[PATCH v6 5/9] drm/hisilicon/hibmc: Add crtc for DE

Rongrong Zou zourongrong at huawei.com
Sat Nov 12 02:19:18 PST 2016


在 2016/11/11 6:14, Sean Paul 写道:
> On Fri, Oct 28, 2016 at 3:27 AM, Rongrong Zou <zourongrong at gmail.com> wrote:
>> Add crtc funcs and helper funcs for DE.
>>
>> Signed-off-by: Rongrong Zou <zourongrong at gmail.com>
>> ---
>>   drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.c  | 318 ++++++++++++++++++++++++
>>   drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c |   6 +
>>   drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h |   2 +
>>   3 files changed, 326 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.c
>> index 9c1a68c..9b5d0d0 100644
>> --- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.c
>> +++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.c
>> @@ -23,6 +23,7 @@
>>
>>   #include "hibmc_drm_drv.h"
>>   #include "hibmc_drm_regs.h"
>> +#include "hibmc_drm_de.h"
>>   #include "hibmc_drm_power.h"
>
> nit: alphabetize

ok, thanks.

>
>>
>>   /* ---------------------------------------------------------------------- */
>
> Remove

will do, thanks.

>
>> @@ -168,3 +169,320 @@ int hibmc_plane_init(struct hibmc_drm_device *hidev)
>>          drm_plane_helper_add(plane, &hibmc_plane_helper_funcs);
>>          return 0;
>>   }
>> +
>> +static void hibmc_crtc_enable(struct drm_crtc *crtc)
>> +{
>> +       unsigned int reg;
>> +       /* power mode 0 is default. */
>
> This comment seems to be in the wrong place

will remove it, thanks.

>
>> +       struct hibmc_drm_device *hidev = crtc->dev->dev_private;
>> +
>> +       hibmc_set_power_mode(hidev, HIBMC_PW_MODE_CTL_MODE_MODE0);
>> +
>> +       /* Enable display power gate & LOCALMEM power gate*/
>> +       reg = readl(hidev->mmio + HIBMC_CURRENT_GATE);
>> +       reg &= ~HIBMC_CURR_GATE_LOCALMEM_MASK;
>> +       reg &= ~HIBMC_CURR_GATE_DISPLAY_MASK;
>> +       reg |= HIBMC_CURR_GATE_LOCALMEM(ON);
>> +       reg |= HIBMC_CURR_GATE_DISPLAY(ON);
>> +       hibmc_set_current_gate(hidev, reg);
>> +       drm_crtc_vblank_on(crtc);
>> +}
>> +
>> +static void hibmc_crtc_disable(struct drm_crtc *crtc)
>> +{
>> +       unsigned int reg;
>> +       struct hibmc_drm_device *hidev = crtc->dev->dev_private;
>> +
>> +       drm_crtc_vblank_off(crtc);
>> +
>> +       hibmc_set_power_mode(hidev, HIBMC_PW_MODE_CTL_MODE_SLEEP);
>> +
>> +       /* Enable display power gate & LOCALMEM power gate*/
>> +       reg = readl(hidev->mmio + HIBMC_CURRENT_GATE);
>> +       reg &= ~HIBMC_CURR_GATE_LOCALMEM_MASK;
>> +       reg &= ~HIBMC_CURR_GATE_DISPLAY_MASK;
>> +       reg |= HIBMC_CURR_GATE_LOCALMEM(OFF);
>> +       reg |= HIBMC_CURR_GATE_DISPLAY(OFF);
>> +       hibmc_set_current_gate(hidev, reg);
>> +}
>> +
>> +static int hibmc_crtc_atomic_check(struct drm_crtc *crtc,
>> +                                  struct drm_crtc_state *state)
>> +{
>> +       return 0;
>> +}
>
> Caller NULL-checks, no need for stub

thanks for pointing it out.

