[PATCH 04/14] ARM: dts: armada-375: Fixup bootrom DT warning

[Gregory CLEMENT]

Hi Thomas,
 
 On jeu., nov. 10 2016, Thomas Petazzoni <thomas.petazzoni at free-electrons.com> wrote:

> Hello,
>
> On Thu, 10 Nov 2016 01:09:50 +0100, Gregory CLEMENT wrote:
>
>> -		bootrom {
>> +		bootrom at 0 {
>>  			compatible = "marvell,bootrom";
>>  			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
>
> I am still not sure whether this "0" unit address is correct compared
> to the reg property being passed.

I chose to use the adress register inside the window memory.

>
> A good example of why I'm worried is the sa-sram case:
>
> +		crypto_sram0: sa-sram0 at 0 {
>  			compatible = "mmio-sram";
>  			reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
>
> +		crypto_sram1: sa-sram1 at 0 {
>  			compatible = "mmio-sram";
>  			reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
>
> The node names should be just "sram" without a number. Indeed for UARTs
> for example, you use uart at XYZ, uart at ABC and not uart0 at XYZ and
> uart1 at ABC. But then, if you do that, with your scheme, you end up with
> both nodes named sa-sram at 0.
>
> Which clearly shows that the way you set this unit-address is not
> correct: those two devices are mapped at completely different
> locations, but you end up with an identical unit address.
>
> I have no idea what is the rule for setting the unit address in this
> case, but I'm pretty sure the rule you've chosen is not good.

I don't know if there is an existing rules for this case. But I see your
concern. What I propose then is to expose the memory windows ID by
adding the target and the attributes like this:

		crypto_sram0: sa-sram at 09_09_0 {
 			compatible = "mmio-sram";
  			reg = <MBUS_ID(0x09, 0x09) 0 0x800>;


		crypto_sram1: sa-sram at 09_05_0 {
  			compatible = "mmio-sram";
  			reg = <MBUS_ID(0x09, 0x05) 0 0x800>;

Gregory

>
> Best regards,
>
> Thomas
> -- 
> Thomas Petazzoni, CTO, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com