[PATCH] clk: stm32f4: don't assume 48MHz clock is derived from primary PLL

[Gabriel Fernandez]

On 11/02/2016 01:44 AM, Stephen Boyd wrote:
> On 09/12, Andrea Merello wrote:
>> On Fri, Sep 9, 2016 at 11:57 AM, Alexandre Torgue
>> <alexandre.torgue at st.com> wrote:
>>> Hi Andrea,
>>>
>>> On 09/08/2016 09:01 AM, Andrea Merello wrote:
>>>> This driver just look at the PLLs configurations set by the
>>>> bootloader, but it assumes the 48MHz clock is derived from the primary
>>>> PLL; however using PLLSAI is another option for generating the 48MHz
>>>> clock.
>>>>
>>>> This patch make the driver to check for this, and eventually adjust the
>>>> clock tree accordingly
>>>
>>> Another patch-set is ongoing concerning RTC clock for stm32f4. It is
>>> developed by Gabriel Fernandez (I add him directly in this reply).
>>> Can you check with him how he plans to manage this RTC clock in order to
>>> have something similar / coherent for SAI clocks, 48MHz ....
>>>
>>> Concerning this patch,
>>> When I look at the clock tree I see that 48 MHz is only provided by pll
>>> named "PLL". So If you use PLL SAI to provide a clock at 48 MHz, you
>>> actually use SAI_A or SAI_B clock. I'm right ?
>> No, SAI_A and SAI_B are two other clocks output, that comes from
>> PLLSAI through other divisors and muxes; here I simply look at if the
>> bootloader selected the "PLL48CLK" output of the SAI PLL instead of
>> the "PLL48CLK" of the primary PLL.
>>
>>> I think we need to have something more configurable. Each special clock (SAI
>>> / RTC /LCd ...) hav0000000000000000000000000000000000000001e to be configurable and each "parents" (PLL / PLLI2S /
>>> PLLSAI) should be described at least in the driver.
>> Yes, there are probably other possible clock configurations that the
>> driver does not recognize yet; I just added this one because I found
>> it useful in real-world scenario (USB/SDcard working and core running
>> at the max speed at the same time).
>>
>>> Gabriel,
>>>
>>> Can you send a draft of your patch-set for RTC clock to Andrea, in order to
>>> discuss about this topic.
>>>
>>> Thanks
> I know this is a couple months old, but the RTC patches have been
> applied. Please resend this patch rebased onto clk-next and
> restart this discussion if this is still important.
>

Hi Stephen & Andrea,

As discuss with Andrea, i will send a second patch-set to introduce 
PLL-I2S & PLL-SAI (it will include the management of the 48 Mhz Clock)

I will probably send it today or tomorrow.


Thanks

Best Regard.


Gabriel