[PATCH RFC 00/12] tda998x updates

Robin Murphy robin.murphy at arm.com
Tue Nov 8 07:25:45 PST 2016


On 08/11/16 13:34, Russell King - ARM Linux wrote:
> On Tue, Nov 08, 2016 at 01:32:15PM +0000, Russell King - ARM Linux wrote:
>> Unfortunately, my drm-tda998x-devel branch is slightly out of date with
>> these patches it's the original set of 10 patches.  I've not pushed
>> these ones out to that branch yet, as I've three additional patches on
>> top of these which aren't "ready" for pushing out.
> 
> Here's the delta between the branch and what I just posted:

Great, thanks. I committed that on top and my framebuffer console over
DVI is still working. I'm dubious that it's thorough enough to have
value (sadly I have neither the time nor the motivation to fight with
HDMI and I2S audio), but feel free to consider that a tested-by if you wish.

Robin.

> 
> diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
> index 1b262a89b7e1..3a5e5c466972 100644
> --- a/drivers/gpu/drm/i2c/tda998x_drv.c
> +++ b/drivers/gpu/drm/i2c/tda998x_drv.c
> @@ -43,12 +43,12 @@ struct tda998x_priv {
>  	u16 rev;
>  	u8 current_page;
>  	bool is_on;
> -	bool is_hdmi_sink;
> -	bool is_hdmi_config;
> +	bool supports_infoframes;
> +	bool sink_has_audio;
>  	u8 vip_cntrl_0;
>  	u8 vip_cntrl_1;
>  	u8 vip_cntrl_2;
> -	unsigned long tdms_clock;
> +	unsigned long tmds_clock;
>  	struct tda998x_audio_params audio_params;
>  
>  	struct platform_device *audio_pdev;
> @@ -774,7 +774,7 @@ tda998x_configure_audio(struct tda998x_priv *priv,
>  	 * assume 100MHz requires larger divider.
>  	 */
>  	adiv = AUDIO_DIV_SERCLK_8;
> -	if (priv->tdms_clock > 100000)
> +	if (priv->tmds_clock > 100000)
>  		adiv++;			/* AUDIO_DIV_SERCLK_16 */
>  
>  	/* S/PDIF asks for a larger divider */
> @@ -869,8 +869,7 @@ static int tda998x_audio_hw_params(struct device *dev, void *data,
>  	}
>  
>  	mutex_lock(&priv->audio_mutex);
> -	/* We must not program the TDA998x for audio if the sink is DVI. */
> -	if (priv->is_hdmi_config)
> +	if (priv->supports_infoframes && priv->sink_has_audio)
>  		ret = tda998x_configure_audio(priv, &audio);
>  	else
>  		ret = 0;
> @@ -962,6 +961,27 @@ static int tda998x_connector_dpms(struct drm_connector *connector, int mode)
>  		return drm_helper_connector_dpms(connector, mode);
>  }
>  
> +static int tda998x_connector_fill_modes(struct drm_connector *connector,
> +					uint32_t maxX, uint32_t maxY)
> +{
> +	struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
> +	int ret;
> +
> +	mutex_lock(&priv->audio_mutex);
> +	ret = drm_helper_probe_single_connector_modes(connector, maxX, maxY);
> +
> +	if (connector->edid_blob_ptr) {
> +		struct edid *edid = (void *)connector->edid_blob_ptr->data;
> +
> +		priv->sink_has_audio = drm_detect_monitor_audio(edid);
> +	} else {
> +		priv->sink_has_audio = false;
> +	}
> +	mutex_unlock(&priv->audio_mutex);
> +
> +	return ret;
> +}
> +
>  static enum drm_connector_status
>  tda998x_connector_detect(struct drm_connector *connector, bool force)
>  {
> @@ -980,7 +1000,7 @@ static void tda998x_connector_destroy(struct drm_connector *connector)
>  static const struct drm_connector_funcs tda998x_connector_funcs = {
>  	.dpms = tda998x_connector_dpms,
>  	.reset = drm_atomic_helper_connector_reset,
> -	.fill_modes = drm_helper_probe_single_connector_modes,
> +	.fill_modes = tda998x_connector_fill_modes,
>  	.detect = tda998x_connector_detect,
>  	.destroy = tda998x_connector_destroy,
>  	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> @@ -1072,11 +1092,7 @@ static int tda998x_connector_get_modes(struct drm_connector *connector)
>  
>  	drm_mode_connector_update_edid_property(connector, edid);
>  	n = drm_add_edid_modes(connector, edid);
> -	priv->is_hdmi_sink = drm_detect_hdmi_monitor(edid);
> -
> -	mutex_lock(&priv->audio_mutex);
>  	drm_edid_to_eld(connector, edid);
> -	mutex_unlock(&priv->audio_mutex);
>  
>  	kfree(edid);
>  
> @@ -1350,8 +1366,22 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
>  	/* must be last register set: */
>  	reg_write(priv, REG_TBG_CNTRL_0, 0);
>  
> -	/* Only setup the info frames if the sink is HDMI */
> -	if (priv->is_hdmi_sink) {
> +	priv->tmds_clock = adjusted_mode->clock;
> +
> +	/* CEA-861B section 6 says that:
> +	 * CEA version 1 (CEA-861) has no support for infoframes.
> +	 * CEA version 2 (CEA-861A) supports version 1 AVI infoframes,
> +	 * and optional basic audio.
> +	 * CEA version 3 (CEA-861B) supports version 1 and 2 AVI infoframes,
> +	 * and optional digital audio, with audio infoframes.
> +	 *
> +	 * Since we only support generation of version 2 AVI infoframes,
> +	 * ignore CEA version 2 and below (iow, behave as if we're a
> +	 * CEA-861 source.)
> +	 */
> +	priv->supports_infoframes = priv->connector.display_info.cea_rev >= 3;
> +
> +	if (priv->supports_infoframes) {
>  		/* We need to turn HDMI HDCP stuff on to get audio through */
>  		reg &= ~TBG_CNTRL_1_DWIN_DIS;
>  		reg_write(priv, REG_TBG_CNTRL_1, reg);
> @@ -1360,13 +1390,11 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
>  
>  		tda998x_write_avi(priv, adjusted_mode);
>  
> -		priv->tdms_clock = adjusted_mode->clock;
> -
> -		if (priv->audio_params.format != AFMT_UNUSED)
> +		if (priv->audio_params.format != AFMT_UNUSED &&
> +		    priv->sink_has_audio)
>  			tda998x_configure_audio(priv, &priv->audio_params);
>  	}
>  
> -	priv->is_hdmi_config = priv->is_hdmi_sink;
>  	mutex_unlock(&priv->audio_mutex);
>  }
>  
> 
> 




More information about the linux-arm-kernel mailing list