>
>> +
>> +static unsigned int format_pll_reg(void)
>> +{
>> +       unsigned int pllreg = 0;
>> +       struct panel_pll pll = {0};
>> +
>> +       /* Note that all PLL's have the same format. Here,
>> +        * we just use Panel PLL parameter to work out the bit
>> +        * fields in the register.On returning a 32 bit number, the value can
>> +        * be applied to any PLL in the calling function.
>> +        */
>> +       pllreg |= HIBMC_PLL_CTRL_BYPASS(OFF) & HIBMC_PLL_CTRL_BYPASS_MASK;
>> +       pllreg |= HIBMC_PLL_CTRL_POWER(ON) & HIBMC_PLL_CTRL_POWER_MASK;
>> +       pllreg |= HIBMC_PLL_CTRL_INPUT(OSC) & HIBMC_PLL_CTRL_INPUT_MASK;
>> +       pllreg |= HIBMC_PLL_CTRL_POD(pll.POD) & HIBMC_PLL_CTRL_POD_MASK;
>> +       pllreg |= HIBMC_PLL_CTRL_OD(pll.OD) & HIBMC_PLL_CTRL_OD_MASK;
>> +       pllreg |= HIBMC_PLL_CTRL_N(pll.N) & HIBMC_PLL_CTRL_N_MASK;
>> +       pllreg |= HIBMC_PLL_CTRL_M(pll.M) & HIBMC_PLL_CTRL_M_MASK;
>> +
>> +       return pllreg;
>> +}
>> +
>> +static void set_vclock_hisilicon(struct drm_device *dev, unsigned long pll)
>> +{
>> +       unsigned long tmp0, tmp1;
>> +       struct hibmc_drm_device *hidev = dev->dev_private;
>> +
>> +       /* 1. outer_bypass_n=0 */
>> +       tmp0 = readl(hidev->mmio + CRT_PLL1_HS);
>> +       tmp0 &= 0xBFFFFFFF;
>> +       writel(tmp0, hidev->mmio + CRT_PLL1_HS);
>> +
>> +       /* 2. pll_pd=1?inter_bypass=1 */
>> +       writel(0x21000000, hidev->mmio + CRT_PLL1_HS);
>> +
>> +       /* 3. config pll */
>> +       writel(pll, hidev->mmio + CRT_PLL1_HS);
>> +
>> +       /* 4. delay  */
>> +       mdelay(1);
>
> These should be usleep_range() see
> https://www.kernel.org/doc/Documentation/timers/timers-howto.txt

This looks better to me. i think a 'usleep_range(1000, 2000)' is ok.

>
>> +
>> +       /* 5. pll_pd =0 */
>> +       tmp1 = pll & ~0x01000000;
>> +       writel(tmp1, hidev->mmio + CRT_PLL1_HS);
>> +
>> +       /* 6. delay  */
>> +       mdelay(1);
>> +
>> +       /* 7. inter_bypass=0 */
>> +       tmp1 &= ~0x20000000;
>> +       writel(tmp1, hidev->mmio + CRT_PLL1_HS);
>> +
>> +       /* 8. delay  */
>> +       mdelay(1);
>> +
>> +       /* 9. outer_bypass_n=1 */
>> +       tmp1 |= 0x40000000;
>> +       writel(tmp1, hidev->mmio + CRT_PLL1_HS);
>
> This function is a whole lot of magic. Any chance you can pull the
> values out into #defines?

will do. thanks.

>
>> +}
>> +
>> +/* This function takes care the extra registers and bit fields required to
>
> nit: multi-line comments have a leading /* line with the comment
> starting on the following line

thanks for pointing it out.

>
> applies below as well
>
>
>> + *setup a mode in board.
>
> nit: space between * and comment, ie: * setup a mode in board

understood, thanks.

