[PATCH] crypto: arm64/sha2: integrate OpenSSL implementations of SHA256/SHA512

Ard Biesheuvel ard.biesheuvel at linaro.org
Fri Nov 11 05:51:13 PST 2016


This integrates both the accelerated scalar and the NEON implementations
of SHA-224/256 as well as SHA-384/512 from the OpenSSL project.

Relative performance compared to the respective generic C versions:

                 |  SHA256-scalar  | SHA256-NEON* |  SHA512  |
     ------------+-----------------+--------------+----------+
     Cortex-A53  |      1.63x      |     1.63x    |   2.34x  |
     Cortex-A57  |      1.43x      |     1.59x    |   1.95x  |
     Cortex-A73  |      1.26x      |     1.56x    |     ?    |

The core crypto code was authored by Andy Polyakov of the OpenSSL
project, in collaboration with whom the upstream code was adapted so
that this module can be built from the same version of sha512-armv8.pl.

The version in this patch was taken from OpenSSL commit

   866e505e0d66 sha/asm/sha512-armv8.pl: add NEON version of SHA256.

* The core SHA algorithm is fundamentally sequential, but there is a
  secondary transformation involved, called the schedule update, which
  can be performed independently. The NEON version of SHA-224/SHA-256
  only implements this part of the algorithm using NEON instructions,
  the sequential part is always done using scalar instructions.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
---

This supersedes the SHA-256-NEON-only patch I sent out about 6 weeks ago.

Will, Catalin: note that this pulls in a .pl script, and adds a build rule
locally in arch/arm64/crypto to generate .S files on the fly from Perl
scripts. I will leave it to you to decide whether you are ok with this as
is, or whether you prefer .S_shipped files, in which case the Perl script
is only included as a reference (this is how we did it for arch/arm in the
past, but given that it adds about 3000 lines of generated code to the patch,
I think we may want to simply keep it as below)
 
 arch/arm64/crypto/Kconfig         |   8 +
 arch/arm64/crypto/Makefile        |  15 +
 arch/arm64/crypto/sha256-glue.c   | 185 +++++
 arch/arm64/crypto/sha512-armv8.pl | 778 ++++++++++++++++++++
 arch/arm64/crypto/sha512-glue.c   |  94 +++
 5 files changed, 1080 insertions(+)

diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig
index 2cf32e9887e1..5f4a617e2957 100644
--- a/arch/arm64/crypto/Kconfig
+++ b/arch/arm64/crypto/Kconfig
@@ -8,6 +8,14 @@ menuconfig ARM64_CRYPTO
 
 if ARM64_CRYPTO
 
+config CRYPTO_SHA256_ARM64
+	tristate "SHA-224/SHA-256 digest algorithm for arm64"
+	select CRYPTO_HASH
+
+config CRYPTO_SHA512_ARM64
+	tristate "SHA-384/SHA-512 digest algorithm for arm64"
+	select CRYPTO_HASH
+
 config CRYPTO_SHA1_ARM64_CE
 	tristate "SHA-1 digest algorithm (ARMv8 Crypto Extensions)"
 	depends on ARM64 && KERNEL_MODE_NEON
diff --git a/arch/arm64/crypto/Makefile b/arch/arm64/crypto/Makefile
index abb79b3cfcfe..861589faf6ef 100644
--- a/arch/arm64/crypto/Makefile
+++ b/arch/arm64/crypto/Makefile
@@ -29,6 +29,12 @@ aes-ce-blk-y := aes-glue-ce.o aes-ce.o
 obj-$(CONFIG_CRYPTO_AES_ARM64_NEON_BLK) += aes-neon-blk.o
 aes-neon-blk-y := aes-glue-neon.o aes-neon.o
 
+obj-$(CONFIG_CRYPTO_SHA256_ARM64) += sha256-arm64.o
+sha256-arm64-y := sha256-glue.o sha256-core.o
+
+obj-$(CONFIG_CRYPTO_SHA512_ARM64) += sha512-arm64.o
+sha512-arm64-y := sha512-glue.o sha512-core.o
+
 AFLAGS_aes-ce.o		:= -DINTERLEAVE=4
 AFLAGS_aes-neon.o	:= -DINTERLEAVE=4
 
