[PATCH 2/2] i2c: uniphier-f: rename jump label to follow coding style guideline

[Masahiro Yamada]

Documentation/CodingStyle recommends to use label names which say
what the goto does or why the goto exists.

Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---

 drivers/i2c/busses/i2c-uniphier-f.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c
index b54448e..a154cc9 100644
--- a/drivers/i2c/busses/i2c-uniphier-f.c
+++ b/drivers/i2c/busses/i2c-uniphier-f.c
@@ -528,7 +528,7 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
 	if (!clk_rate) {
 		dev_err(dev, "input clock rate should not be zero\n");
 		ret = -EINVAL;
-		goto err;
+		goto disable_clk;
 	}
 
 	init_completion(&priv->comp);
@@ -547,11 +547,11 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
 			       pdev->name, priv);
 	if (ret) {
 		dev_err(dev, "failed to request irq %d\n", irq);
-		goto err;
+		goto disable_clk;
 	}
 
 	ret = i2c_add_adapter(&priv->adap);
-err:
+disable_clk:
 	if (ret)
 		clk_disable_unprepare(priv->clk);
 
-- 
1.9.1