>
> applies to the rest of the comment too
>
>
>> + *Explanation about Display Control register:
>> + *FPGA only supports 7 predefined pixel clocks, and clock select is
>> + *in bit 4:0 of new register 0x802a8.
>> + */
>> +static unsigned int display_ctrl_adjust(struct drm_device *dev,
>> +                                       struct drm_display_mode *mode,
>> +                                       unsigned int ctrl)
>> +{
>> +       unsigned long x, y;
>> +       unsigned long pll1; /* bit[31:0] of PLL */
>> +       unsigned long pll2; /* bit[63:32] of PLL */
>> +       struct hibmc_drm_device *hidev = dev->dev_private;
>> +
>> +       x = mode->hdisplay;
>> +       y = mode->vdisplay;
>> +
>> +       /* Hisilicon has to set up a new register for PLL control
>> +        *(CRT_PLL1_HS & CRT_PLL2_HS).
>> +        */
>> +       if (x == 800 && y == 600) {
>> +               pll1 = CRT_PLL1_HS_40MHZ;
>> +               pll2 = CRT_PLL2_HS_40MHZ;
>> +       } else if (x == 1024 && y == 768) {
>> +               pll1 = CRT_PLL1_HS_65MHZ;
>> +               pll2 = CRT_PLL2_HS_65MHZ;
>> +       } else if (x == 1152 && y == 864) {
>> +               pll1 = CRT_PLL1_HS_80MHZ_1152;
>> +               pll2 = CRT_PLL2_HS_80MHZ;
>> +       } else if (x == 1280 && y == 768) {
>> +               pll1 = CRT_PLL1_HS_80MHZ;
>> +               pll2 = CRT_PLL2_HS_80MHZ;
>> +       } else if (x == 1280 && y == 720) {
>> +               pll1 = CRT_PLL1_HS_74MHZ;
>> +               pll2 = CRT_PLL2_HS_74MHZ;
>> +       } else if (x == 1280 && y == 960) {
>> +               pll1 = CRT_PLL1_HS_108MHZ;
>> +               pll2 = CRT_PLL2_HS_108MHZ;
>> +       } else if (x == 1280 && y == 1024) {
>> +               pll1 = CRT_PLL1_HS_108MHZ;
>> +               pll2 = CRT_PLL2_HS_108MHZ;
>> +       } else if (x == 1600 && y == 1200) {
>> +               pll1 = CRT_PLL1_HS_162MHZ;
>> +               pll2 = CRT_PLL2_HS_162MHZ;
>> +       } else if (x == 1920 && y == 1080) {
>> +               pll1 = CRT_PLL1_HS_148MHZ;
>> +               pll2 = CRT_PLL2_HS_148MHZ;
>> +       } else if (x == 1920 && y == 1200) {
>> +               pll1 = CRT_PLL1_HS_193MHZ;
>> +               pll2 = CRT_PLL2_HS_193MHZ;
>> +       } else /* default to VGA clock */ {
>> +               pll1 = CRT_PLL1_HS_25MHZ;
>> +               pll2 = CRT_PLL2_HS_25MHZ;
>> +       }
>
> This seems like something that should be checked in atomic_check so
> you can be sure the mode is supported.
>
> It would also be nice to pull this out into a separate function (and a
> lookup table if you're feeling adventurous)

a lookup table seems good, thanks.