@@ -40,3 +46,12 @@ CFLAGS_crc32-arm64.o	:= -mcpu=generic+crc
 
 $(obj)/aes-glue-%.o: $(src)/aes-glue.c FORCE
 	$(call if_changed_rule,cc_o_c)
+
+quiet_cmd_perl = PERLASM $@
+      cmd_perl = $(PERL) $(<) void $(@)
+
+$(obj)/sha256-core.S: $(src)/sha512-armv8.pl
+	$(call cmd,perl)
+
+$(obj)/sha512-core.S: $(src)/sha512-armv8.pl
+	$(call cmd,perl)
diff --git a/arch/arm64/crypto/sha256-glue.c b/arch/arm64/crypto/sha256-glue.c
new file mode 100644
index 000000000000..a2226f841960
--- /dev/null
+++ b/arch/arm64/crypto/sha256-glue.c
@@ -0,0 +1,185 @@
+/*
+ * Linux/arm64 port of the OpenSSL SHA256 implementation for AArch64
+ *
+ * Copyright (c) 2016 Linaro Ltd. <ard.biesheuvel at linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+
+#include <asm/hwcap.h>
+#include <asm/neon.h>
+#include <asm/simd.h>
+#include <crypto/internal/hash.h>
+#include <crypto/sha.h>
+#include <crypto/sha256_base.h>
+#include <linux/cryptohash.h>
+#include <linux/types.h>
+#include <linux/string.h>
+
+MODULE_DESCRIPTION("SHA-224/SHA-256 secure hash for arm64");
+MODULE_AUTHOR("Andy Polyakov <appro at openssl.org>");
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel at linaro.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_CRYPTO("sha224");
+MODULE_ALIAS_CRYPTO("sha256");
+
+asmlinkage void sha256_block_data_order(u32 *digest, const void *data,
+					unsigned int num_blks);
+
+asmlinkage void sha256_block_neon(u32 *digest, const void *data,
+				  unsigned int num_blks);
+
+static int sha256_update(struct shash_desc *desc, const u8 *data,
+			 unsigned int len)
+{
+	return sha256_base_do_update(desc, data, len,
+				(sha256_block_fn *)sha256_block_data_order);
+}
+
+static int sha256_finup(struct shash_desc *desc, const u8 *data,
+			unsigned int len, u8 *out)
+{
+	if (len)
+		sha256_base_do_update(desc, data, len,
+				(sha256_block_fn *)sha256_block_data_order);
+	sha256_base_do_finalize(desc,
+				(sha256_block_fn *)sha256_block_data_order);
+
+	return sha256_base_finish(desc, out);
+}
+
+static int sha256_final(struct shash_desc *desc, u8 *out)
+{
+	return sha256_finup(desc, NULL, 0, out);
+}
+
+static struct shash_alg algs[] = { {
+	.digestsize		= SHA256_DIGEST_SIZE,
+	.init			= sha256_base_init,
+	.update			= sha256_update,
+	.final			= sha256_final,
+	.finup			= sha256_finup,
+	.descsize		= sizeof(struct sha256_state),
+	.base.cra_name		= "sha256",
+	.base.cra_driver_name	= "sha256-arm64",
+	.base.cra_priority	= 100,
+	.base.cra_flags		= CRYPTO_ALG_TYPE_SHASH,
+	.base.cra_blocksize	= SHA256_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+}, {
+	.digestsize		= SHA224_DIGEST_SIZE,
+	.init			= sha224_base_init,
+	.update			= sha256_update,
+	.final			= sha256_final,
+	.finup			= sha256_finup,
+	.descsize		= sizeof(struct sha256_state),
+	.base.cra_name		= "sha224",
+	.base.cra_driver_name	= "sha224-arm64",
+	.base.cra_priority	= 100,
+	.base.cra_flags		= CRYPTO_ALG_TYPE_SHASH,
+	.base.cra_blocksize	= SHA224_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+} };
+
+static int sha256_update_neon(struct shash_desc *desc, const u8 *data,
+			      unsigned int len)
+{
+	/*
+	 * Stacking and unstacking a substantial slice of the NEON register
+	 * file may significantly affect performance for small updates when
+	 * executing in interrupt context, so fall back to the scalar code
+	 * in that case.
+	 */
+	if (!may_use_simd())
+		return sha256_base_do_update(desc, data, len,
+				(sha256_block_fn *)sha256_block_data_order);
+
+	kernel_neon_begin();
+	sha256_base_do_update(desc, data, len,
+				(sha256_block_fn *)sha256_block_neon);
+	kernel_neon_end();
+
+	return 0;
+}
+
+static int sha256_finup_neon(struct shash_desc *desc, const u8 *data,
+			     unsigned int len, u8 *out)
+{
+	if (!may_use_simd()) {
+		if (len)
+			sha256_base_do_update(desc, data, len,
+				(sha256_block_fn *)sha256_block_data_order);
+		sha256_base_do_finalize(desc,
+				(sha256_block_fn *)sha256_block_data_order);
+	} else {
+		kernel_neon_begin();
+		if (len)
+			sha256_base_do_update(desc, data, len,
+				(sha256_block_fn *)sha256_block_neon);
+		sha256_base_do_finalize(desc,
+				(sha256_block_fn *)sha256_block_neon);
+		kernel_neon_end();
+	}
+	return sha256_base_finish(desc, out);
+}
+
+static int sha256_final_neon(struct shash_desc *desc, u8 *out)
+{
+	return sha256_finup_neon(desc, NULL, 0, out);
+}
+
+static struct shash_alg neon_algs[] = { {
