> + [CLK_USB_OHCI] = &usb_ohci_clk.common.hw,
> + [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
> + [CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
> + [CLK_GPS] = &gps_clk.common.hw,
> + [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
> + [CLK_DRAM_CSI] = &dram_csi_clk.common.hw,
> + [CLK_DRAM_TS] = &dram_ts_clk.common.hw,
> + [CLK_DRAM_TVE] = &dram_tve_clk.common.hw,
> + [CLK_DRAM_DE_FE] = &dram_de_fe_clk.common.hw,
> + [CLK_DRAM_DE_BE] = &dram_de_be_clk.common.hw,
> + [CLK_DRAM_ACE] = &dram_ace_clk.common.hw,
> + [CLK_DRAM_IEP] = &dram_iep_clk.common.hw,
> + [CLK_DE_BE] = &de_be_clk.common.hw,
> + [CLK_DE_FE] = &de_fe_clk.common.hw,
> + [CLK_TCON_CH0] = &tcon_ch0_clk.common.hw,
> + [CLK_TCON_CH1_SCLK] = &tcon_ch1_sclk2_clk.common.hw,
> + [CLK_TCON_CH1] = &tcon_ch1_sclk1_clk.common.hw,
> + [CLK_CSI] = &csi_clk.common.hw,
> + [CLK_VE] = &ve_clk.common.hw,
> + [CLK_CODEC] = &codec_clk.common.hw,
> + [CLK_AVS] = &avs_clk.common.hw,
> + [CLK_HDMI] = &hdmi_clk.common.hw,
> + [CLK_GPU] = &gpu_clk.common.hw,
> + [CLK_MBUS] = &mbus_clk.common.hw,
> + [CLK_IEP] = &iep_clk.common.hw,
> + },
> + .num = CLK_NUMBER,
> +};
> +
> +static struct ccu_reset_map sun5i_a10s_ccu_resets[] = {
> + [RST_USB_PHY0] = { 0x0cc, BIT(0) },
> + [RST_USB_PHY1] = { 0x0cc, BIT(1) },
> +
> + [RST_GPS] = { 0x0d0, BIT(30) },
> +
> + [RST_DE_BE] = { 0x104, BIT(30) },
> +
> + [RST_DE_FE] = { 0x10c, BIT(30) },
> +
> + [RST_TVE] = { 0x118, BIT(29) },
> + [RST_LCD] = { 0x118, BIT(30) },
> +
> + [RST_CSI] = { 0x134, BIT(30) },
> +
> + [RST_VE] = { 0x13c, BIT(0) },
> +
> + [RST_GPU] = { 0x154, BIT(30) },
> +
> + [RST_IEP] = { 0x160, BIT(30) },
> +};
> +
> +static const struct sunxi_ccu_desc sun5i_a10s_ccu_desc = {
> + .ccu_clks = sun5i_a10s_ccu_clks,
> + .num_ccu_clks = ARRAY_SIZE(sun5i_a10s_ccu_clks),
> +
> + .hw_clks = &sun5i_a10s_hw_clks,
> +
> + .resets = sun5i_a10s_ccu_resets,
> + .num_resets = ARRAY_SIZE(sun5i_a10s_ccu_resets),
> +};
> +
> +static void __init sun5i_a10s_ccu_setup(struct device_node *node)
> +{
> + void __iomem *reg;
> + u32 val;
> +
> + reg = of_io_request_and_map(node, 0, of_node_full_name(node));
> + if (IS_ERR(reg)) {
> + pr_err("%s: Could not map the clock registers\n",
> + of_node_full_name(node));
> + return;
> + }
> +
> + /* Force the PLL-Audio-1x divider to 4 */
> + val = readl(reg + SUN5I_PLL_AUDIO_REG);
> + val &= ~GENMASK(19, 16);
> + writel(val | (3 << 16), reg + SUN5I_PLL_AUDIO_REG);
> +
> + /*
> + * Use the peripheral PLL as the AHB parent, instead of CPU /
> + * AXI which have rate changes due to cpufreq.
> + *
> + * This is especially a big deal for the HS timer whose parent
> + * clock is AHB.