>
>> +
>> +       writel(pll2, hidev->mmio + CRT_PLL2_HS);
>> +       set_vclock_hisilicon(dev, pll1);
>> +
>> +       /* Hisilicon has to set up the top-left and bottom-right
>> +        * registers as well.
>> +        * Note that normal chip only use those two register for
>> +        * auto-centering mode.
>> +        */
>> +       writel((HIBMC_CRT_AUTO_CENTERING_TL_TOP(0) &
>> +               HIBMC_CRT_AUTO_CENTERING_TL_TOP_MSK) |
>> +              (HIBMC_CRT_AUTO_CENTERING_TL_LEFT(0) &
>> +               HIBMC_CRT_AUTO_CENTERING_TL_LEFT_MSK),
>> +              hidev->mmio + HIBMC_CRT_AUTO_CENTERING_TL);
>> +
>> +       writel((HIBMC_CRT_AUTO_CENTERING_BR_BOTTOM(y - 1) &
>> +               HIBMC_CRT_AUTO_CENTERING_BR_BOTTOM_MASK) |
>> +              (HIBMC_CRT_AUTO_CENTERING_BR_RIGHT(x - 1) &
>> +               HIBMC_CRT_AUTO_CENTERING_BR_RIGHT_MASK),
>> +               hidev->mmio + HIBMC_CRT_AUTO_CENTERING_BR);
>> +
>> +       /* Assume common fields in ctrl have been properly set before
>> +        * calling this function.
>> +        * This function only sets the extra fields in ctrl.
>> +        */
>> +
>> +       /* Set bit 25 of display controller: Select CRT or VGA clock */
>> +       ctrl &= ~HIBMC_CRT_DISP_CTL_CRTSELECT_MASK;
>> +       ctrl &= ~HIBMC_CRT_DISP_CTL_CLOCK_PHASE_MASK;
>> +
>> +       ctrl |= HIBMC_CRT_DISP_CTL_CRTSELECT(CRTSELECT_CRT);
>> +
>> +       /*ctrl = FIELD_SET(ctrl, HIBMC_CRT_DISP_CTL, CRTSELECT, CRT);*/
>
> What's the deal with this commented code?

sorry, will clean up.

>
>> +
>> +       /* Set bit 14 of display controller */
>> +       /*ctrl &= FIELD_CLEAR(HIBMC_CRT_DISP_CTL, CLOCK_PHASE);*/
>> +
>> +       /* clock_phase_polarity is 0 */
>> +       ctrl |= HIBMC_CRT_DISP_CTL_CLOCK_PHASE(PHASE_ACTIVE_HIGH);
>> +       /*ctrl = FIELD_SET(ctrl, HIBMC_CRT_DISP_CTL,*/
>> +       /*CLOCK_PHASE, ACTIVE_HIGH);*/
>
> Here too...

ditto.

>
>> +
>> +       writel(ctrl, hidev->mmio + HIBMC_CRT_DISP_CTL);
>> +
>> +       return ctrl;
>> +}
>> +
>> +static void hibmc_crtc_mode_set_nofb(struct drm_crtc *crtc)
>> +{
>> +       unsigned int val;
>> +       struct drm_display_mode *mode = &crtc->state->mode;
>> +       struct drm_device *dev = crtc->dev;
>> +       struct hibmc_drm_device *hidev = dev->dev_private;
>> +
>> +       writel(format_pll_reg(), hidev->mmio + HIBMC_CRT_PLL_CTRL);
>> +       writel((HIBMC_CRT_HORZ_TOTAL_TOTAL(mode->htotal - 1) &
>> +               HIBMC_CRT_HORZ_TOTAL_TOTAL_MASK) |
>> +               (HIBMC_CRT_HORZ_TOTAL_DISPLAY_END(mode->hdisplay - 1) &
>> +               HIBMC_CRT_HORZ_TOTAL_DISPLAY_END_MASK),
>
> You could probably macroize this code to make it more readable


	#define HIBMC_FIELD(field, value) (field(value) & filed##_MASK)

	writel(HIBMC_FIELD(HIBMC_CRT_HORZ_TOTAL_TOTAL, mode->htotal - 1) |
	       HIBMC_FIELD(HIBMC_CRT_HORZ_TOTAL_DISPLAY_END, mode->hdisplay - 1),
	       hidev->mmio + HIBMC_CRT_HORZ_TOTAL);

Is above ok?
	