+	.digestsize		= SHA256_DIGEST_SIZE,
+	.init			= sha256_base_init,
+	.update			= sha256_update_neon,
+	.final			= sha256_final_neon,
+	.finup			= sha256_finup_neon,
+	.descsize		= sizeof(struct sha256_state),
+	.base.cra_name		= "sha256",
+	.base.cra_driver_name	= "sha256-arm64-neon",
+	.base.cra_priority	= 150,
+	.base.cra_flags		= CRYPTO_ALG_TYPE_SHASH,
+	.base.cra_blocksize	= SHA256_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+}, {
+	.digestsize		= SHA224_DIGEST_SIZE,
+	.init			= sha224_base_init,
+	.update			= sha256_update_neon,
+	.final			= sha256_final_neon,
+	.finup			= sha256_finup_neon,
+	.descsize		= sizeof(struct sha256_state),
+	.base.cra_name		= "sha224",
+	.base.cra_driver_name	= "sha224-arm64-neon",
+	.base.cra_priority	= 150,
+	.base.cra_flags		= CRYPTO_ALG_TYPE_SHASH,
+	.base.cra_blocksize	= SHA224_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+} };
+
+static int __init sha256_mod_init(void)
+{
+	int ret = crypto_register_shashes(algs, ARRAY_SIZE(algs));
+	if (ret)
+		return ret;
+
+	if (elf_hwcap & HWCAP_ASIMD) {
+		ret = crypto_register_shashes(neon_algs, ARRAY_SIZE(neon_algs));
+		if (ret)
+			crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
+	}
+	return ret;
+}
+
+static void __exit sha256_mod_fini(void)
+{
+	if (elf_hwcap & HWCAP_ASIMD)
+		crypto_unregister_shashes(neon_algs, ARRAY_SIZE(neon_algs));
+	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
+}
+
+module_init(sha256_mod_init);
+module_exit(sha256_mod_fini);
diff --git a/arch/arm64/crypto/sha512-armv8.pl b/arch/arm64/crypto/sha512-armv8.pl
new file mode 100644
index 000000000000..ffae5f23bcd8
--- /dev/null
+++ b/arch/arm64/crypto/sha512-armv8.pl
@@ -0,0 +1,778 @@
+#! /usr/bin/env perl
+# Copyright 2014-2016 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+# ====================================================================
+# Written by Andy Polyakov <appro at openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+#
+# Permission to use under GPLv2 terms is granted.
+# ====================================================================
+#
+# SHA256/512 for ARMv8.
+#
+# Performance in cycles per processed byte and improvement coefficient
+# over code generated with "default" compiler:
+#
+#		SHA256-hw	SHA256(*)	SHA512
+# Apple A7	1.97		10.5 (+33%)	6.73 (-1%(**))
+# Cortex-A53	2.38		15.5 (+115%)	10.0 (+150%(***))
+# Cortex-A57	2.31		11.6 (+86%)	7.51 (+260%(***))
+# Denver	2.01		10.5 (+26%)	6.70 (+8%)
+# X-Gene			20.0 (+100%)	12.8 (+300%(***))
+# Mongoose	2.36		13.0 (+50%)	8.36 (+33%)
+#
+# (*)	Software SHA256 results are of lesser relevance, presented
+#	mostly for informational purposes.
+# (**)	The result is a trade-off: it's possible to improve it by
+#	10% (or by 1 cycle per round), but at the cost of 20% loss
+#	on Cortex-A53 (or by 4 cycles per round).
+# (***)	Super-impressive coefficients over gcc-generated code are
+#	indication of some compiler "pathology", most notably code
+#	generated with -mgeneral-regs-only is significanty faster
+#	and the gap is only 40-90%.
+#
+# October 2016.
+#
+# Originally it was reckoned that it makes no sense to implement NEON
+# version of SHA256 for 64-bit processors. This is because performance
+# improvement on most wide-spread Cortex-A5x processors was observed
+# to be marginal, same on Cortex-A53 and ~10% on A57. But then it was
+# observed that 32-bit NEON SHA256 performs significantly better than
+# 64-bit scalar version on *some* of the more recent processors. As
+# result 64-bit NEON version of SHA256 was added to provide best
+# all-round performance. For example it executes ~30% faster on X-Gene
+# and Mongoose. [For reference, NEON version of SHA512 is bound to
+# deliver much less improvement, likely *negative* on Cortex-A5x.
+# Which is why NEON support is limited to SHA256.]
+
+$output=pop;
+$flavour=pop;
+
+if ($flavour && $flavour ne "void") {
+    $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+    ( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
+    ( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
+    die "can't locate arm-xlate.pl";
+
+    open OUT,"| \"$^X\" $xlate $flavour $output";
+    *STDOUT=*OUT;
+} else {
+    open STDOUT,">$output";
+}
+
+if ($output =~ /512/) {
+	$BITS=512;
+	$SZ=8;
+	@Sigma0=(28,34,39);
+	@Sigma1=(14,18,41);
+	@sigma0=(1,  8, 7);
+	@sigma1=(19,61, 6);