> + */
> + val = readl(reg + SUN5I_AHB_REG);
> + val &= ~GENMASK(7, 6);
> + writel(val | (2 << 6), reg + SUN5I_AHB_REG);
> +
> + sunxi_ccu_probe(node, reg, &sun5i_a10s_ccu_desc);
> +}
> +CLK_OF_DECLARE(sun5i_a10s_ccu, "allwinner,sun5i-a10s-ccu",
> + sun5i_a10s_ccu_setup);
> diff --git a/drivers/clk/sunxi-ng/ccu-sun5i.h b/drivers/clk/sunxi-ng/ccu-sun5i.h
> new file mode 100644
> index 000000000000..43f2ce3e9e6e
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu-sun5i.h
> @@ -0,0 +1,129 @@
> +/*
> + * Copyright 2016 Maxime Ripard
> + *
> + * Maxime Ripard <maxime.ripard at free-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef _CCU_SUN5I_H_
> +#define _CCU_SUN5I_H_
> +
> +#include <dt-bindings/clock/sun5i-ccu.h>
> +#include <dt-bindings/reset/sun5i-ccu.h>
> +
> +#define CLK_HOSC 1
> +#define CLK_OSC3M 2
> +#define CLK_PLL_CORE 3
> +#define CLK_PLL_AUDIO_BASE 4
> +#define CLK_PLL_AUDIO 5
> +#define CLK_PLL_AUDIO_2X 6
> +#define CLK_PLL_AUDIO_4X 7
> +#define CLK_PLL_AUDIO_8X 8
> +#define CLK_PLL_VIDEO0 9
> +#define CLK_PLL_VIDEO0_2X 10
> +#define CLK_PLL_VE 11
> +#define CLK_PLL_DDR_BASE 12
> +#define CLK_PLL_DDR 13
> +#define CLK_PLL_DDR_OTHER 14
> +#define CLK_PLL_PERIPH 15
> +#define CLK_PLL_VIDEO1 16
> +#define CLK_PLL_VIDEO1_2X 17
> +#define CLK_OSC24M 18
> +#define CLK_CPU 19
> +#define CLK_AXI 20
> +#define CLK_AHB 21
> +#define CLK_APB0 22
> +#define CLK_APB1 23
> +#define CLK_DRAM_AXI 24
> +#define CLK_AHB_OTG 25
> +#define CLK_AHB_EHCI 26
> +#define CLK_AHB_OHCI 27
> +#define CLK_AHB_SS 28
> +#define CLK_AHB_DMA 29
> +#define CLK_AHB_BIST 30
> +#define CLK_AHB_MMC0 31
> +#define CLK_AHB_MMC1 32
> +#define CLK_AHB_MMC2 33
> +#define CLK_AHB_NAND 34
> +#define CLK_AHB_SDRAM 35
> +#define CLK_AHB_EMAC 36
> +#define CLK_AHB_TS 37
> +#define CLK_AHB_SPI0 38
> +#define CLK_AHB_SPI1 39
> +#define CLK_AHB_SPI2 40
> +#define CLK_AHB_GPS 41
> +#define CLK_AHB_HSTIMER 42
> +#define CLK_AHB_VE 43
> +#define CLK_AHB_TVE 44
> +#define CLK_AHB_LCD 45
> +#define CLK_AHB_CSI 46
> +#define CLK_AHB_HDMI 47
> +#define CLK_AHB_DE_BE 48
> +#define CLK_AHB_DE_FE 49
> +#define CLK_AHB_IEP 50
> +#define CLK_AHB_GPU 51
> +#define CLK_APB0_CODEC 52
> +#define CLK_APB0_SPDIF 53
> +#define CLK_APB0_I2S 54
> +#define CLK_APB0_PIO 55
> +#define CLK_APB0_IR 56
> +#define CLK_APB0_KEYPAD 57
> +#define CLK_APB1_I2C0 58
> +#define CLK_APB1_I2C1 59
> +#define CLK_APB1_I2C2 60
> +#define CLK_APB1_UART0 61
> +#define CLK_APB1_UART1 62
> +#define CLK_APB1_UART2 63
> +#define CLK_APB1_UART3 64
> +#define CLK_NAND 65
> +#define CLK_MMC0 66
> +#define CLK_MMC1 67
> +#define CLK_MMC2 68
> +#define CLK_TS 69
> +#define CLK_SS 70
> +#define CLK_CE 71
> +#define CLK_SPI0 72
> +#define CLK_SPI1 73
> +#define CLK_SPI2 74
> +#define CLK_IR 75
> +#define CLK_I2S 76
> +#define CLK_SPDIF 77
> +#define CLK_KEYPAD 78
> +#define CLK_USB_OHCI 79
> +#define CLK_USB_PHY0 80
> +#define CLK_USB_PHY1 81
> +#define CLK_GPS 82
> +#define CLK_DRAM_VE 83
> +#define CLK_DRAM_CSI 84
> +#define CLK_DRAM_TS 85
> +#define CLK_DRAM_TVE 86
> +#define CLK_DRAM_DE_FE 87
> +#define CLK_DRAM_DE_BE 88
> +#define CLK_DRAM_ACE 89
> +#define CLK_DRAM_IEP 90
> +#define CLK_DE_BE 91
> +#define CLK_DE_FE 92
> +#define CLK_TCON_CH0 93
> +#define CLK_TCON_CH1_SCLK 94
> +#define CLK_TCON_CH1 95
> +#define CLK_CSI 96
> +#define CLK_VE 97
> +#define CLK_CODEC 98
> +#define CLK_AVS 99
> +#define CLK_HDMI 100
> +#define CLK_GPU 101
> +#define CLK_MBUS 102
> +#define CLK_IEP 103
> +
> +#define CLK_NUMBER (CLK_IEP + 1)
> +
> +#endif /* _CCU_SUN5I_H_ */
Didn't you already list all the clocks in the device tree bindings header
patch 5?
Regards
ChenYu
More information about the linux-arm-kernel
mailing list