>
>> +               hidev->mmio + HIBMC_CRT_HORZ_TOTAL);
>> +
>> +       writel((HIBMC_CRT_HORZ_SYNC_WIDTH(mode->hsync_end - mode->hsync_start)
>> +               & HIBMC_CRT_HORZ_SYNC_WIDTH_MASK) |
>> +               (HIBMC_CRT_HORZ_SYNC_START(mode->hsync_start - 1)
>> +               & HIBMC_CRT_HORZ_SYNC_START_MASK),
>> +               hidev->mmio + HIBMC_CRT_HORZ_SYNC);
>> +
>> +       writel((HIBMC_CRT_VERT_TOTAL_TOTAL(mode->vtotal - 1) &
>> +               HIBMC_CRT_VERT_TOTAL_TOTAL_MASK) |
>> +               (HIBMC_CRT_VERT_TOTAL_DISPLAY_END(mode->vdisplay - 1) &
>> +               HIBMC_CRT_VERT_TOTAL_DISPLAY_END_MASK),
>> +               hidev->mmio + HIBMC_CRT_VERT_TOTAL);
>> +
>> +       writel((HIBMC_CRT_VERT_SYNC_HEIGHT(mode->vsync_end - mode->vsync_start)
>> +               & HIBMC_CRT_VERT_SYNC_HEIGHT_MASK) |
>> +              (HIBMC_CRT_VERT_SYNC_START(mode->vsync_start - 1) &
>> +               HIBMC_CRT_VERT_SYNC_START_MASK),
>> +               hidev->mmio + HIBMC_CRT_VERT_SYNC);
>> +
>> +       val = HIBMC_CRT_DISP_CTL_VSYNC_PHASE(0) &
>> +             HIBMC_CRT_DISP_CTL_VSYNC_PHASE_MASK;
>> +       val |= HIBMC_CRT_DISP_CTL_HSYNC_PHASE(0) &
>> +              HIBMC_CRT_DISP_CTL_HSYNC_PHASE_MASK;
>> +       val |= HIBMC_CRT_DISP_CTL_TIMING(ENABLE);
>> +       val |= HIBMC_CRT_DISP_CTL_PLANE(ENABLE);
>> +
>> +       display_ctrl_adjust(dev, mode, val);
>> +}
>> +
>> +static void hibmc_crtc_atomic_begin(struct drm_crtc *crtc,
>> +                                   struct drm_crtc_state *old_state)
>> +{
>> +       unsigned int reg;
>> +       struct drm_device *dev = crtc->dev;
>> +       struct hibmc_drm_device *hidev = dev->dev_private;
>> +
>> +       hibmc_set_power_mode(hidev, HIBMC_PW_MODE_CTL_MODE_MODE0);
>> +
>> +       /* Enable display power gate & LOCALMEM power gate*/
>> +       reg = readl(hidev->mmio + HIBMC_CURRENT_GATE);
>> +       reg &= ~HIBMC_CURR_GATE_DISPLAY_MASK;
>> +       reg &= ~HIBMC_CURR_GATE_LOCALMEM_MASK;
>> +       reg |= HIBMC_CURR_GATE_DISPLAY(ON);
>> +       reg |= HIBMC_CURR_GATE_LOCALMEM(ON);
>> +       hibmc_set_current_gate(hidev, reg);
>> +
>> +       /* We can add more initialization as needed. */
>> +}
>> +
>> +static void hibmc_crtc_atomic_flush(struct drm_crtc *crtc,
>> +                                   struct drm_crtc_state *old_state)
>> +
>> +{
>> +       unsigned long flags;
>> +
>> +       spin_lock_irqsave(&crtc->dev->event_lock, flags);
>> +       if (crtc->state->event)
>> +               drm_crtc_send_vblank_event(crtc, crtc->state->event);
>> +       crtc->state->event = NULL;
>> +
>> +       spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
>> +}
>> +
>> +/* These provide the minimum set of functions required to handle a CRTC */
>
> nit: don't need this comment

will delete, thanks.