+	$rounds=80;
+	$reg_t="x";
+} else {
+	$BITS=256;
+	$SZ=4;
+	@Sigma0=( 2,13,22);
+	@Sigma1=( 6,11,25);
+	@sigma0=( 7,18, 3);
+	@sigma1=(17,19,10);
+	$rounds=64;
+	$reg_t="w";
+}
+
+$func="sha${BITS}_block_data_order";
+
+($ctx,$inp,$num,$Ktbl)=map("x$_",(0..2,30));
+
+ at X=map("$reg_t$_",(3..15,0..2));
+ at V=($A,$B,$C,$D,$E,$F,$G,$H)=map("$reg_t$_",(20..27));
+($t0,$t1,$t2,$t3)=map("$reg_t$_",(16,17,19,28));
+
+sub BODY_00_xx {
+my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_;
+my $j=($i+1)&15;
+my ($T0,$T1,$T2)=(@X[($i-8)&15], at X[($i-9)&15], at X[($i-10)&15]);
+   $T0=@X[$i+3] if ($i<11);
+
+$code.=<<___	if ($i<16);
+#ifndef	__ARMEB__
+	rev	@X[$i], at X[$i]			// $i
+#endif
+___
+$code.=<<___	if ($i<13 && ($i&1));
+	ldp	@X[$i+1], at X[$i+2],[$inp],#2*$SZ
+___
+$code.=<<___	if ($i==13);
+	ldp	@X[14], at X[15],[$inp]
+___
+$code.=<<___	if ($i>=14);
+	ldr	@X[($i-11)&15],[sp,#`$SZ*(($i-11)%4)`]
+___
+$code.=<<___	if ($i>0 && $i<16);
+	add	$a,$a,$t1			// h+=Sigma0(a)
+___
+$code.=<<___	if ($i>=11);
+	str	@X[($i-8)&15],[sp,#`$SZ*(($i-8)%4)`]
+___
+# While ARMv8 specifies merged rotate-n-logical operation such as
+# 'eor x,y,z,ror#n', it was found to negatively affect performance
+# on Apple A7. The reason seems to be that it requires even 'y' to
+# be available earlier. This means that such merged instruction is
+# not necessarily best choice on critical path... On the other hand
+# Cortex-A5x handles merged instructions much better than disjoint
+# rotate and logical... See (**) footnote above.
+$code.=<<___	if ($i<15);
+	ror	$t0,$e,#$Sigma1[0]
+	add	$h,$h,$t2			// h+=K[i]
+	eor	$T0,$e,$e,ror#`$Sigma1[2]-$Sigma1[1]`
+	and	$t1,$f,$e
+	bic	$t2,$g,$e
+	add	$h,$h, at X[$i&15]			// h+=X[i]
+	orr	$t1,$t1,$t2			// Ch(e,f,g)
+	eor	$t2,$a,$b			// a^b, b^c in next round
+	eor	$t0,$t0,$T0,ror#$Sigma1[1]	// Sigma1(e)
+	ror	$T0,$a,#$Sigma0[0]
+	add	$h,$h,$t1			// h+=Ch(e,f,g)
+	eor	$t1,$a,$a,ror#`$Sigma0[2]-$Sigma0[1]`
+	add	$h,$h,$t0			// h+=Sigma1(e)
+	and	$t3,$t3,$t2			// (b^c)&=(a^b)
+	add	$d,$d,$h			// d+=h
+	eor	$t3,$t3,$b			// Maj(a,b,c)
+	eor	$t1,$T0,$t1,ror#$Sigma0[1]	// Sigma0(a)
+	add	$h,$h,$t3			// h+=Maj(a,b,c)
+	ldr	$t3,[$Ktbl],#$SZ		// *K++, $t2 in next round
+	//add	$h,$h,$t1			// h+=Sigma0(a)
+___
+$code.=<<___	if ($i>=15);
+	ror	$t0,$e,#$Sigma1[0]
+	add	$h,$h,$t2			// h+=K[i]
+	ror	$T1, at X[($j+1)&15],#$sigma0[0]
+	and	$t1,$f,$e
+	ror	$T2, at X[($j+14)&15],#$sigma1[0]
+	bic	$t2,$g,$e
+	ror	$T0,$a,#$Sigma0[0]
+	add	$h,$h, at X[$i&15]			// h+=X[i]
+	eor	$t0,$t0,$e,ror#$Sigma1[1]
+	eor	$T1,$T1, at X[($j+1)&15],ror#$sigma0[1]
+	orr	$t1,$t1,$t2			// Ch(e,f,g)
+	eor	$t2,$a,$b			// a^b, b^c in next round
+	eor	$t0,$t0,$e,ror#$Sigma1[2]	// Sigma1(e)
+	eor	$T0,$T0,$a,ror#$Sigma0[1]
+	add	$h,$h,$t1			// h+=Ch(e,f,g)
+	and	$t3,$t3,$t2			// (b^c)&=(a^b)
+	eor	$T2,$T2, at X[($j+14)&15],ror#$sigma1[1]
+	eor	$T1,$T1, at X[($j+1)&15],lsr#$sigma0[2]	// sigma0(X[i+1])
+	add	$h,$h,$t0			// h+=Sigma1(e)
+	eor	$t3,$t3,$b			// Maj(a,b,c)
+	eor	$t1,$T0,$a,ror#$Sigma0[2]	// Sigma0(a)
+	eor	$T2,$T2, at X[($j+14)&15],lsr#$sigma1[2]	// sigma1(X[i+14])
+	add	@X[$j], at X[$j], at X[($j+9)&15]
+	add	$d,$d,$h			// d+=h
+	add	$h,$h,$t3			// h+=Maj(a,b,c)
+	ldr	$t3,[$Ktbl],#$SZ		// *K++, $t2 in next round
+	add	@X[$j], at X[$j],$T1
+	add	$h,$h,$t1			// h+=Sigma0(a)
+	add	@X[$j], at X[$j],$T2
+___
+	($t2,$t3)=($t3,$t2);
+}
+
+$code.=<<___;
+#ifndef	__KERNEL__
+# include "arm_arch.h"
+#endif
+
+.text
+
+.extern	OPENSSL_armcap_P
+.globl	$func
+.type	$func,%function
+.align	6
+$func:
+___
+$code.=<<___	if ($SZ==4);
+#ifndef	__KERNEL__
+# ifdef	__ILP32__
+	ldrsw	x16,.LOPENSSL_armcap_P
+# else
+	ldr	x16,.LOPENSSL_armcap_P
+# endif
+	adr	x17,.LOPENSSL_armcap_P
+	add	x16,x16,x17
+	ldr	w16,[x16]
+	tst	w16,#ARMV8_SHA256
+	b.ne	.Lv8_entry
+	tst	w16,#ARMV7_NEON
+	b.ne	.Lneon_entry
+#endif
+___
+$code.=<<___;
+	stp	x29,x30,[sp,#-128]!
+	add	x29,sp,#0
+
+	stp	x19,x20,[sp,#16]
+	stp	x21,x22,[sp,#32]
+	stp	x23,x24,[sp,#48]
+	stp	x25,x26,[sp,#64]
+	stp	x27,x28,[sp,#80]
+	sub	sp,sp,#4*$SZ
+
+	ldp	$A,$B,[$ctx]				// load context
+	ldp	$C,$D,[$ctx,#2*$SZ]
+	ldp	$E,$F,[$ctx,#4*$SZ]
+	add	$num,$inp,$num,lsl#`log(16*$SZ)/log(2)`	// end of input
+	ldp	$G,$H,[$ctx,#6*$SZ]
+	adr	$Ktbl,.LK$BITS
+	stp	$ctx,$num,[x29,#96]
+
+.Loop:
+	ldp	@X[0], at X[1],[$inp],#2*$SZ
+	ldr	$t2,[$Ktbl],#$SZ			// *K++
+	eor	$t3,$B,$C				// magic seed
+	str	$inp,[x29,#112]
