[PATCH v6 7/7] arm64: dts: NS2: add AMAC ethernet support

[Sergei Shtylyov]

On 11/4/2016 7:30 PM, Jon Mason wrote:

>>> Add support for the AMAC ethernet to the Broadcom Northstar2 SoC device
>>> tree
>>>
>>> Signed-off-by: Jon Mason <jon.mason at broadcom.com>
>>> ---
>>> arch/arm64/boot/dts/broadcom/ns2-svk.dts |  5 +++++
>>> arch/arm64/boot/dts/broadcom/ns2.dtsi    | 12 ++++++++++++
>>> 2 files changed, 17 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
>>> index b09f3bc..c4d5442 100644
>>> --- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts
>>> +++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
>>> @@ -56,6 +56,10 @@
>>> 	};
>>> };
>>>
>>> +&enet {
>>> +	status = "ok";
>>
>>    The spec dictates it should be "okay" (although "ok" is also recognized).
>
> The rest of the file uses "ok".  So, the addition above is consistent
> with the other entries.
>
> Perhaps a patch outside this series to convert the entire file from
> "ok" to "okay" would be acceptable to you.

    OK, it would...

>
> Thanks,
> Jon

MBR, Sergei