[PATCH 2/2] ARM: dts: apq8064: add support to pm8821
Bjorn Andersson
bjorn.andersson at linaro.org
Tue Nov 8 11:13:43 PST 2016
On Tue 08 Nov 08:29 PST 2016, Srinivas Kandagatla wrote:
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
> ---
> arch/arm/boot/dts/qcom-apq8064.dtsi | 28 ++++++++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
> index 1dbe697..fde006c 100644
> --- a/arch/arm/boot/dts/qcom-apq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
> @@ -627,6 +627,34 @@
> clock-names = "core";
> };
>
> + qcom,ssbi at c00000 {
No "qcom," in the node name.
> + compatible = "qcom,ssbi";
> + reg = <0x00c00000 0x1000>;
> + qcom,controller-type = "pmic-arbiter";
> +
> + pmicintc2: pmic at 1 {
I think we should follow Linus' lead and label this "pm8821".
> + compatible = "qcom,pm8821";
> + interrupt-parent = <&tlmm_pinmux>;
> + interrupts = <76 8>;
Please spell out IRQ_TYPE_LEVEL_LOW.
And interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW> combines
the two lines nicely.
> + #interrupt-cells = <2>;
> + interrupt-controller;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pm8821_mpps: mpps at 50 {
> +
Extra newline.
> + compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
> + reg = <0x50>;
> +
> + interrupts = <24 1>, <25 1>, <26 1>,
> + <27 1>;
I think these should be IRQ_TYPE_NONE per the discussion on how to share
interrupts between the gpio/mpp driver and other clients.
On the other hand, per the pm8821 driver we only support LEVEL_LOW
(high?).
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> + };
> + };
> +
Regards,
Bjorn
More information about the linux-arm-kernel
mailing list