+___
+for ($i=0;$i<16;$i++)	{ &BODY_00_xx($i, at V); unshift(@V,pop(@V)); }
+$code.=".Loop_16_xx:\n";
+for (;$i<32;$i++)	{ &BODY_00_xx($i, at V); unshift(@V,pop(@V)); }
+$code.=<<___;
+	cbnz	$t2,.Loop_16_xx
+
+	ldp	$ctx,$num,[x29,#96]
+	ldr	$inp,[x29,#112]
+	sub	$Ktbl,$Ktbl,#`$SZ*($rounds+1)`		// rewind
+
+	ldp	@X[0], at X[1],[$ctx]
+	ldp	@X[2], at X[3],[$ctx,#2*$SZ]
+	add	$inp,$inp,#14*$SZ			// advance input pointer
+	ldp	@X[4], at X[5],[$ctx,#4*$SZ]
+	add	$A,$A, at X[0]
+	ldp	@X[6], at X[7],[$ctx,#6*$SZ]
+	add	$B,$B, at X[1]
+	add	$C,$C, at X[2]
+	add	$D,$D, at X[3]
+	stp	$A,$B,[$ctx]
+	add	$E,$E, at X[4]
+	add	$F,$F, at X[5]
+	stp	$C,$D,[$ctx,#2*$SZ]
+	add	$G,$G, at X[6]
+	add	$H,$H, at X[7]
+	cmp	$inp,$num
+	stp	$E,$F,[$ctx,#4*$SZ]
+	stp	$G,$H,[$ctx,#6*$SZ]
+	b.ne	.Loop
+
+	ldp	x19,x20,[x29,#16]
+	add	sp,sp,#4*$SZ
+	ldp	x21,x22,[x29,#32]
+	ldp	x23,x24,[x29,#48]
+	ldp	x25,x26,[x29,#64]
+	ldp	x27,x28,[x29,#80]
+	ldp	x29,x30,[sp],#128
+	ret
+.size	$func,.-$func
+
+.align	6
+.type	.LK$BITS,%object
+.LK$BITS:
+___
+$code.=<<___ if ($SZ==8);
+	.quad	0x428a2f98d728ae22,0x7137449123ef65cd
+	.quad	0xb5c0fbcfec4d3b2f,0xe9b5dba58189dbbc
+	.quad	0x3956c25bf348b538,0x59f111f1b605d019
+	.quad	0x923f82a4af194f9b,0xab1c5ed5da6d8118
+	.quad	0xd807aa98a3030242,0x12835b0145706fbe
+	.quad	0x243185be4ee4b28c,0x550c7dc3d5ffb4e2
+	.quad	0x72be5d74f27b896f,0x80deb1fe3b1696b1
+	.quad	0x9bdc06a725c71235,0xc19bf174cf692694
+	.quad	0xe49b69c19ef14ad2,0xefbe4786384f25e3
+	.quad	0x0fc19dc68b8cd5b5,0x240ca1cc77ac9c65
+	.quad	0x2de92c6f592b0275,0x4a7484aa6ea6e483
+	.quad	0x5cb0a9dcbd41fbd4,0x76f988da831153b5
+	.quad	0x983e5152ee66dfab,0xa831c66d2db43210
+	.quad	0xb00327c898fb213f,0xbf597fc7beef0ee4
+	.quad	0xc6e00bf33da88fc2,0xd5a79147930aa725
+	.quad	0x06ca6351e003826f,0x142929670a0e6e70
+	.quad	0x27b70a8546d22ffc,0x2e1b21385c26c926
+	.quad	0x4d2c6dfc5ac42aed,0x53380d139d95b3df
+	.quad	0x650a73548baf63de,0x766a0abb3c77b2a8
+	.quad	0x81c2c92e47edaee6,0x92722c851482353b
+	.quad	0xa2bfe8a14cf10364,0xa81a664bbc423001
+	.quad	0xc24b8b70d0f89791,0xc76c51a30654be30
+	.quad	0xd192e819d6ef5218,0xd69906245565a910
+	.quad	0xf40e35855771202a,0x106aa07032bbd1b8
+	.quad	0x19a4c116b8d2d0c8,0x1e376c085141ab53
+	.quad	0x2748774cdf8eeb99,0x34b0bcb5e19b48a8
+	.quad	0x391c0cb3c5c95a63,0x4ed8aa4ae3418acb
+	.quad	0x5b9cca4f7763e373,0x682e6ff3d6b2b8a3
+	.quad	0x748f82ee5defb2fc,0x78a5636f43172f60
+	.quad	0x84c87814a1f0ab72,0x8cc702081a6439ec
+	.quad	0x90befffa23631e28,0xa4506cebde82bde9
+	.quad	0xbef9a3f7b2c67915,0xc67178f2e372532b
+	.quad	0xca273eceea26619c,0xd186b8c721c0c207
+	.quad	0xeada7dd6cde0eb1e,0xf57d4f7fee6ed178
+	.quad	0x06f067aa72176fba,0x0a637dc5a2c898a6
+	.quad	0x113f9804bef90dae,0x1b710b35131c471b
+	.quad	0x28db77f523047d84,0x32caab7b40c72493
+	.quad	0x3c9ebe0a15c9bebc,0x431d67c49c100d4c
+	.quad	0x4cc5d4becb3e42b6,0x597f299cfc657e2a
+	.quad	0x5fcb6fab3ad6faec,0x6c44198c4a475817
+	.quad	0	// terminator
+___
+$code.=<<___ if ($SZ==4);
+	.long	0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5
+	.long	0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5
+	.long	0xd807aa98,0x12835b01,0x243185be,0x550c7dc3
+	.long	0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174
+	.long	0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc
+	.long	0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da
+	.long	0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7
+	.long	0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967
+	.long	0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13
+	.long	0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85
+	.long	0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3
+	.long	0xd192e819,0xd6990624,0xf40e3585,0x106aa070
+	.long	0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5
+	.long	0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3
+	.long	0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208
+	.long	0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2
+	.long	0	//terminator
+___
+$code.=<<___;
+.size	.LK$BITS,.-.LK$BITS
+#ifndef	__KERNEL__
+.align	3
+.LOPENSSL_armcap_P:
+# ifdef	__ILP32__
+	.long	OPENSSL_armcap_P-.
+# else
+	.quad	OPENSSL_armcap_P-.
+# endif
+#endif
+.asciz	"SHA$BITS block transform for ARMv8, CRYPTOGAMS by <appro\@openssl.org>"
+.align	2
+___
+
+if ($SZ==4) {
+my $Ktbl="x3";
+
+my ($ABCD,$EFGH,$abcd)=map("v$_.16b",(0..2));
+my @MSG=map("v$_.16b",(4..7));
