[PATCH v5 00/23] Support qcom's HSIC USB and rewrite USB2 HS support

[Peter Chen]

On Tue, Oct 18, 2016 at 01:51:39PM -0700, Stephen Boyd wrote:
> Quoting Peter Chen (2016-10-18 02:31:40)
> > On Mon, Oct 17, 2016 at 06:56:13PM -0700, Stephen Boyd wrote:
> > > I've also sent separate patches for other minor pieces to make this
> > > all work. The full tree can be found here[2], hacks and all to get
> > > things working. I've tested this on the db410c, apq8074 dragonboard,
> > > and ifc6410 with configfs gadgets and otg cables.
> > > 
> > > Patches based on v4.8-rc1
> 
> Oops should be v4.9-rc1 here.
> 
> > > 
> > > Changes from v4:
> > >  * Picked up Acks from Rob
> > >  * Updated HS phy init sequence DT property to restrict it to offsets
> > 
> > I remembered that you got all my acks for chipidea patches, right? I did
> > not check for this series.
> 
> Sorry I've added in one more patch
> 
>    usb: chipidea: Emulate OTGSC interrupt enable path
> 
> to fix extcon interrupt emulation even further.
> 
> > 
> > Besides, the patch "gpu: Remove depends on RESET_CONTROLLER when not a
> > provider" [1]  still not be accepted, I need this patch to be merged
> > first, then apply your chipidea part, otherwise, there is a building
> > warning.
> > 
> > [1] https://patchwork.kernel.org/patch/9322583/
> 
> Yes, I'm going to resend that patch now. I hope that David will apply it
> for -rc2.

Stephen, just a mind. I have rebased Greg's usb-next tree (v4.9-rc3 on
it), your GPU fix is still not there.

-- 

Best Regards,
Peter Chen