[PATCH] ARM: dts: socfpga: add nand controller nodes
Steffen Trumtrar
s.trumtrar at pengutronix.de
Thu Nov 10 00:39:43 PST 2016
On Wed, Nov 09, 2016 at 12:48:21PM -0600, Dinh Nguyen wrote:
>
>
> On 11/09/2016 01:35 AM, Steffen Trumtrar wrote:
> > Add the denali nand controller to the socfpga dtsi.
> >
> > Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
> > ---
> > arch/arm/boot/dts/socfpga.dtsi | 13 +++++++++++++
> > 1 file changed, 13 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
> > index 9f48141270b8..6b0c23ca5e88 100644
> > --- a/arch/arm/boot/dts/socfpga.dtsi
> > +++ b/arch/arm/boot/dts/socfpga.dtsi
> > @@ -700,6 +700,19 @@
> > status = "disabled";
> > };
> >
> > + nand0: nand at ff900000 {
> > + #address-cells = <0x1>;
> > + #size-cells = <0x1>;
> > + compatible = "denali,denali-nand-dt";
> > + reg = <0xff900000 0x100000>,
> > + <0xffb80000 0x10000>;
> > + reg-names = "nand_data", "denali_reg";
> > + interrupts = <0x0 0x90 0x4>;
> > + dma-mask = <0xffffffff>;
> > + clocks = <&nand_clk>;
> > + status = "disabled";
> > + };
> > +
> > ocram: sram at ffff0000 {
> > compatible = "mmio-sram";
> > reg = <0xffff0000 0x10000>;
> >
>
> Since there's only 1 NAND node, do we need to call the node "nand0"? No
> need to resend a patch, I can change it locally if we agree that the
> node should be just:
>
> nand: nand at ff900000
>
Okay with me. Go ahead.
Thanks,
Steffen
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the linux-arm-kernel
mailing list