+my ($W0,$W1)=("v16.4s","v17.4s");
+my ($ABCD_SAVE,$EFGH_SAVE)=("v18.16b","v19.16b");
+
+$code.=<<___;
+#ifndef	__KERNEL__
+.type	sha256_block_armv8,%function
+.align	6
+sha256_block_armv8:
+.Lv8_entry:
+	stp		x29,x30,[sp,#-16]!
+	add		x29,sp,#0
+
+	ld1.32		{$ABCD,$EFGH},[$ctx]
+	adr		$Ktbl,.LK256
+
+.Loop_hw:
+	ld1		{@MSG[0]- at MSG[3]},[$inp],#64
+	sub		$num,$num,#1
+	ld1.32		{$W0},[$Ktbl],#16
+	rev32		@MSG[0], at MSG[0]
+	rev32		@MSG[1], at MSG[1]
+	rev32		@MSG[2], at MSG[2]
+	rev32		@MSG[3], at MSG[3]
+	orr		$ABCD_SAVE,$ABCD,$ABCD		// offload
+	orr		$EFGH_SAVE,$EFGH,$EFGH
+___
+for($i=0;$i<12;$i++) {
+$code.=<<___;
+	ld1.32		{$W1},[$Ktbl],#16
+	add.i32		$W0,$W0, at MSG[0]
+	sha256su0	@MSG[0], at MSG[1]
+	orr		$abcd,$ABCD,$ABCD
+	sha256h		$ABCD,$EFGH,$W0
+	sha256h2	$EFGH,$abcd,$W0
+	sha256su1	@MSG[0], at MSG[2], at MSG[3]
+___
+	($W0,$W1)=($W1,$W0);	push(@MSG,shift(@MSG));
+}
+$code.=<<___;
+	ld1.32		{$W1},[$Ktbl],#16
+	add.i32		$W0,$W0, at MSG[0]
+	orr		$abcd,$ABCD,$ABCD
+	sha256h		$ABCD,$EFGH,$W0
+	sha256h2	$EFGH,$abcd,$W0
+
+	ld1.32		{$W0},[$Ktbl],#16
+	add.i32		$W1,$W1, at MSG[1]
+	orr		$abcd,$ABCD,$ABCD
+	sha256h		$ABCD,$EFGH,$W1
+	sha256h2	$EFGH,$abcd,$W1
+
+	ld1.32		{$W1},[$Ktbl]
+	add.i32		$W0,$W0, at MSG[2]
+	sub		$Ktbl,$Ktbl,#$rounds*$SZ-16	// rewind
+	orr		$abcd,$ABCD,$ABCD
+	sha256h		$ABCD,$EFGH,$W0
+	sha256h2	$EFGH,$abcd,$W0
+
+	add.i32		$W1,$W1, at MSG[3]
+	orr		$abcd,$ABCD,$ABCD
+	sha256h		$ABCD,$EFGH,$W1
+	sha256h2	$EFGH,$abcd,$W1
+
+	add.i32		$ABCD,$ABCD,$ABCD_SAVE
+	add.i32		$EFGH,$EFGH,$EFGH_SAVE
+
+	cbnz		$num,.Loop_hw
+
+	st1.32		{$ABCD,$EFGH},[$ctx]
+
+	ldr		x29,[sp],#16
+	ret
+.size	sha256_block_armv8,.-sha256_block_armv8
+#endif
+___
+}
+
+if ($SZ==4) {	######################################### NEON stuff #
+# You'll surely note a lot of similarities with sha256-armv4 module,
+# and of course it's not a coincidence. sha256-armv4 was used as
+# initial template, but was adapted for ARMv8 instruction set and
+# extensively re-tuned for all-round performance.
+
+my @V = ($A,$B,$C,$D,$E,$F,$G,$H) = map("w$_",(3..10));
+my ($t0,$t1,$t2,$t3,$t4) = map("w$_",(11..15));
+my $Ktbl="x16";
+my $Xfer="x17";
+my @X = map("q$_",(0..3));
+my ($T0,$T1,$T2,$T3,$T4,$T5,$T6,$T7) = map("q$_",(4..7,16..19));
+my $j=0;
+
+sub AUTOLOAD()          # thunk [simplified] x86-style perlasm
+{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; $opcode =~ s/_/\./;
+  my $arg = pop;
+    $arg = "#$arg" if ($arg*1 eq $arg);
+    $code .= "\t$opcode\t".join(',', at _,$arg)."\n";
+}
+
+sub Dscalar { shift =~ m|[qv]([0-9]+)|?"d$1":""; }
+sub Dlo     { shift =~ m|[qv]([0-9]+)|?"v$1.d[0]":""; }
+sub Dhi     { shift =~ m|[qv]([0-9]+)|?"v$1.d[1]":""; }
+
+sub Xupdate()
+{ use integer;
+  my $body = shift;
+  my @insns = (&$body,&$body,&$body,&$body);
+  my ($a,$b,$c,$d,$e,$f,$g,$h);
+
+	&ext_8		($T0, at X[0], at X[1],4);	# X[1..4]
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&ext_8		($T3, at X[2], at X[3],4);	# X[9..12]
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&mov		(&Dscalar($T7),&Dhi(@X[3]));	# X[14..15]
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&ushr_32	($T2,$T0,$sigma0[0]);
+	 eval(shift(@insns));
+	&ushr_32	($T1,$T0,$sigma0[2]);
+	 eval(shift(@insns));
+	&add_32 	(@X[0], at X[0],$T3);	# X[0..3] += X[9..12]
+	 eval(shift(@insns));
+	&sli_32		($T2,$T0,32-$sigma0[0]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&ushr_32	($T3,$T0,$sigma0[1]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&eor_8		($T1,$T1,$T2);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&sli_32		($T3,$T0,32-$sigma0[1]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &ushr_32	($T4,$T7,$sigma1[0]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&eor_8		($T1,$T1,$T3);		# sigma0(X[1..4])
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &sli_32	($T4,$T7,32-$sigma1[0]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &ushr_32	($T5,$T7,$sigma1[2]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &ushr_32	($T3,$T7,$sigma1[1]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&add_32		(@X[0], at X[0],$T1);	# X[0..3] += sigma0(X[1..4])
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &sli_u32	($T3,$T7,32-$sigma1[1]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &eor_8	($T5,$T5,$T4);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &eor_8	($T5,$T5,$T3);		# sigma1(X[14..15])
