[PATCH v1] iio: adc: at91: add suspend and resume callback
Ludovic Desroches
ludovic.desroches at atmel.com
Wed Nov 2 01:36:06 PDT 2016
On Wed, Nov 02, 2016 at 10:40:16AM +0800, Wenyou Yang wrote:
> Add suspend/resume callback, support the pinctrl sleep state when
> the system suspend as well.
>
> Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>
> ---
>
> drivers/iio/adc/at91_adc.c | 35 +++++++++++++++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
>
> diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
> index bbdac07..ffa81a1 100644
> --- a/drivers/iio/adc/at91_adc.c
> +++ b/drivers/iio/adc/at91_adc.c
> @@ -30,6 +30,7 @@
> #include <linux/iio/trigger.h>
> #include <linux/iio/trigger_consumer.h>
> #include <linux/iio/triggered_buffer.h>
> +#include <linux/pinctrl/consumer.h>
>
> /* Registers */
> #define AT91_ADC_CR 0x00 /* Control Register */
> @@ -1347,6 +1348,39 @@ static int at91_adc_remove(struct platform_device *pdev)
> return 0;
> }
>
> +#ifdef CONFIG_PM
I would use CONFIG_PM_SLEEP
> +static int at91_adc_suspend(struct device *dev)
> +{
> + struct iio_dev *idev = platform_get_drvdata(to_platform_device(dev));
> + struct at91_adc_state *st = iio_priv(idev);
> +
> + pinctrl_pm_select_sleep_state(dev);
> + clk_disable_unprepare(st->clk);
> +
> + return 0;
> +}
> +
> +static int at91_adc_resume(struct device *dev)
> +{
> + struct iio_dev *idev = platform_get_drvdata(to_platform_device(dev));
> + struct at91_adc_state *st = iio_priv(idev);
> +
> + clk_prepare_enable(st->clk);
> + pinctrl_pm_select_default_state(dev);
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops at91_adc_pm_ops = {
> + .suspend = at91_adc_suspend,
> + .resume = at91_adc_resume,
> +};
> +
> +#define AT91_ADC_PM_OPS (&at91_adc_pm_ops)
> +#else
> +#define AT91_ADC_PM_OPS NULL
> +#endif
> +
and this macro: SET_SYSTEM_SLEEP_PM_OPS
Regards
Ludovic
> static struct at91_adc_caps at91sam9260_caps = {
> .calc_startup_ticks = calc_startup_ticks_9260,
> .num_channels = 4,
> @@ -1441,6 +1475,7 @@ static struct platform_driver at91_adc_driver = {
> .driver = {
> .name = DRIVER_NAME,
> .of_match_table = of_match_ptr(at91_adc_dt_ids),
> + .pm = AT91_ADC_PM_OPS,
> },
> };
>
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
More information about the linux-arm-kernel
mailing list