>
>> +static const struct drm_crtc_funcs hibmc_crtc_funcs = {
>> +       .page_flip = drm_atomic_helper_page_flip,
>> +       .set_config = drm_atomic_helper_set_config,
>> +       .destroy = drm_crtc_cleanup,
>> +       .reset = drm_atomic_helper_crtc_reset,
>> +       .atomic_duplicate_state =  drm_atomic_helper_crtc_duplicate_state,
>> +       .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
>> +};
>> +
>> +static const struct drm_crtc_helper_funcs hibmc_crtc_helper_funcs = {
>> +       .enable         = hibmc_crtc_enable,
>> +       .disable        = hibmc_crtc_disable,
>> +       .mode_set_nofb  = hibmc_crtc_mode_set_nofb,
>> +       .atomic_check   = hibmc_crtc_atomic_check,
>> +       .atomic_begin   = hibmc_crtc_atomic_begin,
>> +       .atomic_flush   = hibmc_crtc_atomic_flush,
>> +};
>> +
>> +int hibmc_crtc_init(struct hibmc_drm_device *hidev)
>> +{
>> +       struct drm_device *dev = hidev->dev;
>> +       struct drm_crtc *crtc = &hidev->crtc;
>> +       struct drm_plane *plane = &hidev->plane;
>> +       int ret;
>> +
>> +       ret = drm_crtc_init_with_planes(dev, crtc, plane,
>> +                                       NULL, &hibmc_crtc_funcs, NULL);
>> +       if (ret) {
>> +               DRM_ERROR("failed to init crtc.\n");
>
> print return code

agreed, thanks.

>
>> +               return ret;
>> +       }
>> +
>> +       drm_mode_crtc_set_gamma_size(crtc, 256);
>
> check return code

agreed though none of other drivers has done this,
thanks.

>
>> +       drm_crtc_helper_add(crtc, &hibmc_crtc_helper_funcs);
>> +       return 0;
>> +}
>> diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
>> index 7d96583..303cd36 100644
>> --- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
>> +++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
>> @@ -119,6 +119,12 @@ static int hibmc_kms_init(struct hibmc_drm_device *hidev)
>>                  return ret;
>>          }
>>
>> +       ret = hibmc_crtc_init(hidev);
>> +       if (ret) {
>> +               DRM_ERROR("failed to init crtc.\n");
>> +               return ret;
>> +       }
>
> Typically the plane is initialized internally in the crtc driver. I
> think this is a good design pattern, and you should probably use it.
>
> So how about squashing this down with the plane patch and keeping the
> plane inside hibmc_drm_de.c?

understood after i looked at intel_display.c, this file will be merged
with patch 4/9, and the tile will be: 'drm/hisilicon/hibmc: Add display
engine'.

>
>> +
>>          return 0;
>>   }
>>
>> diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
>> index 49e39d2..5731ec2 100644
>> --- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
>> +++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
>> @@ -46,6 +46,7 @@ struct hibmc_drm_device {
>>          /* drm */
>>          struct drm_device  *dev;
>>          struct drm_plane plane;
>
> I don't think you should be keeping track of plane here. plane is only
> used in the crtc init, which should be addressed by the previous
> comment.

so allocate with devm_kzalloc(sizeof(*plane)) and remove it from
hibmc_drm_device?

>
>
>> +       struct drm_crtc crtc;
>
> crtc is only used in the irq handler, so you could remove this here
> and just call drm_handle_vblank(dev, 0) in the handler.

so allocate with devm_kzalloc(sizeof(*crtc)) and remove it from
hibmc_drm_device, when driver unload drm_crtc_cleanup() will be
called and finally memory will be freed before quit.

>
>
>>          bool mode_config_initialized;
>>
>>          /* ttm */
>> @@ -85,6 +86,7 @@ static inline struct hibmc_bo *gem_to_hibmc_bo(struct drm_gem_object *gem)
>>   #define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
>>
>>   int hibmc_plane_init(struct hibmc_drm_device *hidev);
>> +int hibmc_crtc_init(struct hibmc_drm_device *hidev);
>>   int hibmc_fbdev_init(struct hibmc_drm_device *hidev);
>>   void hibmc_fbdev_fini(struct hibmc_drm_device *hidev);
>>
>> --
>> 1.9.1
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> _______________________________________________
> linuxarm mailing list
> linuxarm at huawei.com
> http://rnd-openeuler.huawei.com/mailman/listinfo/linuxarm
>
> .
>


-- 
Regards, Rongrong



More information about the linux-arm-kernel mailing list