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&add_32		(@X[0], at X[0],$T5);	# X[0..1] += sigma1(X[14..15])
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &ushr_32	($T6, at X[0],$sigma1[0]);
+	 eval(shift(@insns));
+	  &ushr_32	($T7, at X[0],$sigma1[2]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &sli_32	($T6, at X[0],32-$sigma1[0]);
+	 eval(shift(@insns));
+	  &ushr_32	($T5, at X[0],$sigma1[1]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &eor_8	($T7,$T7,$T6);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &sli_32	($T5, at X[0],32-$sigma1[1]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&ld1_32		("{$T0}","[$Ktbl], #16");
+	 eval(shift(@insns));
+	  &eor_8	($T7,$T7,$T5);		# sigma1(X[16..17])
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&eor_8		($T5,$T5,$T5);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&mov		(&Dhi($T5), &Dlo($T7));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&add_32		(@X[0], at X[0],$T5);	# X[2..3] += sigma1(X[16..17])
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&add_32		($T0,$T0, at X[0]);
+	 while($#insns>=1) { eval(shift(@insns)); }
+	&st1_32		("{$T0}","[$Xfer], #16");
+	 eval(shift(@insns));
+
+	push(@X,shift(@X));		# "rotate" X[]
+}
+
+sub Xpreload()
+{ use integer;
+  my $body = shift;
+  my @insns = (&$body,&$body,&$body,&$body);
+  my ($a,$b,$c,$d,$e,$f,$g,$h);
+
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&ld1_8		("{@X[0]}","[$inp],#16");
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&ld1_32		("{$T0}","[$Ktbl],#16");
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&rev32		(@X[0], at X[0]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&add_32		($T0,$T0, at X[0]);
+	 foreach (@insns) { eval; }	# remaining instructions
+	&st1_32		("{$T0}","[$Xfer], #16");
+
+	push(@X,shift(@X));		# "rotate" X[]
+}
+
+sub body_00_15 () {
+	(
+	'($a,$b,$c,$d,$e,$f,$g,$h)=@V;'.
+	'&add	($h,$h,$t1)',			# h+=X[i]+K[i]
+	'&add	($a,$a,$t4);'.			# h+=Sigma0(a) from the past
+	'&and	($t1,$f,$e)',
+	'&bic	($t4,$g,$e)',
+	'&eor	($t0,$e,$e,"ror#".($Sigma1[1]-$Sigma1[0]))',
+	'&add	($a,$a,$t2)',			# h+=Maj(a,b,c) from the past
+	'&orr	($t1,$t1,$t4)',			# Ch(e,f,g)
+	'&eor	($t0,$t0,$e,"ror#".($Sigma1[2]-$Sigma1[0]))',	# Sigma1(e)
+	'&eor	($t4,$a,$a,"ror#".($Sigma0[1]-$Sigma0[0]))',
+	'&add	($h,$h,$t1)',			# h+=Ch(e,f,g)
+	'&ror	($t0,$t0,"#$Sigma1[0]")',
+	'&eor	($t2,$a,$b)',			# a^b, b^c in next round
+	'&eor	($t4,$t4,$a,"ror#".($Sigma0[2]-$Sigma0[0]))',	# Sigma0(a)
+	'&add	($h,$h,$t0)',			# h+=Sigma1(e)
+	'&ldr	($t1,sprintf "[sp,#%d]",4*(($j+1)&15))	if (($j&15)!=15);'.
+	'&ldr	($t1,"[$Ktbl]")				if ($j==15);'.
+	'&and	($t3,$t3,$t2)',			# (b^c)&=(a^b)
+	'&ror	($t4,$t4,"#$Sigma0[0]")',
+	'&add	($d,$d,$h)',			# d+=h
+	'&eor	($t3,$t3,$b)',			# Maj(a,b,c)
+	'$j++;	unshift(@V,pop(@V)); ($t2,$t3)=($t3,$t2);'
+	)
+}
+
+$code.=<<___;
+#ifdef	__KERNEL__
+.globl	sha256_block_neon
+#endif
+.type	sha256_block_neon,%function
+.align	4
+sha256_block_neon:
+.Lneon_entry:
+	stp	x29, x30, [sp, #-16]!
+	mov	x29, sp
+	sub	sp,sp,#16*4
+
+	adr	$Ktbl,.LK256
+	add	$num,$inp,$num,lsl#6	// len to point at the end of inp
+
+	ld1.8	{@X[0]},[$inp], #16
+	ld1.8	{@X[1]},[$inp], #16
+	ld1.8	{@X[2]},[$inp], #16
+	ld1.8	{@X[3]},[$inp], #16
+	ld1.32	{$T0},[$Ktbl], #16
+	ld1.32	{$T1},[$Ktbl], #16
+	ld1.32	{$T2},[$Ktbl], #16
+	ld1.32	{$T3},[$Ktbl], #16
+	rev32	@X[0], at X[0]		// yes, even on
+	rev32	@X[1], at X[1]		// big-endian
+	rev32	@X[2], at X[2]
+	rev32	@X[3], at X[3]
+	mov	$Xfer,sp
+	add.32	$T0,$T0, at X[0]
+	add.32	$T1,$T1, at X[1]
+	add.32	$T2,$T2, at X[2]
+	st1.32	{$T0-$T1},[$Xfer], #32
+	add.32	$T3,$T3, at X[3]
+	st1.32	{$T2-$T3},[$Xfer]
+	sub	$Xfer,$Xfer,#32
+
+	ldp	$A,$B,[$ctx]
+	ldp	$C,$D,[$ctx,#8]
+	ldp	$E,$F,[$ctx,#16]
+	ldp	$G,$H,[$ctx,#24]
+	ldr	$t1,[sp,#0]
+	mov	$t2,wzr
+	eor	$t3,$B,$C
+	mov	$t4,wzr
+	b	.L_00_48
+
+.align	4
+.L_00_48:
+___
+	&Xupdate(\&body_00_15);
+	&Xupdate(\&body_00_15);
+	&Xupdate(\&body_00_15);
+	&Xupdate(\&body_00_15);
+$code.=<<___;
+	cmp	$t1,#0				// check for K256 terminator
+	ldr	$t1,[sp,#0]
+	sub	$Xfer,$Xfer,#64
+	bne	.L_00_48
+
+	sub	$Ktbl,$Ktbl,#256		// rewind $Ktbl
+	cmp	$inp,$num
+	mov	$Xfer, #64
+	csel	$Xfer, $Xfer, xzr, eq
+	sub	$inp,$inp,$Xfer			// avoid SEGV
+	mov	$Xfer,sp
+___
+	&Xpreload(\&body_00_15);
+	&Xpreload(\&body_00_15);
+	&Xpreload(\&body_00_15);
+	&Xpreload(\&body_00_15);
