[PATCH v9 00/10] MT2701 DRM support
YT Shen
yt.shen at mediatek.com
Fri Nov 11 03:55:36 PST 2016
This is MT2701 DRM support PATCH v9, based on 4.9-rc1.
We add DSI interrupt control, transfer function for MIPI DSI panel support.
Most codes are the same, except some register changed.
For example:
- DISP_OVL address offset changed, color format definition changed.
- DISP_RDMA fifo size changed.
- DISP_COLOR offset changed.
- MIPI_TX setting changed.
We add a new component DDP_COMPONENT_BLS, and the connections are updated.
OVL -> RDMA -> COLOR -> BLS -> DSI
RDMA -> DPI
And we have shadow register support in MT2701.
We remove dts patch from the patch series, which depends on MT2701 CCF and scpsys.
Changes since v8:
- enable 3 DSI interrupts only
- move mtk_dsi_wait_for_irq_done() to the patch of irq control
- use the name BLS in DRM driver part
- move BLS declaration to a separate patch
- update mtk_dsi_switch_to_cmd_mode()
- update mtk_output_dsi_enable() and mtk_output_dsi_disable()
Changes since v7:
- Remove redundant codes
- Move the definition of DDP_COMPONENT_BLS to patch of "drm/mediatek: update display module connections"
- Move _dsi_irq_wait_queue into platform driver data
- Move mtk_dsi_irq_data_clear() to patch of "drm/mediatek: add dsi interrupt control"
- Add more descriptions in the commit messages
Changes since v6:
- Change data type of irq_data to u32
- Rewrite mtk_dsi_host_transfer() for simplify
- Move some MIPI_TX config to patch of "drm/mediatek: add *driver_data for different hardware settings".
- Remove device tree from this patch series
Changes since v5:
- Remove DPI device tree and compatible string
- Use one wait queue to handle interrupt status
- Update the interrupt check flow and DSI_INT_ALL_BITS
- Use same function for host read/write command
- various fixes
Changes since v4:
- Add messages when timeout in mtk_disp_mutex_acquire()
- Add descriptions for DISP_REG_MUTEX registers
- Move connection settings for display modules to a separate patch
- Remove 'mt2701-disp-wdma' because it is unused
- Move cleaning up and renaming to a separate patch
- Use wait_event_interruptible_timeout() to replace polling
- Remove irq_num from mtk_dsi structure
- Remove redundant and debug codes
Changes since v3:
- Add DSI support for MIPI DSI panels
- Update BLS binding to PWM nodes
- Remove ufoe device nodes
- Remove redundant parentheses
- Remove global variable initialization
Changes since v2:
- Rename mtk_ddp_mux_sel to mtk_ddp_sout_sel
- Update mt2701_mtk_ddp_ext components
- Changed to prefix naming
- Reorder the patch series
- Use of_device_get_match_data() to get driver private data
- Use iopoll macros to implement mtk_disp_mutex_acquire()
- Removed empty device tree nodes
Changes since v1:
- Removed BLS bindings and codes, which belong to pwm driver
- Moved mtk_disp_mutex_acquire() just before mtk_crtc_ddp_config()
- Split patch into smaller parts
- Added const keyword to constant structure
- Removed codes for special memory align
Thanks,
yt.shen
YT Shen (8):
drm/mediatek: rename macros, add chip prefix
drm/mediatek: add *driver_data for different hardware settings
drm/mediatek: add shadow register support
drm/mediatek: add BLS component
drm/mediatek: update display module connections
drm/mediatek: cleaning up and refine
drm/mediatek: update DSI sub driver flow for sending commands to panel
drm/mediatek: add support for Mediatek SoC MT2701
shaoming chen (2):
drm/mediatek: add dsi interrupt control
drm/mediatek: add dsi transfer function
drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 33 ++-
drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 17 +-
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 76 +++--
drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 138 ++++++---
drivers/gpu/drm/mediatek/mtk_drm_ddp.h | 2 +
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 38 ++-
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 15 +
drivers/gpu/drm/mediatek/mtk_drm_drv.c | 54 +++-
drivers/gpu/drm/mediatek/mtk_drm_drv.h | 9 +
drivers/gpu/drm/mediatek/mtk_dsi.c | 429 ++++++++++++++++++++++++----
drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 70 +++--
11 files changed, 715 insertions(+), 166 deletions(-)
--
1.9.1
More information about the linux-arm-kernel
mailing list