+$code.=<<___;
+	add	$A,$A,$t4			// h+=Sigma0(a) from the past
+	ldp	$t0,$t1,[$ctx,#0]
+	add	$A,$A,$t2			// h+=Maj(a,b,c) from the past
+	ldp	$t2,$t3,[$ctx,#8]
+	add	$A,$A,$t0			// accumulate
+	add	$B,$B,$t1
+	ldp	$t0,$t1,[$ctx,#16]
+	add	$C,$C,$t2
+	add	$D,$D,$t3
+	ldp	$t2,$t3,[$ctx,#24]
+	add	$E,$E,$t0
+	add	$F,$F,$t1
+	 ldr	$t1,[sp,#0]
+	stp	$A,$B,[$ctx,#0]
+	add	$G,$G,$t2
+	 mov	$t2,wzr
+	stp	$C,$D,[$ctx,#8]
+	add	$H,$H,$t3
+	stp	$E,$F,[$ctx,#16]
+	 eor	$t3,$B,$C
+	stp	$G,$H,[$ctx,#24]
+	 mov	$t4,wzr
+	 mov	$Xfer,sp
+	b.ne	.L_00_48
+
+	ldr	x29,[x29]
+	add	sp,sp,#16*4+16
+	ret
+.size	sha256_block_neon,.-sha256_block_neon
+___
+}
+
+$code.=<<___;
+#ifndef	__KERNEL__
+.comm	OPENSSL_armcap_P,4,4
+#endif
+___
+
+{   my  %opcode = (
+	"sha256h"	=> 0x5e004000,	"sha256h2"	=> 0x5e005000,
+	"sha256su0"	=> 0x5e282800,	"sha256su1"	=> 0x5e006000	);
+
+    sub unsha256 {
+	my ($mnemonic,$arg)=@_;
+
+	$arg =~ m/[qv]([0-9]+)[^,]*,\s*[qv]([0-9]+)[^,]*(?:,\s*[qv]([0-9]+))?/o
+	&&
+	sprintf ".inst\t0x%08x\t//%s %s",
+			$opcode{$mnemonic}|$1|($2<<5)|($3<<16),
+			$mnemonic,$arg;
+    }
+}
+
+open SELF,$0;
+while(<SELF>) {
+        next if (/^#!/);
+        last if (!s/^#/\/\// and !/^$/);
+        print;
+}
+close SELF;
+
+foreach(split("\n",$code)) {
+
+	s/\`([^\`]*)\`/eval($1)/ge;
+
+	s/\b(sha256\w+)\s+([qv].*)/unsha256($1,$2)/ge;
+
+	s/\bq([0-9]+)\b/v$1.16b/g;		# old->new registers
+
+	s/\.[ui]?8(\s)/$1/;
+	s/\.\w?32\b//		and s/\.16b/\.4s/g;
+	m/(ld|st)1[^\[]+\[0\]/	and s/\.4s/\.s/g;
+
+	print $_,"\n";
+}
+
+close STDOUT;
diff --git a/arch/arm64/crypto/sha512-glue.c b/arch/arm64/crypto/sha512-glue.c
new file mode 100644
index 000000000000..aff35c9992a4
--- /dev/null
+++ b/arch/arm64/crypto/sha512-glue.c
@@ -0,0 +1,94 @@
+/*
+ * Linux/arm64 port of the OpenSSL SHA512 implementation for AArch64
+ *
+ * Copyright (c) 2016 Linaro Ltd. <ard.biesheuvel at linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+
+#include <crypto/internal/hash.h>
+#include <linux/cryptohash.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <crypto/sha.h>
+#include <crypto/sha512_base.h>
+#include <asm/neon.h>
+
+MODULE_DESCRIPTION("SHA-384/SHA-512 secure hash for arm64");
+MODULE_AUTHOR("Andy Polyakov <appro at openssl.org>");
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel at linaro.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_CRYPTO("sha384");
+MODULE_ALIAS_CRYPTO("sha512");
+
+asmlinkage void sha512_block_data_order(u32 *digest, const void *data,
+					unsigned int num_blks);
+
+static int sha512_update(struct shash_desc *desc, const u8 *data,
+			 unsigned int len)
+{
+	return sha512_base_do_update(desc, data, len,
+			(sha512_block_fn *)sha512_block_data_order);
+}
+
+static int sha512_finup(struct shash_desc *desc, const u8 *data,
+			unsigned int len, u8 *out)
+{
+	if (len)
+		sha512_base_do_update(desc, data, len,
+			(sha512_block_fn *)sha512_block_data_order);
+	sha512_base_do_finalize(desc,
+			(sha512_block_fn *)sha512_block_data_order);
+
+	return sha512_base_finish(desc, out);
+}
+
+static int sha512_final(struct shash_desc *desc, u8 *out)
+{
+	return sha512_finup(desc, NULL, 0, out);
+}
+
+static struct shash_alg algs[] = { {
+	.digestsize		= SHA512_DIGEST_SIZE,
+	.init			= sha512_base_init,
+	.update			= sha512_update,
+	.final			= sha512_final,
+	.finup			= sha512_finup,
+	.descsize		= sizeof(struct sha512_state),
+	.base.cra_name		= "sha512",
+	.base.cra_driver_name	= "sha512-arm64",
+	.base.cra_priority	= 150,
+	.base.cra_flags		= CRYPTO_ALG_TYPE_SHASH,
+	.base.cra_blocksize	= SHA512_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+}, {
+	.digestsize		= SHA384_DIGEST_SIZE,
+	.init			= sha384_base_init,
+	.update			= sha512_update,
+	.final			= sha512_final,
+	.finup			= sha512_finup,
+	.descsize		= sizeof(struct sha512_state),
+	.base.cra_name		= "sha384",
+	.base.cra_driver_name	= "sha384-arm64",
+	.base.cra_priority	= 150,
+	.base.cra_flags		= CRYPTO_ALG_TYPE_SHASH,
+	.base.cra_blocksize	= SHA384_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+} };
+
+static int __init sha512_mod_init(void)
+{
+	return crypto_register_shashes(algs, ARRAY_SIZE(algs));
+}
+
+static void __exit sha512_mod_fini(void)
+{
+	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
+}
+
+module_init(sha512_mod_init);
+module_exit(sha512_mod_fini);
-- 
2.7.4




More information about the linux-arm-kernel mailing list